===============================================================================

                        Microsoft Windows95 English

                  FUJITSU DL6400Pro/DL6600Pro Printer Driver

                   Copyright(C) 2004 FUJITSU ISOTEC LIMITED
===============================================================================

This printer driver works on the following operating systems:

  Microsoft(R) Windows(R) 95 English (referred to as Windows95)

This printer driver is for FUJITSU DL6400Pro/DL6600Pro printers.



Contents

1. Printer driver operating environment
2. Printer driver configuration
3. Printer driver setup
  3.1 Before setting up
  3.2 Setup from "New Hardware Found"
    3.2.1 for 4.00.950 or 4.00.950A
    3.2.2 for 4.00.950B or 4.00.950C
  3.3 Setup from "Add Printer"
4. Printer driver setup method
5. Others
- About the trademark

NOTE: This driver is for FUJITSU DL6400Pro/DL6600Pro printers.
      Do not use it on other printers.
      When printing using Windows95, change the printer settings back to the
      factory default.
      Otherwise printer may not function as expected.



1. Printer driver operating environment

- Hardware
  PC's with the English-version Windows95

- Target operating system
  Windows95 (English-version)

NOTE:  This product only operates on English-version Windows95.



2. Printer driver configuration

  FUJITSU DL6400Pro/DL6600Pro printer driver consists of the following files:

   FJDL6XP.DRV    FUJITSU DL6400Pro/DL6600Pro printer driver
   OEMSETUP.INF   Setup information file
   README.TXT     This file



3. Printer driver setup

---------------------
3.1 Before setting up
---------------------
- Prepare the following for setup:
   1) Windows95 operating system                      (CD-ROM)
   2) FUJITSU DL6400Pro/DL6600Pro Printer Driver Disk (this disk)

- Set up FUJITSU DL6400Pro/DL6600Pro from "New Hardware Found".
  If "New Hardware" is not found, set up from "Add Printer".

- If the FUJITSU DL6400Pro/DL6600Pro printer driver has already been set up,
  delete it and set up again.

- For users who use DL6600Pro. Please change the name of "DL6400Pro"
  to "DL6600Pro".

------------------------------------
3.2 Set up from "New Hardware Found"
------------------------------------
When setting up from "New Hardware Found", the screen may appear differently
depending on the version of Windows95 used.
Click the right button of the mouse on the "My computer" icon and select
"System properties" from "General".


3.2.1  for 4.00.950 or 4.00.950a
================================
a. Connect the printer to the PC and turn on the printer.

b. Turn on the PC, and start Windows95.  Restart Windows95 if it is already
   started.

c. When "New Hardware Found" dialogue appears, select "Driver from disk
   provided by hardware manufacturer", and click "OK".

d. Insert this printer setup disk in the FD drive.

e. Enter "A:\Win95" (if the A: is the FD drive) into
   the "distributed file copy source", and click OK.
   NOTE: When the dialogue "insert disk" appears, click "OK", enter
         "A:\Win95"(if the A: is the FD drive) into the "file copy source",
         and click OK.
         In addition, insert Windows95 system CD-ROM if required, and
         click "OK".  Enter "D:\WIN95 " into "file copy source" or click
         "reference" and select "D:\WIN95".

f. Follow the directions and continue with the setup.
   NOTE: If there is a conflict (if "there is a newer file than the one to be
         copied, and users are advised to use the already existing file"
         appears), click "yes".

g. Added printer icon appears in the "Printers" folder".

The printer driver setup is now complete.


3.2.2  for 4.00.950B or 4.00.950C:
==================================
a. Connect the printer to the PC and turn on the computer.

b. Turn on the PC, and start Windows95.  Restart Windows95 if it is already
   started.

c. When "Update Device Driver Wizard" appears, click "next".

d. Click "Other Locations...".

e. Insert the printer setup disk in the FD drive

f. Enter "A:\Win95" (if the A: is the FD drive) as "Location", and click "OK".

g. When "Update Device Driver Wizard" appears, click "Finish".

h. Follow the instructions on the screen and continue with the setup.
   NOTE: When the dialogue "Insert Disk" appears, click "OK", enter"A:\Win95"
         (if A: is the FD drive) for the "Copy files from:", and click "OK".
         The user may be required to insert the Windows95 system CD-ROM.
         Click "OK" after inserting the CD-ROM.  Enter "D:\WIN95" for the
         "Copy files from:" or click  "Browse" and select "D:\WIN95".

i. An icon of the added printer will appear in the "printer" folder.

