
# Copyright (c) 2000-2008 Synology Inc. All rights reserved.

[action_rule]
access_controller	=	"Access controller"
access_denied	=	"Access denied"
access_granted	=	"Access granted"
act_cant_execute	=	"This action cannot be executed with event [{0}] on the same device. Please choose another event or device."
act_result_ignored	=	"Ignored"
act_result_interrupted	=	"Interrupted"
action_device	=	"Action device"
action_result	=	"Action Result"
action_rule	=	"Action Rule"
action_type	=	"Action type"
action_type_hint	=	"Choose whether this action can be interrupted by another action."
add_rule	=	"Add Action Rule Wizard"
allow_act	=	"Active"
available_time	=	"Active"
cam_act_disable	=	"Disable Camera"
cam_act_enable	=	"Enable Camera"
cam_evt_disabled	=	"Camera Disabled"
cam_evt_enabled	=	"Camera Enabled"
cannot_enable_rule_with_disable_devcie	=	"At least one of the selected rule(s) cannot be enabled, because its associated device is disabled. Please enable the associated device(s) and try again."
casing_open	=	"Device case open"
desc_act_cam_audio_out	=	"Play audio pattern {5} from camera {0} on server {1} {2} times every {3} {4}."
desc_act_cam_audio_out_sche	=	"Play audio pattern {5} from camera {0} on server {1} every {3} {4}."
desc_act_cam_auto_pan	=	"Instruct camera {0} on server {1} to auto pan for {3} {4} and move to return position {6}."
desc_act_cam_auto_pan_sche	=	"Instruct camera {0} on server {1} to auto pan for scheduled duration and move to return position {6} at end of schedule."
desc_act_cam_digital_out_sche	=	"Activate digital output {5} of camera {0} on server {1}."
desc_act_cam_digital_output	=	"Activate digital output {5} of camera {0} on server {1} for {3} {4}."
desc_act_cam_disabled	=	"Disable camera {0} on server {1}."
desc_act_cam_disabled_sche	=	"Disable camera {0} on server {1}."
desc_act_cam_enable	=	"Enable camera {0} on server {1}."
desc_act_cam_enable_sche	=	"Enable camera {0} on server {1}."
desc_act_cam_object_tracking	=	"Activate auto tracking for camera {0} on server {1} for {3} {4} and move to return position {6}."
desc_act_cam_object_tracking_sche	=	"Instruct camera {0} on server {1} to auto track objects for scheduled duration and move to return position {6} at end of schedule."
desc_act_cam_patrol	=	"Instruct camera {0} on server {1} to patrol along {5} and return to position {6} {2} times every {3} {4}."
desc_act_cam_patrol_sche	=	"Instruct camera {0} on server {1} to patrol along {5} and return to position {6} every {3} {4} until end of schedule."
desc_act_cam_preset	=	"Instruct camera {0} on server {1} to move to preset position {5}, hold for {3} {4}, and move to return position {6}."
desc_act_cam_preset_sche	=	"Instruct camera {0} on server {1} to move to preset position {5}, hold for scheduled duration, and move to return position {6} at end of schedule."
desc_act_cam_record	=	"Record video from camera {0} on server {1} for {3} {4}."
desc_act_cam_snapshot	=	"Take snapshot of camera {0} on server {1} {2} times every {3} {4}."
desc_act_cam_snapshot_sche	=	"Take snapshot of camera {0} on server {1} every {3} {4}."
desc_act_vs_audio_out	=	"Play audio pattern [{5}] from VisualStation {2} times every {3} {4}."
desc_act_vs_audio_out_sche	=	"Play audio pattern [{5}] from VisualStation every {3} {4}."
desc_act_web_client_audio_out	=	"Play audio pattern {5} from Surveillance Web Client {2} times every {3} {4}."
desc_act_web_client_audio_out_sche	=	"Play audio pattern {5} from Surveillance Web Client every {3} {4}."
desc_event_cam_alarm	=	"The alarm {2} for camera {0} on server {1} was triggered."
desc_event_cam_disabled	=	"Camera {0} on server {1} was disabled."
desc_event_cam_enabled	=	"Camera {0} on server {1} was enabled."
desc_event_cam_lost	=	"Connection to camera {0} on server {1} was lost."
desc_event_cam_md	=	"Motion detected for camera {0} on server {1}."
