Readme.txt for FUJITSU DL Series Windows2000/WindowsXP driver
[DL3700Pro,DL3800Pro]

------------------------------------------------------------------------------
>>>This driver is provided for monochrome printing.  
   If the color kit is used, use the color printing driver stored 
   under the W2KC_XPC folder.

<Overview of Contents>
     This document explains the items listed below. The driver should be used
     only after this document has been read.

       File Composition
       Install Guide
       Points to Note


<File composition>
     The following files are contained in the this directory.
       FJDL3P2K.DLL  Fujitsu DL3x00 Pro printer driver module.
       FJDL37P.GPD   A text-based file used to describe a printer for
                     Fujitsu DL3700Pro.
       FJDL38P.GPD   A text-based file used to describe a printer for
                     Fujitsu DL3800Pro.
       OEMPRINT.INF  Information file used for installing printer driver.
       README.TXT    Contains explanation and points to note for printer
                     driver.


<Install Guide>
     Beforehand, please set [File signature verification] in <Ignore> or 
     <Warn> in [Driver Signing Options] on the system properties of the 
     PC.

     The FUJITSU DL3700Pro, DL3800Pro printer driver can be installed
     by either of 2 methods described below:
    
   (1) Windows2000
     (1-1)Plug and Play printer detection.

       (a)Windows2000 automatically detects the printer at installation 
          time or during the boot process.

       (b)Plug and Play detection code will prompt the user for the
          appropriate files if they are not resident in the Windows 
          directory, by displaying the "New Hardware Found" dialog box.

       (c)From the "New Hardware Found" dialog box select the option
          "Driver from disk provided by hardware manufacturer" and 
          click "OK" push-button.

       (d)The "Install from disk" dialog box is displayed prompting
          the user to select the drive and directory containing the
          installation disk.

       (e)Insert the FUJITSU Printer driver installation disk into 
          the A: drive, use the "Browse" button to select drive A:
          and click "OK".(When the FD-drive is A.)

       (f)if the "Select Device" dialog box appears displaying the 
          model-name "Fujitsu DL3700Pro" or "Fujitsu DL3800Pro",
          click "OK" to continue.

       (g)A dialog appears prompting the user to type the Printer 
          name. Type an appropriate name or use the one supplied 
          and click "Next>".

       (h)The next dialog prompts the user to print a test page. 
          Select "Yes" or "No" and click "Finish".

       (i)The message is displayed as [Digital Signature Not Found], 
          please select "Yes" and install it in the question [Do you 
          want to continue the installation?]. 

       (j)Once all the appropriate files have been copied and the 
          driver is installed, a test page is printed. Depending on 
          whether the test page was correctly printed or not select
          "Yes or "No".

     (1-2-1)Set-up from Printers folder.

       (a)Click the Start button, point to Settings, and then click 
          Printers.

       (b)Double-click Add Printer.

       (c)The Add Printer Wizard appears. Click "Next>".

       (d)Click "Have Disk" from the next dialog and the "Install from
          disk" dialog box is displayed prompting the user to select 
          the drive and directory containing the installation disk.

       (e)Insert the FUJITSU Printer driver installation disk into the
          A: drive, use the "Browse" button to select drive A: and click
          the "OK" push-button.(When the FD-drive is A.)

       (f)A dialog box appears displaying the model-names.  Select model
          of choice and click "Next>" to continue.

       (g)A list of available Ports appears. Select an appropriate Port 
          and click "Next>".

       (h)A dialog appears prompting the user to type the Printer name. 
          Type an appropriate name or use the one supplied and click 
          "Next>".

       (i)The next dialog prompts the user to print a test page. Select
          "Yes" or "No" and click "Finish".
    
       (j)The message is displayed as [Digital Signature Not Found], please
          select "Yes" and install it in the question [Do you want to continue
          the installation?].

       (k)When all files have been copied and the driver is installed a 
          dialog appears querying the result of test page printout. Depending 
          on whether the test page was printed correctly or not click "Yes"
          or "No".

      (1-2-2)Set-up from Printers folder and automatically detect and install
           my Plug and Play printer.

       (a)The local printer is selected, [Automatically detect and install
          my Plug and Play printer] check-box is checked, and click "Next>".

       (b)The model name of connected printer is displayed.

       (c)Click "Next>" if displayed as [New Printer Detection].

       (d)The "Install from disk" dialog box is displayed prompting the user
          to select the drive and directory containing the installation disk.

