incremental SDK 1.6.3 Patch Level 4 => 1.6.7.b3
===============================================

Changes:
--------

- PONRTSYS-7133: Update the MIB initialization file (16 T-CONTs, 16 Schedulers, 128 Queues)
  (MIB files)
- PONRTSYS-7130: Do not show disabled GEM ports
  (PON Tools)
- PONRTSYS-7102: qos_mgr: reset port data on db delete
  (PPA drv)
- PONRTSYS-7009: Add debug functions fapi_pon_debug_alloc_assign/_deassign for XGS-PON
  (PON Lib)
- PONRTSYS-6996: Move allocation and GEM counters initializer to PON Ethernet driver
  (PON MBox drv)
- PONRTSYS-6995: Move GEM creation/deletion to ETH driver
  (PON MBox drv, PON Net Lib, PON Adapter)
- PONRTSYS-6993: Extend IP link command for GEM interface creation
  (OpenWRT Core patch)
- PONRTSYS-6977: Implement WAN SerDes bit error counter application
  (PON Mbox drv, PON Lib)
- PONRTSYS-6933: Retry PON FW download in case it failed
  (PON MBox drv)
- PONRTSYS-6445: integrate fw message interface version 3.14
  (pon-firmware-3.14.0.3.0.tar.gz, pon-firmware-3.14.1.3.0.tar.gz)
  (PON Lib, PON Mbox drv)
- PONRTSYS-6135: Disable PPv4 QoS default debug prints
  (Linux patch)
- PONRTSYS-5568: prbs test pattern generator and checker on pon wan side
  (PON Lib)
- PONRTSYS-5439: disable learning on dev register
  (PON Mbox drv)
- PONRTSYS-5439: keep learning off on flow delete
  (PON Net Lib)
- DRV_DPM_SW-210: FLM PTP timestamping (1-Step PTP over IPv4 + UDP) debug support
  (Linux patch)

-----

Patch changes:

- ./dl/pon-firmware-3.13.0.3.17.tar.gz
- ./dl/pon-firmware-3.13.1.3.17.tar.gz

+ ./dl/pon-firmware-131.14.0.3.245.tar.gz
+ ./dl/pon-firmware-131.14.1.3.245.tar.gz
+ ./feeds/ugw/net/ppa/ppa-drv/patches/005-PONRTSYS-7102.patch 
+ ./feeds/ugw/pon/pon-adapter/patches/001-PONRTSYS-6995.patch 
+ ./feeds/ugw/pon/pon-lib/patches/007-PONRTSYS-7009.patch
+ ./feeds/ugw/pon/pon-lib/patches/008-PONRTSYS-6977.patch
+ ./feeds/ugw/pon/pon-lib/patches/009-PONRTSYS-5568.patch
+ ./feeds/ugw/pon/pon-lib/patches/010-PONRTSYS-6445.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/005-PONRTSYS-6933.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/006-PONRTSYS-5439.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/007-PONRTSYS-6977.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/008-PONRTSYS-6327.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/009-PONRTSYS-6445.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/010-PONRTSYS-6995.patch
+ ./feeds/ugw/pon/pon-mbox-drv/patches/011-PONRTSYS-6996.patch
+ ./feeds/ugw/pon/pon-net-lib/patches/006-PONRTSYS-5439.patch
+ ./feeds/ugw/pon/pon-net-lib/patches/007-PONRTSYS-6995.patch
+ ./feeds/ugw/pon/pon-tools/patches/001-PONRTSYS-7130.patch
+ ./patches/core/package/iproute2-extend-gem-attribute-list.patch
+ ./patches/core/package/libnl-extend-gem-attribute-list.patch
+ ./source/linux_patches/1014-PONRTSYS-6135-Disable-PPv4-QoS-default-debug-prints.patch
+ ./source/linux_patches/1013-DRV_DPM_SW-210-BugFix-for-1-Step-PTP-over-UDP.patch 

* ./feeds/ugw/pon/gpon-omci-onu/files/mibs/ponip/prx300_1V.ini
* ./feeds/ugw/pon/gpon-omci-onu/files/mibs/ponip/prx300_2U.ini
* ./feeds/ugw/pon/gpon-omci-onu/files/mibs/ponip/prx300_1U.ini
* ./feeds/ugw/pon/pon-base-files/config/Config.in
* ./feeds/ugw/pon/pon-gpon-firmware-b/Makefile
* ./feeds/ugw/pon/pon-xpon-firmware-b/Makefile
* ./patches/core/package/libnl-pon-netdev-qdisc-flower.patch
* ./patches/core/series
* ./source/linux_patches/series

-----

format: 1.6.6.b3rX
X = incremented "release candidate"
last SDK was 1.6.3
so this patch "4" is 1.6.7, next official patch would be 1.6.8
to differ between SDK and patch the base is mentioned for patches only: 1.6.7.b3 (-> 4th patch on (1.6.)3 base)
(theoretically to differ between 1.6.7.b0 = PL7@1.6.0 and 1.6.7.b3 = PL4@1.6.3)

incremental Patch Level means, you need the base SDK and all former Patch Levels to apply on
SDK 1.6.3 + PL 1.6.4.b3 + PL 1.6.5.b3 + PL 1.6.6.b3 + PL 1.6.7.b3