desc_event_cam_resumed	=	"Connection to camera {0} on server {1} was resumed."
desc_event_external	=	"External event {0} on server {1} was detected."
desc_evt_cam_audio	=	"Audio detected for camera {0} on server {1}."
desc_evt_cam_tampering	=	"Tampering detected for camera {0} on server {1}."
desc_evt_controller_alarm	=	"The alarm of access controller {0} on server {1} was triggered."
desc_evt_controller_casing_open	=	"The case of access controller {0} on server {1} was opened."
desc_evt_door_access_deny	=	"Access to door {0} on server {1} denied."
desc_evt_door_access_grant	=	"Access to door {0} on server {1} granted."
desc_evt_door_alarm	=	"The alarm of door {0} on server {1} was triggered."
desc_evt_door_tampering	=	"Tampering detected for door {0} on server {1}."
desc_evt_idpoint_tampering	=	"Tampering detected for card reader/REX of door {0} on server {1}."
desc_ext_action	=	"Execute URL command every {0} {1}."
desc_ext_action_triggered	=	"Execute URL command {2} times every {0} {1}."
edit_rule	=	"Edit Action Rule"
event_min_interval	=	"Minimum time between events (seconds)"
event_source	=	"Event source"
forever	=	"forever"
history_clear_warning	=	"Are you sure you want to delete all history logs?"
interrupted	=	"Interruptible"
minute	=	"Minute(s)"
move_preset	=	"Move to preset"
no_action_rules	=	"Please {0}add{1} action rules."
no_available_patrol	=	"No patrol paths available"
no_available_preset	=	"No presets available"
no_available_schedule	=	"Scheduling conflicts exist for the selected action or device. Please select another action or device."
no_avaliable_device	=	"No avaliable device"
no_history	=	"No records found. Please go to the {0}List{1} page to check your settings."
non_interrupted	=	"Uninterruptible"
remind_disable_reason	=	"Disabled cells are currently used by other rules for this device."
return_position	=	"Return position"
rule_del_warning	=	"Are you sure you want to delete the selected action rule(s)?"
rule_history	=	"History"
rule_history_export_title	=	"Surveillance Station Action Rule History"
rule_info	=	"Information"
rule_name	=	"Name"
rule_type	=	"Rule type"
rule_type_capitalization	=	"Rule Type"
rule_type_hint	=	"Triggered: Actions are triggered by events.<p>Scheduled: Actions are executed by schedule. In addition, each action of every device can only have one schedule."
same_rule_exist	=	"An action rule using the same event and action already exists. Please modify this action rule and try again."
scheduled	=	"Scheduled"
scheduled_no_event	=	"Scheduled rules cannot be linked to events."
second	=	"Second(s)"
start_recording	=	"Start recording"
status_invalid	=	"Invalid"
times	=	"Times"
triggered	=	"Triggered"
url	=	"Url"
url_hint	=	"Enter the URL and login information of another device. This device will be activated when an event is triggered.<p>e.g., http://DeviceIP:PORT/CGI_PATH?action=list"
web_client	=	"Surveillance Web Client"
when	=	"when"

[addons]
addons_disabled	=	"disabled"
addons_enabled	=	"enabled"
addons_restored	=	"restored to default"
auto_update	=	"Auto-update"
desc_access_controller	=	"Axis Door Controller is designed to support Axis A1001. With the integration of Axis Door Controller, you can configure two doors and have them paired with two IP cameras for better monitoring. By operating Surveillance Station, the access management becomes way easier. You can also playback every event related to the access information. Axis Door Controller makes Surveillance Station a more complete solution with a step further to access management."
desc_cms	=	"Synology Central Management System (CMS) is designed for multi-site and multi-server surveillance deployments. CMS provides surveillance personnel with an effective solution to monitor and manage surveillance deployment of all scales. The hierarchy consists of a host server which has total control over all other recording servers across different locations. IT administrators can enjoy the following benefits from CMS deployment: efficient management, flexible deployment, and proactive control. Enable Surveillance CMS here to enjoy the easiness of surveillance server management."
desc_joystick	=	"Joystick support in Surveillance Station facilitates the PTZ operations without the mouse clicking. Simply use joystick to operate pan, tilt and zoom on Live View. There are a few hotkeys that you can configure the most common functions without any hassle. The joystick, supported by Surveillance Station, can become a total replacement of mouse, and obviate the need for mouse being connected to your computer at the same time."
