         --------------------------------------------------------
                  TWAIN Data source Software
                        < 32-bit version >
                           README File
                           Aug 08, 2005
                           Version 6.6.10 (a)
         --------------------------------------------------------

             (C) Copyright  PFU Ltd. 1994-2005


Please read this file before using this product.  The file includes 
important notes and also the latest additional information not included
in the on-line help.

------------------------------------------------------------------------
Table of Contents 
------------------------------------------------------------------------

1. When using the Adaptec-made SCCI adapter in IBM PC/AT Compatible machine
2. Notes on Two or more scanner devices at same PC.
3. Notes on duplex-scanning feature
4. Notes on scanning-area specification 
5. Notes on document-jam 
6. Notes on system font
7. Notes on coexistence with 16-bit version
8. Notes on SCSI BIOS setting

-------------------------------------------------------------
1. When using the Adaptec-made SCCI adapter in IBM PC/AT Compatible machine
-------------------------------------------------------------

The TWAIN data source supports the below Adaptec-made SCSI Kits 
in the IBM PC/AT Compatible machine. 

 - SCSI Card 19160 (ASC-19160 for PCI bus)
 - SCSI Card 2910C (AHA-2910C for PCI bus)
 - SCSI Card 2940AU (AHA-2940AU for PCI bus)
 - PCI Ultra SCSI Master Kit (AHA-2940U for PCI bus)
 - SlimSCSI 1460 (APA-1460A/AHA-1460B for PCMCIA bus)

Basically, other SCSI boards works if it supports your using Operating 
System. However, Fujitsu verified the operation with only the above SCSI 
boards.

Thus, please note, scanning may not be performed in normal when 
using SCSI boards that are not compatible with above.

Fujitsu have confirmed incompatibility with the following SCSI card:
 - Adaptec brand  AHA-2920

---------------------------------------------------
2. Notes on Two or more scanner devices at same PC.
---------------------------------------------------

On Windows2000, this software does not support multi-device.
If two or more devices are connected to one PC, use version 5.6 of 
this software which using ASPI interface.

---------------------------------------------------
3. Notes on duplex-scanning feature
---------------------------------------------------

To use the duplex scanning feature in this software, the application you use
must support the continuous-scanning feature of image data.

Thus, duplex-image data may not be scanned depending on the application, 
even though the duplex-scanning is specified. 

---------------------------------------------------
4. Notes on scanning-area specification
---------------------------------------------------

Scanning-area can be specified using the 3-type units such as
 millimeter(mm), 
inch, and pixel. However, please note, the scanning area may have an error
 of 
max.32-pixel per one line in each unit. 
   

---------------------------------------------------
5. Notes on paper-jam 
---------------------------------------------------

When paper-jam occurs, the error message: "Paper Jam" is displayed.
 
After the jammed documents was pulled out and the OK button on the 
error-message dialogue was pressed, the software becomes input-ready
condition, and scanning is ready to be started. 

However, regarding the simplex scanning (duplex-scanning is not specified), 
in the case that paper-jam occurs while the top of the document is being 
scanned, one extra document may be ejected out of the documents on the tray 
when pressing the OK button in the error-message dialogue.
In this case, return the ejected document back to the tray and start to scan 
again.

---------------------------------------------------
6. Notes on System font
---------------------------------------------------

Some string on dialog box of this software is cut off, if the system-font is 
changed to LARGE or greater. It is depending on a using OS and graphic 
accelerator and diskplay drivers.
depending on graphic accelerator and display driver that you use.  
In this case, select smaller system-font for the normal display.   

---------------------------------------------------
7.  Notes on coexistence with 16-bit version
---------------------------------------------------

This software is designed to operate on 32-bit mode.  Therefore, 
when you use an application for 16-bit, please be sure to use 
the software of "2.x" version or before. 

Also, when installing this software, please be sure to check 
the TWAIN data source for 16-bit is not installed.  When the TWAIN data
sources for 32-bit version and 16-bit version coexist, this software 
may not operate normally depending on the environment you use. 

---------------------------------------------------
8.  Notes on SCSI BIOS setting
---------------------------------------------------

Also, when using the software, the setting for DISCONNECT on SCSI board 
must be valid  

When using the SCSI boards described in the above "1",  the changing is not 
required because the standard setting value is already set to "DISCONNECT
Enable".  
  
For the detailed setting-procedures, please refer to the instruction manual 
attached to the SCSI board that you use.   


------------------------------------------------------------------------

MS-DOS and Windows are registered trademarks of Microsoft for USA and 
other countries.
Other company name and product name are trademarks or registered trademarks
of individual companies.


----------------------------------------------------------------
