   ************************************************************************
   **                                                                    **
   **                   Device Driver for Windows NT                     **
   **                             Version 2.05                           **
   **                                                                    **
   **                       For PC/AT compatible                         **
   **                                                                    **
   **                                       Revised: November 04, 1997   **
   ************************************************************************
   All Rights Reserved, Copyright (C) FUJITSU LIMITED 1996,1997


Thank you for using Fujitsu's MO Device Driver Package.
This package works under the following conditions;

OS:
- Windows NT Workstation Version 4.0(US, PC/AT compatible)
- Windows NT Workstation Version 3.51(US, PC/AT compatible)

MO DRIVE:
- FUJITSU M2541(128MB disk, 230MB disk)
  Please read NOTES, before Device Driver installation.



============================
Please assign a drive letter
============================
It is necessary to assign a drive letter for the MO drive which is
controlled by Fujitsu device driver. If no drive letter is assigned
for the drive, the drive cannot be used, which means that the drive
seems disappeared from Explorer or Disk Administrator*.
To assign the drive letter, follow one of the two ways as described
below.
(1) Assign drive letters using installer when installing device driver.
    (Refer to manualus.txt section 2.1 (6) to (9).)
(2) Assign drive letters using Fujitsu MO Formatter after installation.
    (Refer to manualus.txt section 4.6.)

*After installing Fujitsu device driver, Fujtsu MO Formatter manages
MO drives instead of Disk Administrator.



========
Notes
========
General
1. Do not close "Moformatter" while formatting an MO disk.

2. Do not attempt to access one of your MO disk by another application 
   (such as Explorer) while using Moformatter.

3. Moformatter indicates unformatted capacity of the disk which is different
   from formatted capacity.

4. NT3.5x & NT4.0 do not recognize NTFS formatted disk as removable disk.
   "FAT" disks are recommended disks for use as removable storage disk. For 
   further information on NTFS and FAT formatted disks, refer to your 
   Windows NT3.5x & Windows NT4.0 manuals.

5. If you can not access your FAT formatted MO disk, try it a second time 
   and if you still can not access your MO disk, access your floppy disk 
   drive, usually A: with or without a disk inserted. then access your MO 
   disk.

   The failure of your system to recognize a FAT formatted MO disk is an NT 
   delay in loading the FAT driver. Accessing your A: drive, or trying 
   second time to access your MO disk, keys your system to load the FAT 
   driver. Interrogating the drive's "properties" will indicate the drive's 
   "File system" format.

Windows NT4.0
1. Close all applications you are using with an MO disk before you eject it. 
   Failure to do so could result in a loss of data.

2. If running NT4.0 on the Fujitsu M2541 you will need to use software eject 
   tool to eject an MO disk(the eject button is disabled under NT4.0).
   To eject the disk with the Fujitsu M2541B:
   1. Double click on your "MyComputer" icon. You will see an icon for each of 
      drives.
   2. Select your removable disk icon. Click with your RIGHT mouse button 
      on the icon. A menu will appear.
   3. Select "Eject".