desc_vs	=	"Synology VisualStation is a device dedicated to surveillance. It provides a cost-effective monitoring solution and flexibility to your business. With its energy-efficient but powerful features, you can watch live feeds and recorded events managed by Surveillance Station, as well as perform PTZ actions. For environments requiring just a monitoring station but not a complicated network setup or a pricy dedicated computer, VisualStation is the ideal choice."
installed	=	"Installed"
joystick	=	"Joystick"
manual_install	=	"Manual Install"
rec_server_reload_alarm	=	"CMS host has sent a request of reloading the page."
restore_defaults	=	"Restore Defaults"
synology	=	"Synology Inc."
update	=	"Update"

[audio_output]
audio_output	=	"Audio Output"
audio_output_gain	=	"Gain"
audio_output_note	=	"Click on the microphone button to start audio output."
bi_direction_audio	=	"Two-way Audio"
check_mic_plug_correct	=	"Please check that your microphone is plugged in correctly."
exceed_max_win	=	"Simultaneous audio output is limited to five channels."
microphone	=	"Microphone"
mute	=	"Mute"
occupied	=	"The camera audio output function is in used, please try again later."
play	=	"Play"
playing	=	"Playing"
repeat	=	"Repeat"
start_talking	=	"Click here to start 2-way audio."
stop_talking	=	"Click here to stop 2-way audio."
talk	=	"Talk"
talking	=	"Talking"

[audio_pattern]
add_audio_pattern	=	"Add Audio Pattern"
audio_pattern	=	"Audio Pattern"
del_pattern_warning	=	"Are you sure you want to delete the selected pattern(s)?"
duration	=	"Duration"
edit_audio_pattern	=	"Edit Audio Pattern"
invalid_file	=	"This audio file format is not supported. Please select another audio file and try again."
original_pattern	=	"Original pattern"
pattern_alarm	=	"Alarm"
pattern_beep	=	"Beep"
pattern_bell	=	"Bell"
pattern_clock_beep	=	"Beep 2"
pattern_danger	=	"Warning"
pattern_dog_bark	=	"Dog bark"
pattern_emergency	=	"Man saying emergency"
pattern_hello	=	"Man saying hello"
pattern_siren	=	"Siren"
pattern_stop	=	"Man saying stop"
please_check_input_source	=	"Please check your audio source connection and settings."
record_from_mic	=	"Record from microphone"
sound_source	=	"Audio source"
start_recording	=	"Start recording"
stop_recording	=	"Stop recording"
sys_def_pattern	=	"System default pattern"
upload_file	=	"Upload audio file"

[axis_access_controller]
access_control	=	"Access Control"
access_control_duress	=	"Access Control Duress"
access_control_log_download_title	=	"Surveillance Station Access Control Log"
access_controller	=	"Access Controllers"
access_denied	=	"Access Denied"
access_granted	=	"Access Granted"
access_not_taken	=	"Access Not Taken"
access_taken	=	"Access Taken"
acknowledge	=	"Acknowledge"
acknowledge_all	=	"Acknowledge all items"
acknowledge_category	=	"Acknowledge all items in this category"
acknowledge_filtered	=	"Acknowledge all filtered items"
acknowledge_filtered_category	=	"Acknowledge all filtered items in this category"
acspoint	=	"Access Point"
acspoint_disable	=	"Access Point Disabled"
acspoint_enable	=	"Access Point Enabled"
action_failed	=	"Action Failed"
add_controller	=	"Add Controller Wizard"
addition_schedule	=	"Addition Schedule"
alarm	=	"Alarm"
all_controllers	=	"All Controllers"
all_door	=	"All doors"
all_log	=	"All Logs"
all_source	=	"All sources"
anonymous	=	"Anonymous"
axis_access_controller	=	"Axis Door Controller"
block	=	"Blocked"
block_cardholder_tips	=	"Are you sure you want to block the selected user(s)?"
card_holder	=	"Cardholders"
card_holder_info	=	"Cardholder Information"
card_num	=	"Card number"
card_raw	=	"Card raw"
click_to_set_video_source	=	"Click <a {0}>here</a> to set video source"
config_acspoint_delete	=	"Access Point Deleted"
config_acspoint_modify	=	"Access Point Changed"
config_area_delete	=	"Area Removed"
config_area_modify	=	"Area Changed"
config_change	=	"Configuration Change"
config_door_delete	=	"Door Deleted"
config_door_modify	=	"Door Changed"
config_idpoint_delete	=	"Identification Point Deleted"
config_idpoint_modify	=	"Identification Point Changed"
conn_err_msg	=	"Failed to connect to the access controller. Please make sure the following controller settings are correct: IP address, hostname, and port number."
