11.4.2 Short-circuit the laser diode
TOP PREVIOUS NEXT
Solder the land in the flexible cable of the optical pickup.
Notes
Be sure to do this befer disconnecting the flexible cable of the optical pickup from the module C.B.A.
Use an anti-static soldering iron to short-circuit and unshort-circuit laser diode./(Recommended soldering iron: Hakko with ESD countermeasure)
After you have finished repairing the laser diode, follow the correct procedure to remove the solder from the short-circuit location. (Refer to section 11, Assembling and Disassembling the Optical Pickup (Mechanical Parts).)
@