README.TXT
============================================================================
                          Microsoft WindowsNT4.0

                     FIT FP-410 Raster Printer Driver

                              Version 3.40

                  Copyright(C) 2003 FUJITSU ISOTEC LIMITED
============================================================================

 'FP-410 Raster printer driver' is the one that activates in Microsoft Windows
 NT4.0.
 By using this driver, it can print on FP-410 printer from Windows NT4.0.


Contents
1. Printer driver operating environment
2. Printer driver configuration
3. Printer driver setup
4. Printer processor setup
  4.1 Before setup
  4.2 Setup method
5. Setting method of the printer driver
6. Other items of caution
***
 About the trademark

***** Attention **********
  This printer driver is the one for FP-410 use .
  Do not use it on the other printers.
  Return to the shipment value of the function setting content of the printer
  when print from Windows NT4.0.
  The expected printing result can't be got by using other values.


1. Printer driver operating environment

   Hardware      Computer with Windows NT4.0 installed
   Target OS     WindowsNT4.0 


2. Printer driver configuration

   The FP-410 Raster printer driver is composed of the following files.

   FP410WNR.DLL    FP-410 Raster driver
   FP410WNR.INF    Setup-use information file
   README.TXT      This file
   FP410PP.DLL     FP-410 Raster Printer processor
   INSTPP.EXE      Printer processor installed execution file


3. Printer driver setup

   The FIT FP-410 Raster printer driver can be installed described
   below:

   Set-up from Printers folder.

    a. Click the Start button, point to Settings, and then click Printers.

    b. Double-click Add Printer.

    c. The Add Printer Wizard appears. Click "Next>".

    d. A list of available Ports appears. Select an appropriate Port and
       click "Next>".

    e. Click "Have Disk" from the next dialog and the "Install from disk"
       dialog box is displayed prompting the user to select the drive and
       directory containing the installation disk.

    f. Insert the FUJITSU Printer driver installation disk into the A: drive,
       use the "Browse" button to select folder WINNT40 of drive A: and click
       the "OK" push-button.

    g. A dialog box appears displaying the model-names "FIT FP-410 Raster.
       Select model of choice and click "Next>" to continue.

    h. A dialog appears prompting the user to type the Printer name.
       Type an appropriate name or use the one supplied and click "Next>".

    i. The next dialog prompts the user to print a test page. Select "No"
       and click "Finish".

    j. Driver files are copied from the installation disk.
       N.B. The following files are not contained on the Printer installation
            disk and should be installed from the appropriate Windows set-up
            disk, if not already contained in the Windows printer driver
            folder:
            RASDD.DLL, RASDDUI.DLL, RASDDUI.HLP.

    k. Restart Windows.

   The FIT FP-410 Raster Windows Nt4.0 printer driver is now installed.


4. Printer processor setup

----------------
4.1 Before setup
----------------
  1. Prepare the following for setup:
       - FIT FP-410 setup disk "this disk"
  2. When executing the setup, be sure to log off by using the Administrator
     account.
  3. Be sure to install the FP-410 print processor.
     Without installation, incorrect printing may result.

----------------
4.2 Setup method
----------------
  The printer processor setup is executed from the command prompt.
  Here is the explanation of the setup process with Windows NT 4.0 started.

  1. Select the "start" -> "Programs" -> "Command Prompt".

  2. Set the FIT FP-410 setup disk in the FD driver.

  3. Set the current driver as the FD driver input A: if the FD driver is A:,
     and move the directory input CD WINNT40.
     *** The current driver and directory must be moved or the error message
         "error=2" appears and installation cannot be executed.

  4. Input "instpp 1".

  5. Input "instpp 0" to uninstall the printer processor.
     *** After successful installation, confirm that the following message
         appears.
            CopyFile"" / success
            AddPrintProcessor / success

  6. When installation is finished, select "my computer" a "printers".

  7. Select "FIT FP-410 Raster" -> "properties" -> "Printer Processor".

  8. Select FP410PP printer processor, Always spool RAW datatype check-box,
     is checked, and click "OK".

  9. Click "OK" to close FIT FP-410 Raster property.

  Then the installation of the printer processor is finished.


5. Setting method of the printer driver

  Setting of the printer driver is executed in this way: Select the printer
  from the "printers" folder and execute from the "file" -> "Document Defaults"
  or "properties" -> "Device settings".


6. Other items of caution

  1. Select the paper size of 80 x 2039 mm if using paper size larger than A4.

  2. To uninstall the print processor, be sure to first delete the printer
     driver.
     If the printer driver is not deleted and the uninstall print processor is
     executed, the error message "error=1798" appears and uninstallment cannot
     be executed.

  3. When the printer processor has been installed, open the FIT FP-410 Raster
     property and execute the following settings:

       a. Click "General" -> "Print Processor", and check the "Always spool
          the RAW datatype".

     Without this setting, unexpected printing may result.

  4. At times incorrect printing occurs by reducing the margin depending on
     the application used.
     Set the margin setting beyond the following data.
     +---------------------+------------------------+------------------------+
     |                     |       Portrait         |       Landscape        |
     |   Paper Size        +-----------+------------+-----------+------------+
     |                     |Left margin|Right margin|Left margin|Right margin|
     +---------------------+-----------+------------+-----------+------------+
     |80x297mm( 48column ) |  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |80x297mm( 42column ) |  8.0mm    |  8.0mm     |  8.0mm    |  8.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |58x297mm( 35column ) |  3.0mm    |  2.5mm     |  2.5mm    |  3.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |58x297mm( 32column ) |  5.0mm    |  5.0mm     |  5.0mm    |  5.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |80x2039mm( 48column )|  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |80x2039mm( 42column )|  8.0mm    |  8.0mm     |  8.0mm    |  8.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |58x2039mm( 35column )|  3.0mm    |  2.5mm     |  2.5mm    |  3.0mm     |
     +---------------------+-----------+------------+-----------+------------+
     |58x2039mm( 32column )|  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
     +---------------------+-----------+------------+-----------+------------+

  5. When you choose "Receipt (top of form 4.5mm)", please set the length of
     a paper to 23.2mm or more.

  6. In using this printer in Windows environment, set "Auto Recovery"
     of the "Cover Open" settings.

  7. In case of copy printing, check "Collate".
     When unchecked the box of "Collate", printing may not be worked properly
     depending on the used application.
     Also, when "Collate" is selected in using the application and its
     application produces the print job by copy units, the setting of "Cut of
     Print End" may be invalid.

  8. Print start position becomes the top margin value set by the application
     plus the top margin value needed by Printer Driver. Confirm the print
     start position before printing. 

  9. This Printer Driver does not support Two Color printing.

 10. This Printer Driver does not support "Printer Font Selection".
     Select the TrueType font in Windows, and print.

 11. In case of Serial Interface using, set "Port Settings" by clicking
     "Details" of Printer Property. If the condition is 
     wrong, the desired printing results cannot be obtained.



***** About the trademark **********

  The names of the companies and products are the registered trademarks or
  trademarks of different companies.