controller_del_warning	=	"Are you sure you want to delete the selected controller(s)?"
controller_need_retrieve	=	"Need to retrieve"
controller_retrieving	=	"Retrieving"
controller_search_fail_msg	=	"Access controller search failed. Please check your network settings or try again later."
controller_search_title	=	"Access Controller Search Results"
controller_settings	=	"Controller Settings"
device_casing_close	=	"Device Case Closed"
device_casing_open	=	"Device Case Opened"
digital_input	=	"Digital Input"
digital_input_activate	=	"Digital Input Activated"
digital_input_normal	=	"Digital Input Normal"
disconnect	=	"Disconnected"
door	=	"Door"
door_accessed	=	"Accessed"
door_alarm	=	"Door Alarm"
door_count	=	"Door number: {0}"
door_double_locked	=	"Double Locked"
door_fault	=	"Fault"
door_forced_open	=	"Forced Open"
door_locked	=	"Locked"
door_locked_down	=	"Locked Down"
door_locked_open	=	"Locked Open"
door_long_open_warning	=	"Door Open Too Long Warning"
door_mode	=	"Door Mode"
door_open_too_long	=	"Open Too Long"
door_physical_close	=	"Door Closed"
door_physical_open	=	"Door Open"
door_physical_state	=	"Door Physical State"
door_section	=	"Door {0}"
door_tamper	=	"Door Tampering"
door_tamper_detected	=	"Door Tampering Detected"
door_unlocked	=	"Unlocked"
door_warning	=	"Door Warning"
duplicate_card_info	=	"The cardholder information you entered is already saved to another cardholder. Please check the information you entered is correct and try again."
edit_card_holder	=	"Edit Cardholder"
edit_controller	=	"Edit Controller"
entrance	=	"Enter"
event_buffer_begin	=	"Event Buffer Begin"
event_logger	=	"Logger"
event_logger_alarm	=	"Event Alarm Logger"
event_regist_changed	=	"Event Registrations Changed"
event_schedule	=	"Event Schedule"
exit	=	"Exit"
failed_to_load_info	=	"Failed to load access controller information."
hardware_auto_retrieve	=	"Automatically Retrieve Hardware Configuration From Controller"
idpoint	=	"Identification Point"
idpoint_activate	=	"Identification Point Activated"
idpoint_request_card	=	"Identification Point Request Card"
idpoint_request_pin	=	"Identification Point Request PIN"
idpoint_request_rex	=	"Identification Point Request REX"
idpoint_tamper	=	"Identification Point Tamper"
idpoint_tamper_activate	=	"Identification Point Tamper Activate"
idpoint_tamper_normal	=	"Identification Point Tamper Normal"
idpoint_timeout	=	"Identification Point Request Timeout"
last_access	=	"Last accessed:"
log_alarm	=	"Log Alarm"
log_event	=	"Log Event"
logcenter	=	"Log Center"
logger_dropped_alarm	=	"Logger Dropped {0} Alarms"
logger_dropped_alarm_filter	=	"Dropped Alarms"
logger_dropped_event	=	"Logger Dropped {0} Events"
logger_dropped_event_filter	=	"Dropped Events"
manual_access	=	"Manual Access"
manual_lock	=	"Manual Lock"
manual_lock_option	=	"Manual Lock"
manual_unlock	=	"Manual Unlock"
network_lost	=	"Network Connection Lost"
network_restore	=	"Network Normal"
no_controller_found	=	"No access controllers were found."
no_controller_item_tip	=	"Please {0}add{1} a controller."
no_event	=	"No event available"
no_last_card_info	=	"Unable to retrieve last card scan information."
no_video_source	=	"No video source."
normal	=	"Normal"
number_only_tip	=	"Please enter numbers only."
