README.TXT
============================================================================

                             Microsoft WindowsXP

                      FIT FP-410 Raster Printer Driver

                                Version 1.1

                   Copyright(C) 2003 FUJITSU ISOTEC LIMITED
============================================================================

  FP-410 Raster printer driver is the one that activates in Microsoft Windows
  XP.
  By using this driver, it can print on FP-410 printer from Windows XP.


Contents
1. Printer driver operatin environment 
2. Printer driver configuration 
3. Printer driver setup
  3.1 Before setup
  3.2 Setup method using printer add wizard (Not using Plug & Play)
  3.3 Setup method using printer add wizard (Using Plug & Play)
  3.4 Execution method for Plug & Play
4. Printer processor setup
  4.1 Before setup
  4.2 Setup method
5. Setting method of the printer driver
6. Other items of caution
***
About the trademark


***** Caution *****
  This printer driver is for FP-410.
  Do not use FP-410 on other printers.
  When printing from Windows XP, return the printer function setting contents
  to the value prior to shipment.
  The expected printing result cannot be acquired by using other values.


1. Printer driver operating environment

   Hardware     Computer with Windows XP installed
   Target OS    Widows XP


2. Printer driver configuration

     FP-410 Raster printer driver is composed of the following files:

     FP410W2R.DLL    FP-410 Raster driver
     FP410W2R.GPD    A text-based file used to describe a printer for 
                     FP-410 Raster
     FP410W2R.INF    Setup-use information file
     FP410MON.DLL    FP-410 Raster language monitor
     FP410PP.DLL     FP-410 Raster printer processor
     README.TXT      This file


3. Printer driver setup

   -----------------
   3.1  Before setup
   -----------------
     1. Prepare the following for setup:
         - FIT FP-410 setup disk (this disk)
     2. When executing setup, be sure to log in by using the Administrator
        account.
     3. It is impossible to install a substitute driver for the FP-410 Raster
        printer driver.
     4. Set the gfile signature confirmationh as gignoreh or gwarnh at
        the gdriver signature optionh of the PC system property in advance.
     5. When installing the printer driver, do not select gshareh.
     6. If the FIT FP-410 Raster printer driver has already been set up, then
        delete and setup it up.

   ---------------------------------------------------------------------
   3.2  Setup method by using Add printer wizard (Not using Plug & Play)
   ---------------------------------------------------------------------

     a. Click the Start button, point to Settings, and then click
        Printers and FAXes.

     b. Double-click Add Printer.

     c. The Add Printer Wizard appears. Click "Next>".

     d. Select Local printer attached to this computer and click "Next".

     e. Select a Printer Port and click "Next".

     f. Insert the FUJITSU Printer driver installation disk into the
        A: drive, use the "Browse" button to select drive A:\WinXP
        and click the "OK".(When the FD-drive is A.)

     g. A dialog box appears displaying the model-names.
        Select model of choice and click "Next" to continue.

     h. A dialog appears prompting the user to type the Printer name. 
        Type an appropriate name or use the one supplied and click "Next".

     i. The next dialog prompts the user to print a test page.
        Select "No" and click "Finish".

     j. The message is displayed as [Digital Signature Not Found], please
        select "Yes" and install it in the question [Do you want to continue
        the installation?].

     k. Select the "no" if " Print the test page?" is indicated, and then the
        (finish).

        *** After installation of Printer Driver, open the Printer Property,
            and set the following settings. The correct print results cannot
            be obtained without these settings.

     l. Restart Windows.

    Then the setup of the printer driver is finished.
    Set the Printer Property next.

   -----------------------------------------------------------------
   3.3  Setup method by using printer add wizard (Using Plug & Play)
   -----------------------------------------------------------------

     a. The local printer is selected, [Automatically detect and install
        my Plug and Play printer] check-box is checked, and click "Next>".

     b. The model name of connected printer is displayed.

     c. Click "Next>" if displayed as [New Printer Detection].

     d. The "Install from disk" dialog box is displayed prompting the user
        to select the drive and directory containing the installation disk.

     e. Insert the FUJITSU Printer driver installation disk into the A: 
        drive, use the "Browse" button to select folder WinXP of drive A:
        and click "OK".  (When the FD-drive is A.)

     f. If the "Select Device" dialog box appears displaying the model-name
        "FIT FP-410 Raster, click "OK" to continue.

     g. A dialog appears prompting the user to type the Printer name. Type
        an appropriate name or use the one supplied and click "Next>".

     h. The next dialog prompts the user to print a test page. Select "No"
        and click "Finish".

        *** After installation of Printer Driver, open the Printer Property,
            and set the following settings. The correct print results cannot
            be obtained without these settings.

     i. The message is displayed as [Digital Signature Not Found], please
        select "Yes" and install it in the question [Do you want to continue
        the installation?].

     j. Restart Windows.

    Then the setup of the printer driver is finished.
    Set the Printer Property next.

   ------------------------------------
   3.4  Execution method by Plug & Play
   ------------------------------------

     a. Windows XP automatically detects the printer at installation time or
        during the boot process.

     b. Plug and Play detection code will prompt the user for the appropriate
        files if they are not resident in the Windows directory, by displaying
        the "New Hardware Found" dialog box.

     c. From the "New Hardware Found" dialog box select the option "Driver from
        disk provided by hardware manufacturer" and click "OK" push-button.

     d. The "Install from disk" dialog box is displayed prompting the user to
        select the drive and directory containing the installation disk.

     e. Insert the FUJITSU Printer driver installation disk into the A: drive,
        use the "Browse" button to select folder WinXP of drive A: and click
        "OK".  (When the FD-drive is A.)

     f. If the "Select Device" dialog box appears displaying the model-name
        "FIT FP-410 Raster (Black Mark)", click "OK" to continue.

     g. A dialog appears prompting the user to type the Printer name.
        Type an appropriate name or use the one supplied and click "Next>".

     h. The next dialog prompts the user to print a test page.
        Select "No" and click "Finish".