Printer driver setup is now complete.



----------------------------
3.3 Setup from "Add Printer"
----------------------------
Start Add Printer Wizard.
The following is the FUJITSU DL6400Pro setup procedure after Windows95
is started up.

a. Go to "Start" -> "Settings" ->"Printers".

b. Double-click "Add Printer".

c. The "Add Printer Wizard" will appear.
   Follow the instructions on the screen and proceed.

d. When the printer list from the manufacturer appears click on "Have Disk".

e. Insert the printer setup disk into the FD drive, enter "A:\Win95" (if A: is
   the FD drive) as the "Copy manufacture's files from:", and click "OK".

f. The model names will be listed in the "Printers" list box.  Select the model
   and click  "next".
   NOTE: When the message "A driver is already installed for this printer.
         Would you like to keep the existing driver or use the new driver one?
         Your programs may print differently if you use the new driver",
         appears, select "Replace existing driver".

g. Select the "Available ports".

h. Confirm the printer name, and set it as the default printer, and click on
   "next".

i. Perform a printout test if desired, and select "next".
   NOTE: The user may be required to insert the Windows95 system CD-ROM.  Click
         "OK" after inserting the CD-ROM.  Enter "D:\WIN95" for the "Copy files
         from:" or click  "Browse" and select "D:\WIN95".

j. As in [i.], when "Print Test Page" is selected, a dialogue box will appear
   when printing is completed.  Click the "OK" or "No" button.
   Note with Test Page:
     - Printing will proceed based on the printer driver settings at the time.
     - The default values of the page-feeding method is "automatically select"
       with paper size set and "Letter", therefore please prepare Letter paper
       for the test page.
     - Change the setting when using a different size of paper for the test
       page.

k. When the installation is completed, an icon of the added printer will appear
   in the "Printers" folder.



4. Printer driver setup method

- The printer driver settings can be done by going to the "Printers" folder and
  select the printer, "File" - "Properties".

- Refer read the chapter of software in the user's manual for further details.



5. Others

a. The emulation for this driver is in the "DPL24C+" mode.
   Make sure the setting of the printer installation corresponds to it.

b. Users are required to adjust devices for such as the paper insertion.
   Please make sure the paper settings, as well as the settings from the
   operation panel correspond to the printer.

c. Printing from Windows3.1 application software under the Windows95
   environments may give different results.

d. Some specified printer fonts from the application may not be used depending
   on the data format.

e. Based on the application, zoom-in/out printing may always result in
   10.5-size fonts.

f. Paper with a length of 3 inches - 14 inches isruled with a width of 15
   inches.
   When using paper with a width less than 15 inches, please make adjustments
   to the right margin of the application not to exceed the maximum possible
   range.

g. If printing is cancelled from the printer port during printing, restart the
   printer.
   Continuing printing without restarting the printer may result in problems
   such as garbled texts.

h. A message "Please insert paper" will appear for every single page when the
   user selects to use the "Manual feed".  Click "OK" and proceed the printing.
   NOTE: For some applications, the message "Please insert paper" may not
         appear in the dialogue box.  Simply click the "OK" button and printing
         will proceed.

i. On multiple User-Defined sizes...
   Set up the printer driver for every User-Defined size.  The driver can be
   used interchangeably by entering the sizes as the driver names.

j. The Fujitsu DL Series printers' serial ports only support baud rates of 150,
   300, 600, 1200, 2400, 4800, 9600 or 19200. Other baud rates should not be
   selected in the driver when using the serial port.
   Furthermore, only 7 or 8 Data bits and 1 or 2 Stop bits are supported.

k. Before using this printer driver for printing, make the printer settings
   given below:

      Emulation mode:  DPL24C+
      Top margin:  2/6 inch



- About the trademark
    Company names and product names mentioned above are registered trademarks
    or trademarks of each company.

[End]