peer_connection	=	"Peer Connection"
peer_connection_established	=	"Peer Connection Established"
peer_connection_lost	=	"Peer Connection Lost"
peer_controller	=	"Peer Controller"
peer_pairing_failed	=	"Peer Connection Pairing Failed"
reader	=	"Reader"
related_cam	=	"Paired camera:"
retrieve	=	"Retrieve"
retrieve_controller_settings	=	"Retrieve Settings from Controller"
retrieve_last_card	=	"Retrieve last card scan"
rex	=	"REX"
schedule_interval	=	"Interval Schedule"
schedule_interval_activate	=	"Interval Schedule Activate"
schedule_interval_normal	=	"Interval Schedule Normal"
schedule_pulse	=	"Pulse Schedule Trigger"
set_relative_video_source	=	"Set a paired camera as a video source"
subtraction_schedule	=	"Subtraction Schedule"
sync_added_cardholder	=	"Synchronize Added Cardholder"
sync_added_door	=	"Synchronize Added Door"
sync_deleted_cardholder	=	"Synchronize Deleted Cardholder"
sync_deleted_door	=	"Synchronize Deleted Door"
system_ready	=	"System Ready"
system_unready	=	"System Not Ready"
tip_card_raw	=	"The raw and unparsed card data in lowercase hexadecimal format."
unknow_controller	=	"Unknown Controller"
unknow_door	=	"Unknown Door"
unknow_schedule	=	"Unknown Schedule"
update_firmware_tip	=	"Please update the controller firmware to version {0} or later."
user_alarm	=	"User Alarm"
user_alarm_interval	=	"User Alarm Interval"
user_alarm_interval_activate	=	"User Alarm Interval Activate"
user_alarm_interval_normal	=	"User Alarm Interval Normal"
user_alarm_pulse	=	"User Alarm Pulse"
valid_from	=	"Valid from:"
valid_until	=	"Valid until:"
validation_failed_credential	=	"You must enter information for at least one of the following fields: PIN, Card number, or Card raw."
validation_failed_user_info	=	"You must enter information for at least one of the following fields: First name or Last name."
virtual_input	=	"Virtual Input"
virtual_input_activate	=	"Virtual Input Activated"
virtual_input_normal	=	"Virtual Input Normal"

[cam_archiving]
alert_archive_version_is_newer	=	"This configuration file was exported by a newer version of Surveillance Station and is not compatible with your version."
alert_dp_version_different	=	"This configuration file was exported by a different version of Device Pack and is not compatible with the destination server."
cam_to_export	=	"Cameras to export"
camera_export	=	"Export"
camera_import	=	"Import"
configuration_archiving	=	"Configuration"
export_complete	=	"Camera configuration is exported."
export_dest	=	"Destination"
export_dest_describe	=	"Select a destination to save the configuration file."
export_fail_folder_deny	=	"You are not authorized to access the shared folder."
export_msg_name_overwrite	=	"The configuration name is already in use. Do you want to overwrite it? "
export_name	=	"Name"
export_name_describe	=	"Name your configuration."
export_wizard_camera	=	"Select cameras to export configurations"
export_wizard_name	=	"Create camera configuration"
import_complete	=	"Camera configuration is imported."
import_fail_folder_deny	=	"You are not authorized to access the shared folder."
import_msg_no_select	=	"Please select at least one camera to import."
import_name	=	"Name"
import_no_archive	=	"No configuration file is found in the shared folder."
import_select_archive	=	"Please select a configuration file to import."
import_src	=	"Source"
import_src_describe	=	"Select a source from the drop-down menu, and then select the configuration file to import."
import_wizard_camera	=	"Select cameras to import configurations"
import_wizard_title	=	"Import camera configuration"
wizard_export	=	"Configuration Export Wizard"
wizard_import	=	"Configuration Import Wizard"

[camera]
abbre_camera_continuous_recording	=	"Continuous"
abbre_camera_digital_input	=	"Digital Input"
abbre_camera_edge_recording	=	"Edge Storage"
abbre_camera_external_recording	=	"External"
abbre_camera_io_recording	=	"Alarm"
abbre_camera_manual_recording	=	"Manual"
abbre_camera_motion_and_io_recording	=	"Motion Detection and Alarm"
abbre_camera_motion_recording	=	"Motion Detection"
add_camera	=	"Add Camera"
add_patrol	=	"Add patrol path"
add_preset	=	"Add preset position"
advanced_settings	=	"Advanced Settings"
alert_bitrate_change	=	"Some camera settings might be modified when the bitrate is changed."
alert_bitrate_control_change	=	"Some camera settings might be modified when the bitrate control is changed."