       (e)Insert the FUJITSU Printer driver installation disk into the A: 
          drive, use the "Browse" button to select drive A: and click "OK".
          (When the FD-drive is A.)

       (f)if the "Select Device" dialog box appears displaying the model-name
          "Fujitsu DL3700Pro" or "Fujitsu DL3800Pro" ,click "OK" to continue.

       (g)A dialog appears prompting the user to type the Printer name. Type
          an appropriate name or use the one supplied and click "Next>".

       (h)The next dialog prompts the user to print a test page. Select "Yes"
          or "No" and click "Finish".

       (i)The message is displayed as [Digital Signature Not Found], please
          select "Yes" and install it in the question [Do you want to continue
          the installation?].

       (j)Once all the appropriate files have been copied and the driver is
          installed, a test page is printed. Depending on whether the test 
          page was correctly printed or not select "Yes or "No".


   (2) WindowsXP
     (2-1)Plug and Play printer detection.

       (a)WindowsXP automatically detects the printer at installation 
          time or during the boot process.

       (b)Plug and Play detection code will prompt the user for the
          appropriate files if they are not resident in the Windows 
          directory, by displaying the "Found New Hardware Wizard"
          dialog box.

       (c)"Install from a list or specific location" to select and click 
          "Next".

       (d)"Plese chose your search and installation options" dialog
          is displayed prompting the user to select "include this location
          in the search" and A:\Win2k_xp to select , click "Next".
          (When the FD-drive is A.)

       (e)"The software you are installing for this hardware" dialog
          is displayed prompting the user to select "Continue Anyway".

       (f)"Completing the Found New Hardware Wizard" dialog is displayed
          prompting, you click the "Finish".

      (2-2-1)Set-up from Printers folder.

       (a)Click the Start button, point to Settings, and then click 
          Printers and FAXes.

       (b)Double-click Add Printer.

       (c)The Add Printer Wizard appears. Click "Next".

       (d)Select Local printer attached to this computer and click "Next".

       (e)Select a Printer Port and click "Next".

       (f)Insert the FUJITSU Printer driver installation disk into the
          A: drive, use the "Browse" button to select drive A:\Win2k_xp
          and click the "OK".(When the FD-drive is A.)

       (g)A dialog box appears displaying the model-names.  Select model
          of choice and click "Next" to continue.

       (h)A dialog appears prompting the user to type the Printer name. 
          Type an appropriate name or use the one supplied and click 
          "Next".

       (i)The next dialog prompts the user to print a test page. Select
          "Yes" or "No" and click "Finish".
    
       (j)"The software you are installing for this hardware" dialog
          is displayed prompting the user to select "Continue Anyway".

       (k)When all files have been copied and the driver is installed a 
          dialog appears querying the result of test page printout. Depending 
          on whether the test page was printed correctly or not click "Yes"
          or "No".

      (2-2-2)Set-up from Printers folder and automatically detect and install
           my Plug and Play printer.

       (a)The local printer is selected, [Automatically detect and install
          my Plug and Play printer] check-box is checked, and click "Next".

       (b)The model name of connected printer is displayed.

       (b)Plug and Play detection code will prompt the user for the
          appropriate files if they are not resident in the Windows 
          directory, by displaying the "Found New Hardware Wizard"
          dialog box.

       (c)"Install from a list or specific location" to select "Next".

       (d)"Plese chose your search and installation options" dialog is
          displayed prompting the user to select "include this location in 
          the search" and A:\Win2k_xp to select "Next".
          (When the FD-drive is A.)

       (e)"The software you are installing for this hardware" dialog
          is displayed prompting the user to select "Continue Anyway".

       (f)"Completing the Found New Hardware Wizard" dialog is displayed
          prompting, you click the "Finish".

       (g)Once all the appropriate files have been copied and the driver is
          installed, a test page is printed. Depending on whether the test 
          page was correctly printed or not select "Yes or "No".



<Points to Note>
      (1)The Fujitsu DL Series printers' serial ports only support baud rates
         of 150, 300, 600, 1200, 2400, 4800, 9600 or 19200. Other baud rates 
         should not be selected in the driver when using the serial port. 
         Furthermore, only 7 or 8 Data bits and 1 or 2 Stop bits are supported.

      (2)Before using this printer driver for printing, 
         make the printer settings given below:

           Emulation mode:  DPL24C+
           Top margin:  2/6 inch


