This README.TXT explains the installation of the
Fujitsu PrintPartner printer driver for use
with Windows NT v3.51.


Installing the Printer Driver
---------------------------------
1.  From the Main group, choose the Control Panel
    icon.

2.  In Control Panel, choose the Print Manager
    icon (labeled "Printers"). The Print Manager
    opens. From the Printer menu option, choose
    "Create Printer...".

3.  The "Create Printer" dialog box appears. 
    Expand the "Driver:" drop-down list by
    clicking on its down arrow. Scroll to the
    bottom of the list and select "Other...". 

4.  The "Install Driver" dialog will appear.
    Insert the PrintPartner printer driver
    installation disk into drive A, enter "A:\ENGLISH"
    and choose the OK button.

5.  A "Select Driver" dialog box appears.

6.  In the "Printer Driver:" list, select the
    printer model you wish to install and choose
    the OK button.

7.  Windows NT copies the necessary file(s) and
    returns you to the "Create Printer" dialog
    box.

8.  Fill in the rest of the information fields
    and choose OK.

9.  For instructions on how to configure your
    printer, see the section for the Print
    Manager in the "Microsoft Windows NT System
    Guide."



<Points to Note>

(1) The PrintPartner printers' serial ports
    only support baud rates of 1200, 2400, 4800, 9600, 19200,
    38400 and 57600. Other baud rates should not be selected
    in the driver when using the serial port.

(2) When the MFF is being used, please make sure that it
    contains the correct paper size.

(3) When using Duplex printing :  (PrintPartner 14ADV,16ADV)
      When the front page and back page settings, such as paper source,
      paper size or print direction, are the same, the printer will print
      according to example #1.
      When any of these settings are different the printer will print
      according to example #2.

      Example #1 :
        Application     Printer
        ---------------------------------
        Page 1->A4      Page 1 front ->A4
        Page 2->A4      Page 1 back  ->A4
        Page 3->A5      Page 2 front ->A5
        Page 4->A5      Page 2 back  ->A5

      Example #2 :
        Application     Printer
        ---------------------------------
        Page 1->A4      Page 1 front ->A4
        Page 2->A5      Page 2 front ->A5
        Page 3->A5      Page 2 back  ->A5
        Page 4->A5      Page 3 front ->A5

(4)[Media Type] allows you to make detail settings about Paper Source.
    1) Auto (All Select)    : All paper sources are selected.
    2) Auto (Tray1 not used): All but tray 1 are selected.
    3) Auto (Tray2 not used): All but tray 2 are selected.
    4) Auto (MFF not used)  : All but MFF are selected.
    5) No Auto Feed         : When "Auto" is not selected in the
                              [Paper Source],"No Auto Feed" should
                              be selected for [Media Type].
                              The only paper souce which is selected
                              in the [Paper Source] is available.


Microsoft and Windows NT are registered trademarks of Microsoft Corporation.