alert_bitrate_range	=	"Please enter a bitrate value between {0} and {1} (Kbps)."
alert_camera_setting_error	=	"Surveillance Station encountered a camera settings error. The selected camera's settings were reset to default."
alert_channel_change	=	"Some camera settings may change when switching channels. Are you sure you want to continue?"
alert_fov_change	=	"Some camera settings might be reset to default when the field of view is changed."
alert_fps_change	=	"Some camera settings might be modified when the frame rate is changed."
alert_gain_range	=	"Please enter a value between {0} and {1} (dB)."
alert_mnttype_change	=	"Some camera settings might be modified when the mount type is changed."
alert_model_change	=	"Changing the model might modify some camera settings."
alert_need_add_license	=	"No license available for adding cameras. Please install another camera license."
alert_no_camera	=	"No IP camera is installed."
alert_no_enable_camera	=	"No IP camera is enabled."
alert_quality_change	=	"Some camera settings might be modified when the image quality is changed."
alert_reach_enabled_max	=	"You are not allowed to manage more than {0} cameras on this {1}."
alert_reach_platform_max	=	"The maximum number of installed cameras has been reached."
alert_resolution_change	=	"Some camera settings might be modified when the resolution is changed."
alert_ruled_fps_change	=	"Some stream settings might be overwrite by this stream when the frame rate is changed."
alert_ruled_resolution_change	=	"Some stream settings might be overwrite by this stream when the resolution is changed."
alert_stream_no_change	=	"Some camera settings might be modified when the stream is changed."
alert_tv_standard_change	=	"Some camera settings might be modified when the TV standard is changed. "
alert_video_change	=	"Some of camera's settings would be changed once the video format is changed."
all_alarms	=	"All Alarms"
all_detections	=	"All Detections"
all_modes	=	"All Modes"
allocation_hint	=	"To achieve better performance, we recommend sharing the same stream across different tasks."
analytics_type	=	"Live View analytics"
apply_camera_confirm	=	"This action will update camera settings. Are you sure you want to continue?"
audio_disable	=	"Disable"
audio_output	=	"Audio Output"
auto_obj_tracking	=	"Auto object tracking"
bitrate	=	"Bitrate"
bitrate_control	=	"Bitrate control"
by_camera	=	"By camera"
by_surveillance_station	=	"By Surveillance Station"
cam_cap_err_host	=	"Failed to connect to the camera. Either the IP address / port number of your IP camera is incorrect, or your camera is not ONVIF compatible."
cam_cap_error	=	"Failed to load camera capabilities values."
cam_cap_load	=	"Successfully loaded camera capabilities values."
cam_cap_newly_load	=	"Different camera detected. Would you like to load camera capability values again?"
cam_cap_unsupport	=	"This camera cannot be supported by PSIA or ONVIF."
cam_param_auto	=	"Auto"
cam_param_bottom	=	"Bottom"
cam_param_bottom_left	=	"Bottom-left"
cam_param_bottom_right	=	"Bottom-right"
cam_param_date	=	"Date"
cam_param_date_time	=	"Date & Time"
cam_param_day	=	"Day"
cam_param_day_night_mode	=	"Day/Night mode"
cam_param_day_time	=	"Schedule (Day)"
cam_param_disable	=	"Disable"
cam_param_enable	=	"Enable"
cam_param_exposure_control	=	"Exposure control"
cam_param_exposure_mode	=	"Exposure Mode"
cam_param_flicker_free_50	=	"Flicker-free 50Hz"
cam_param_flicker_free_60	=	"Flicker-free 60Hz"
cam_param_format	=	"Format"
cam_param_hold_current	=	"Hold current"
cam_param_night	=	"Night"
cam_param_no_artificial_light	=	"No artificial light"
cam_param_osd_overlap	=	"On-Screen Display"
cam_param_outdoor	=	"Outdoor"
cam_param_position	=	"Position"
cam_param_schedule	=	"Schedule"
cam_param_text	=	"Text"
cam_param_time	=	"Time"
cam_param_time_server	=	"Network time server"
cam_param_time_stamp	=	"Timestamp"
cam_param_time_sync	=	"Time Synchronization"
cam_param_top	=	"Top"
cam_param_top_left	=	"Top-left"
cam_param_top_right	=	"Top-right"
cam_param_vdo_flip	=	"Flip"
cam_param_vdo_mirror	=	"Mirror"
cam_param_vdo_orientation	=	"Video Orientation"
cam_param_vdo_rotation	=	"Rotate"
cam_stm_cap_note	=	"Depending on the capabilities of your camera, different options will be available here. Choose the settings that work best with your camera."
