===============================================================================

                       Microsoft WindowsNT4.0 English

                  FUJITSU DL6400Pro/DL6600Pro Printer Driver

                   Copyright(C) 2004 FUJITSU ISOTEC LIMITED

===============================================================================

This printer driver works on the following operating systems:

  Microsoft(R) Windows NT(R) 4.0 English (referred to as WindowsNT4.0)

This printer driver is for DL6400Pro/DL6600Pro printers.



Contents

1. Printer driver operating environment
2. Printer driver configuration
3. Printer driver setup
  3.1 Before setting up
  3.2 Setup method
4. Printer driver setup method
5. Others
- About the trademark

Note: This driver is for FUJITSU DL6400Pro/DL6600Pro printers.
      Do not use with other printers.
      When printing using WindowsNT4.0, change the printer settings back to the
      factory default.
      Otherwise printer may not function as expected.



1. Printer driver operating environment

- Hardware
  PC's with the English-version WindowsNT4.0

- Operating system
  WindowsNT4.0 (English-version)

NOTE: This product only operates on English-version WindowsNT4.0.



2. Printer driver configuration

   FUJITSU DL6400Pro/DL6600Pro printer driver consists of the following files:

   FJDL4P6.DLL     FUJITSU DL6400Pro/DL6600Pro printer driver resource DLL file
   FJDLN4P6.INF    Setup information file
   README.TXT      This file



3. Printer driver setup
---------------------
3.1 Before setting up
---------------------
- Prepare the following for setup:
   1) English-version WindowsNT Workstation4.0 or WindowsNT Server4.0
      operating system (CD-ROM)
   2) FUJITSU DL6400Pro/DL6600Pro Printer Driver Disk (this disk)

- When setting up, log on with an Administrator account.

- The printer driver for FUJITSU DL6400Pro/DL6600Pro cannot be installed as an
  alternative driver.

- Do not select "Sharing" when installing the printer driver.

- If the FUJITSU DL6400Pro/DL6600Pro printer driver has already been set up,
  delete it and set up again.

- For users who use DL6600Pro. Please change the name of "DL6400Pro"
  to "DL6600Pro".



----------------
3.2 Setup method
----------------
Start setting up the printer driver by activating the "Add Printer Wizard".
The following is the FUJITSU DL6400Pro/DL6600Pro setup procedure after 
WindowsNT4.0 is started up.


a. Go to "My Computer" -> "Printers".

b. Double-click "Add Printer".

c. When "Add Printer Wizard" appears, select "My Computer", and click "next".

d. Specify an available port ("Add Port" and "Configure Port" if necessary),
   and click "next".

e. Click "Have Disk...", and a dialogue box "Install From Disk" will appear.

f. Insert the FUJITSU DL6400Pro/DL6600Pro driver disk, and enter "A:\Winnt40"
   as the "Copy manufacture's files from:", and click OK.
   Note: The FD drive above is assumed to be A:, make changes if necessary.

g. The model names will be listed in the "printers" list box.  Select the model
   and click on "next".
   NOTE: When the message "A driver is already installed for this printer.
         Would you like to keep the existing driver or use the new driver one?
         Your programs may print differently if you use the new driver",
         appears, select "Replace existing driver".

h. Enter the printer model name, and specify whether the printer will be used
   as the default printer, and select "next".

i. Select "not shared" for the specified printer, and click "next".

j. Perform a printout test if desired, and select "next".
   NOTE: The user may be required to insert the WindowsNT4.0 system CD-ROM.
         Click "OK" after inserting the CD-ROM.  Enter "D:\I386" (if D: is
         the CD-ROM drive)for the "Copy files from:" or click  "Browse" and
         select "D:\I386".

k. After installation, return to the "Printers" dialogue box.
   Make sure the printer has been added in the "Printers" dialogue box.

l. As in [j.], when "Print Test Page" is selected, a dialogue box will appear
   when printing is completed.  Click the "Yes" or "No" button.
   Note with Test Page:
     - Printing will proceed based on the printer driver settings at the time.
     - The default values of the page-feeding method is "automatically select"
       with paper size set and "Letter", therefore please prepare Letter paper
       for the test page.
     - Change the setting when using a different size of paper for the test
       page.

m. Go to "File" from the menu bar and select "Close" to close the dialogue box.

Printer driver setup is now completed.



4. Printer driver setup method

- The printer driver settings can be adjusted by going to the "Printers" folder
  and selecting the printer then going to "File" - "Document Defaults" or by
  going to "Properties" - "Device settings".

- Refer read the chapter of software in the user's manual for further details.



5. Others

a. The emulation for this driver is in the "DPL24C+" mode.
   Make sure the setting of the printer installation corresponds to it.

b. Users are required to adjust devices for such as the paper insertion.
   Please make sure the paper settings, as well as the settings from the
   operation panel correspond to the printer.

c. Printing from Windows95 application software under the WindowsNT4.0
   environments may give different results.

d. The contents of "Properties" of the printer driver and "Printing
   Preferences" of the printer may overlap.  Please make necessary adjustments
   to avoid any possible malfunction.

e. Some specified printer fonts from the application may not be used depending
   on the data format.

f. Paper size from the "Server Properties" can be set to a maximum width of
   15 inches.  Adjust the right and left margins not the exceed an 13.6 inch
   paper width as the data may not be properly printed.

g. Based on the application, zoom-in/out printing may always result in
   10.5-size fonts.

h. Paper with a length of 3 inches - 14 inches isruled with a width of 15
   inches.
   When using paper with a width less than 15 inches, please make adjustments
   to the right margin of the application not to exceed the maximum possible
   range.

i. If printing is cancelled from the printer port during printing, restart the
   printer.
   Continuing printing without restarting the printer may result in problems
   such as garbled texts.

j. The DL6400Pro, DL6600Pro printers' serial ports only support baud rates of
   150, 300, 600, 1200, 2400, 4800, 9600 or 19200. Other baud rates should not
   be selected in the driver when using the serial port.
   Furthermore, only 7 or 8 Data bits , 1 or 2 Stop bits and XON/OFF or DTR or
   REV-CH Protocols are supported.

k. Before using this printer driver for printing, make the printer settings
   given below:

      Emulation mode:  DPL24C+
      Top margin:  2/6 inch



- About the trademark
    Company names and product names mentioned above are registered trademarks
    or trademarks of each company.

[End]
