Readme.txt for FUJITSU DL Series Windows 98/Me driver
[DL3700Pro,DL3800Pro]

------------------------------------------------------------------------------
>>>This driver is provided for monochrome printing.  
   If the color kit is used, use the color printing driver stored 
   under the WIN98MEC folder.

<Overview of Contents>
     This document explains the items listed below. The driver should be used
     only after this document has been read.

       File Composition
       Install Guide
       Points to Note


<File composition>
     The following files are contained in the this directory.
       FJDL3XP.DRV   Fujitsu DL3x00 printer driver module.
       OEMSETUP.INF  Information file used for installing printer driver.
       README.TXT    Contains explanation and points to note for printer
                     driver.


<Install Guide>
     The FUJITSU DL3700Pro, DL3800Pro printer driver can be installed
     by either of 2 methods described below:

     (1)Plug and Play printer detection.

       (a)Windows 98/Me automatically detects the printer at installation
          time or during the boot process.

       (b)Plug and Play detection code will prompt the user for the appropriate
          files if they are not resident in the Windows directory, by
          displaying the "New Hardware Found" dialog box.

       (c)From the "New Hardware Found" dialog box select the option "Driver
          from disk provided by hardware manufacturer" and click "OK"
          push-button.

       (d)The "Install from disk" dialog box is displayed prompting the user to
          select the drive and directory containing the installation disk.

       (e)Insert the FUJITSU Printer driver installation disk into the A: 
          drive, use the "Browse" button to select drive A: and click "OK".

       (f)if the "Select Device" dialog box appears displaying the model-name
          "Fujitsu DL3700Pro" or "Fujitsu DL3800Pro" ,click "OK" to continue.

       (g)A dialog appears prompting the user to type the Printer name. Type
          an appropriate name or use the one supplied and click "Next>".

       (h)The next dialog prompts the user to print a test page. Select "Yes"
          or "No" and click "Finish".

       (i)Driver files are copied from the installation disk.
          N.B. The following files are not contained on the Printer
          installation disk and should be installed from the appropriate
          Windows set-up disk, if not already contained in the Windows system
          folder:
           ICONLIB.DLL, UNIDRV.DLL, UNIDRV.HLP.

       (j)Once all the appropriate files have been copied and the driver is
          installed, a test page is printed. Depending on whether the test page
          was correctly printed or not select "Yes or "No".

        The Fujitsu DL3700Pro,DL3800Pro Windows 98/Me printer driver is 
        now installed.


     The FUJITSU DL3x00Pro printer driver can be installed by the methods
     described below:

     (2)Set-up from Printers folder.

       (a)Click the Start button, point to Settings, and then click Printers.

       (b)Double-click Add Printer.

       (c)The Add Printer Wizard appears. Click "Next>".

       (d)Click "Have Disk" from the next dialog and the "Install from disk"
          dialog box is displayed prompting the user to select the drive and
          directory containing the installation disk.

       (e)Insert the FUJITSU Printer driver installation disk into the A:
          drive, use the "Browse" button to select drive A: and click the "OK"
          push-button.

       (f)A dialog box appears displaying the model-names.  Select model of
          choice and click "Next>" to continue.

       (g)A list of available Ports appears. Select an appropriate Port and
          click "Next>".

       (h)A dialog appears prompting the user to type the Printer name. Type
          an appropriate name or use the one supplied and click "Next>".

       (i)The next dialog prompts the user to print a test page. Select "Yes"
          or "No" and click "Finish".

       (j)Driver files are copied from the installation disk.
          N.B. The following files are not contained on the Printer
          installation disk and should be installed from the appropriate
          Windows set-up disk, if not already contained in the Windows system
          folder:
           ICONLIB.DLL, UNIDRV.DLL, UNIDRV.HLP.

       (k)When all files have been copied and the driver is installed a dialog
          appears querying the result of test page printout. Depending on
          whether the test page was printed correctly or not click "Yes" or
          "No".

       The Windows 98/Me printer driver is now installed.


<Points to Note>
      (1)The Fujitsu DL Series printers' serial ports only support baud
         rates of 150, 300, 600, 1200, 2400, 4800, 9600 or 19200. Other baud
         rates should not be selected in the driver when using the serial
         port. Furthermore, only 7 or 8 Data bits and 1 or 2 Stop bits are
         supported.

      (2)When [Manual feed] is specified as the Paper Source, a message box
         is  displayed  with  the instruction "Please insert paper" for each
         page printed.
         Insert paper and click the [OK] button to continue printing.

         N.B.
          In the case of some applications, the "Please insert paper" message
          is missing from the message-box. In this case, please insert paper
          and click the [OK] button to continue printing.

    (3)  Before using this printer driver for printing, 
         make the printer settings given below:

           Emulation mode:  DPL24C+
           Top margin:  2/6 inch