camera_actrule_recording	=	"Action Rule Recording"
camera_advanced	=	"Advanced"
camera_advanced_mod	=	"Advanced"
camera_all	=	"All"
camera_analytics_recording	=	"Analytics Recording"
camera_attr_channel	=	"Video channel"
camera_attr_fps	=	"Frame rate (FPS)"
camera_attr_ip	=	"IP address"
camera_attr_mac	=	"MAC address"
camera_attr_model	=	"Camera model"
camera_attr_model_name	=	"Model"
camera_attr_name	=	"Name"
camera_attr_password	=	"Password"
camera_attr_path	=	"Source path"
camera_attr_port	=	"Port"
camera_attr_quality	=	"Image quality"
camera_attr_quality_highest	=	"(Highest)"
camera_attr_quality_lowest	=	"(Lowest)"
camera_attr_resolution	=	"Resolution"
camera_attr_rtsp_port	=	"RTSP port"
camera_attr_streaming_type	=	"Streaming type"
camera_attr_user	=	"Username"
camera_attr_vendor	=	"Brand"
camera_attr_video_type	=	"Video format"
camera_audio	=	"Audio"
camera_audio_format	=	"Audio format"
camera_auto_search_btn	=	"Search Camera"
camera_autosearch_fail_msg	=	"Camera search failed. Please check the network setting, or try again later."
camera_autosearch_stopping	=	"Stopping"
camera_autosearch_title	=	"Camera search result"
camera_cannot_enable	=	"Failed to enable {0}."
camera_continuous_recording	=	"Continuous Recording"
camera_custom_recording	=	"Custom Recording"
camera_default_path	=	"Use default video path"
camera_define_motion_area	=	"Motion Detection Area"
camera_del_deleted_camera	=	"Deleting the selected camera(s) will also delete video recording(s) from the camera(s). Are you sure you want to continue?"
camera_del_deleted_camera_tip	=	"The selected camera(s), as well as the snapshots and video recording(s) from the camera(s), will all be deleted. Are you sure you want to continue?"
camera_del_keep_all	=	"Keep all snapshots and recorded files"
camera_del_keep_event	=	"Keep all recorded files"
camera_del_remove_all	=	"Remove all snapshots and recorded files"
camera_del_remove_event	=	"Remove all recorded files"
camera_del_warning	=	"Are you sure you want to delete the selected camera(s)?"
camera_deleted	=	"Deleted"
camera_device	=	"Information"
camera_directory_repetition	=	"The name of the recording folder you entered already exists. Please enter another one."
camera_edge_recording	=	"Edge Storage Recording"
camera_enable_now	=	"Enable"
camera_enable_quota	=	"Enable quota"
camera_event_folder	=	"Recording archive folder"
camera_event_objsize	=	"Object size"
camera_event_percentage	=	"Trigger percentage"
camera_event_threshold	=	"Threshold"
camera_external_recording	=	"External Recording"
camera_field_disable_msg	=	"(Same with camera setting)"
camera_file_prefix	=	"File name prefix"
camera_file_rotation	=	"Archive rotation"
camera_finish_edit	=	"If you want to edit detailed settings or the recording schedule, go to <b>Camera</b> and click the <b>[ Edit ]</b> button."
camera_frame	=	"frames/sec"
camera_guard	=	"Patrol"
camera_guard_cycle	=	"Loops per cycle"
camera_guard_dlg_alert_disconnect	=	"Failed to retrieve the camera preset positions. We suggest you check camera connection before proceeding."
camera_guard_interval	=	"Interval"
camera_guard_select_patrol	=	"Select Patrol"
camera_io_recording	=	"Alarm Recording"
camera_ip_port_repetition	=	"This IP address and port have been used. Please enter new IP address or port."
camera_keep	=	"keep"
camera_liveview_all	=	"Live view all"
camera_liveview_setting	=	"Live View Image Settings"
camera_manual_recording	=	"Manual recording"
camera_media	=	"Video"
camera_mgr	=	"Manage"
camera_migrate_desc	=	"What would you like to do with the recordings after camera migration?"
