PrintPartner & H.P. JetDirect Interfaces


To ensure maximum compatibility between the Print Partner
10 / 14 and the H.P. JetDirect cards/boxes it may be
required to disable the Print Partners bi-directional
interface capability.

The files on this disk can switch this mode on and off
quite simply.

For these files to function correctly the printer must
be directly connected via the centronic or serial
interface to the PC being used to run these files.
i.e. not connected via the H.P. Jet Direct box at 
this point.


There are 2 batch files on this disk


JETD_ON.BAT

	This file will disable the bi-directional
	functions in the printer and should allow the 
	H.P. jetDirect box to comunicate correctly with
	the Print Partner.

JETD_OFF.BAT

	This file will enable the bi-directional functions
 	in the printer and may cause the H.P. jetDirect
	box to have problems talking to the Print Partner
	printer.

	* THIS IS THE DEFAULT CONDITION IN A NEW PRINTER *



Fujitsu Europe Ltd
Technical Support 
Oct 96