   ************************************************************************
   **                                                                    **
   **             Supplemental Device Driver for M2513A                  **
   **                           Version 1.02                             **
   **                                                                    **
   **                         For Windows 95                             **
   **                     For PC/AT compatible                           **
   **                                                                    **
   **                                          Revised:February 03, 1997 **
   ************************************************************************
   All Rights Reserved, Copyright (C) FUJITSU LIMITED 1996,1997


Thank you for using Fujitsu's M2513A magneto-optical (MO) disk drive. 
Using this device driver you can use M2513A in Windows 95 environment.

============
1. Overview
============
The device driver, FJSCSI2K.VXD, controls Magnet-Optical disk drive with 
SCSI interface, M2513A.
(M2513A is the model name of FUJITSU's MO drive with SCSI interface.)

The device driver, FJSCSI2K.VXD, provides you the following  additional 
functions over Windows 95 internal disk driver in using M2513A:

Windows 95 supports 2048 bytes/sector devices.  However, when the disk is 
changed from 512 bytes/sector to 2048 bytes/sector, the system will hang up.
This could occur on the M2513A. The auxiliary device driver prevents 
this problem.


Notes:
1. The system could hang up when FDISK.EXE, is used for a 640-megabyte
   disk.Use the attached MO disk formatter instead.

2. The system could hang up if "Copy Disk", which appears if the drive icon 
   is clicked on with the right mouse button, is started.
   This problem has nothing to do with the device driver.

3. The message "The device is not ready" could appear when the 2048byte/sector 
   disk is inserted and accessed. If the message appears, press "Retry" button.
   The disk can be used without any trouble.


===============
2. Installation
===============
The following description assumes that the setup.exe is in floppy 
disk drive A:.

   (1) Click the START button.
   (2) Select "Run..."
   (3) Type "A:\Win\setup.exe", and click "OK".

Then follow the instruction shown by the Installer.

The installer copies "FJSCSI2K.VXD" to C:\Windows\System\Iosubsys.


==================
3. Uninstallation
==================
When the device driver FJSCSI2K.VXD becomes unnecessary, uninstall 
the device driver. The followings are the uninstallation procedure:

   (1) Select "Fujitsu DynaMO640" in the list box.
   (2) Double-click "Uninstall".


=============
4. Trademarks:
=============
Windows is a registered trademark of Microsoft Corporation.
IBM, PC/AT are either registered trademark or trademark of 
International Business Machines Corporation.
Other company names and product names are registered trademarks 
or trademarks of their respective companies.