        *** After installation of Printer Driver, open the Printer Property,
            and set the following settings. The correct print results cannot
            be obtained without these settings.

     i. The message is displayed as [Digital Signature Not Found], please
        select "Yes" and install it in the question [Do you want to continue
        the installation?].

     j. Restart Windows.

    Then the setup of the printer driver is finished.
    Set the Printer Property next.


4. Setup of the printer processor

   -----------------
   4.1  Before setup
   -----------------
     1. Prepare the following for setup:
          - FIT FP-410 setup disk (this disk)
     2. Be sure to  logon by using the account with  the Administrator right
        when execute the setup.
     3. Be sure to install the printer processor for FP-410 use.
        No correct printing result can be got without the install.

   ----------------
   4.2 Setup method
   ----------------
   The procedure of settings in Windows XP will be explained here.

    1. "Start"->"Settings"->"Printer".

    2. Select "FIT FP-410 Raster", and select "File"->"Property".

    3. Select "Advanced", and uncheck " Enable advanced printing features".

    4. In case of installation of Printer Driver Plug&Play, click "Print
       Processor", select "FP410PP" with Print Processor, and click OK.

    5. Click "Apply"->"OK", and close the Property of "FIT FP-410 Raster
       (Black Mark)".



5. Setting method of the printer driver

   The setting of the printer driver is executed in this way: select the
   printer from the printer folder, and then executed from [file]->[Printing
   Preferences ] or [properties]->[Device Settings].



6. Other attention items

   1. Select the paper size of 80x2039mm if the using paper size is bigger
      than A4.

   2. Select the [settings]->[printers]->[FIT FP-410 Raster]->[properties] when
      the install is finished.

   3. Select the printer port that FP-410 printer is connecting at the
      [ports] tab.
      *** The printer port right after the install is LPT1:.
      *** Click the [ports] and  set the communication conditions if the
          COM port is selected. 

   4. Sometimes incorrect printing will happen by reducing the margin according
      to the using application.
      Set the margin setting beyond the following data.

      +---------------------+------------------------+------------------------+
      |                     |       Portrait         |       Landscape        |
      |   Paper Size        +-----------+------------+-----------+------------+
      |                     |Left margin|Right margin|Left margin|Right margin|
      +---------------------+-----------+------------+-----------+------------+
      |80x297mm( 48column ) |  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |80x297mm( 42column ) |  8.0mm    |  8.0mm     |  8.0mm    |  8.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |58x297mm( 35column ) |  3.0mm    |  2.5mm     |  2.5mm    |  3.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |58x297mm( 32column ) |  5.0mm    |  5.0mm     |  5.0mm    |  5.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |80x2039mm( 48column )|  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |80x2039mm( 42column )|  8.0mm    |  8.0mm     |  8.0mm    |  8.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |58x2039mm( 35column )|  3.0mm    |  2.5mm     |  2.5mm    |  3.0mm     |
      +---------------------+-----------+------------+-----------+------------+
      |58x2039mm( 32column )|  4.0mm    |  4.0mm     |  4.0mm    |  4.0mm     |
      +---------------------+-----------+------------+-----------+------------+

   5. Attention items of the USB Model.
      a. Sometimes the new hardware detecting wizard of the unidentified device
         will be executed with the printer power on.
         On this occasion, install the printer driver according to the
         (3.4  Execution method by Plug & Play).
         Sometimes the new hardware detecting wizard maybe executed every time
         the printer power turns on without installing the printer driver.

      b. The FP-410 printer driver to every connecting port will be set if the
         connecting USB port is changed.
         (e.g. FIT FP-410 Raster (copy 2) etc.)
         Since every setting of the printer driver is the initial value, so
         change the setting according to the using state.
         Be sure to set the following items. No excepted printing result can be
         got without this setting.

          * Select the "Print directly to the printer" at the detailed setting.
          * Click the "print processor" and select the FP410PP at the
            Advanced.

   6. When you choose "Receipt (top of form 4.5mm)", please set the length of
      a paper to 23.2mm or more.

   7. In using this printer in Windows environment, set "Auto Recovery"
      of the "Cover Open" settings.

   8. In case of copy printing, check "Collate".
      When unchecked the box of "Collate", printing may not be worked properly
      depending on the used application.
      Also, when "Collate" is selected in using the application and its
      application produces the print job by copy units, the setting of "Cut of
      Print End" may be invalid.

   9. Print start position becomes the top margin value set by the application
      plus the top margin value needed by Printer Driver. Confirm the print
      start position before printing. 

  10. This Printer Driver does not support Two Color printing.

  11. This Printer Driver does not support "Printer Font Selection".
      Select the TrueType font in Windows, and print.

  12. In case of Serial Interface using, set "Port Settings" by clicking
      "Details" of Printer Property. If the condition is 
      wrong, the desired printing results cannot be obtained.

  13. When recovering from Stand-by mode, Windows may sometimes stop replying,
      and may not be able to print. In this case, using the Service Pack
      (the latest version) provided by Microsoft is recommended.



***** About the trademark **********
    The names of the companies and products are the registered trademarks or
    trademarks of different companies.