camera_migrate_desc_tip	=	"What would you like to do with the snapshots and recordings after camera migration?"
camera_model_selection	=	"Setup"
camera_model_u_define	=	"User Define"
camera_motion_and_io_recording	=	"Motion Detection and Alarm Recording"
camera_motion_apply	=	"Apply"
camera_motion_area	=	"Detection Area"
camera_motion_detection	=	"Motion Detection Recording"
camera_motion_leverage_camera	=	"Motion detection by the camera"
camera_motion_recording	=	"Motion Detection Recording"
camera_motion_surveillance_station	=	"Motion detection by Surveillance Station"
camera_name	=	"Name"
camera_name_repetition	=	"This name has been used. Please enter another one."
camera_new	=	"Add Camera Wizard"
camera_new_desc	=	"Select a setup mode"
camera_no_recording	=	"Delete"
camera_not_available	=	"This camera is not available now."
camera_number	=	"Added/Max"
camera_one_step	=	"Quick Setup"
camera_one_step_desc	=	"Choose this option to quickly set up the camera. You can edit the details later."
camera_option	=	"Options"
camera_parameters	=	"Camera Optimization"
camera_patrol	=	"Patrol"
camera_patrol_alert_exceed	=	"The patrol exceeds the maximum number it supports."
camera_patrol_alert_name_empty	=	"Please enter the patrol name."
camera_patrol_alert_preset_exceed	=	"The maximum number of preset position is {0}. You have selected {1} extra presets."
camera_patrol_confirm_delete	=	" Are you sure you want to delete the selected target(s)?"
camera_patrol_preset_confirm_delete	=	" Are you sure you want to delete the patrol(s)?"
camera_patrol_preset_dialog_title	=	"Select preset positions"
camera_patrol_preset_list	=	"Preset position list"
camera_patrol_stay_time	=	"Interval"
camera_postrecording_time	=	"Post-recording time (sec.)"
camera_prerecording_time	=	"Pre-recording time (sec.)"
camera_preset	=	"Preset Position"
camera_preset_alert_exceed	=	"The preset position exceeds the maximum number it supports."
camera_preset_alert_name_empty	=	"Please enter the preset position name."
camera_preset_confirm_delete	=	"Are you sure you want to delete the preset position(s)?"
camera_preset_num_remind	=	"The selected camera supports up to {0} preset positions."
camera_preview	=	"Preview"
camera_px	=	"pixel"
camera_quota	=	"Quota"
camera_record	=	"Continuous Recording"
camera_record_codec	=	"Codec"
camera_record_setting	=	"Recording Image Settings"
camera_recording	=	"Recording Archives"
camera_rotate_by_date	=	"Keep the files within"
camera_rotate_by_space	=	"Limit the archive folder up to"
camera_rotate_days	=	"days"
camera_schedule	=	"Schedule"
camera_search_btn	=	"Search"
camera_select_vendor	=	"Please select"
camera_sensitivity	=	"Detection sensitivity"
camera_setting	=	"Settings"
camera_setting_tip	=	"Please go to Event Detection to check camera detection settings."
camera_setup_now	=	"Set up now"
camera_stop_preview	=	"Stop Preview"
camera_storage	=	"Used/Quota"
camera_storage_setting	=	"Storage Settings"
camera_summary_folder	=	"Folder"
camera_summary_fps	=	"Frame per second (FPS)"
camera_summary_prefix	=	"Prefix"
camera_summary_rot_date	=	"Archive duration"
camera_summary_rot_space	=	"Archive size"
camera_summary_sensitivity	=	"Sensitivity"
camera_summary_title	=	"SUMMARY"
camera_test	=	"Test Connection"
camera_type	=	"Camera type"
camera_video	=	"Video"
camera_wizard	=	"Complete Setup"
camera_wizard_desc	=	"Choose this option to set up the camera step by step."
camera_wizard_welcome_desc	=	"Camera Setup Wizard provides two setup modes to help you set up new cameras. In the "Quick Setup" mode, all you have to do is fill in the device information. In the "Complete Setup" mode, you will be guided through the following steps:<br /><p><ul><li>Fill in the device information</li> <li>Set up video settings</li> <li>Set up recording settings</li> <li>Set up the recording schedule</li> <li>Set up advanced settings</li></ul><p>"
camera_wizard_welcome_header	=	"Welcome to Camera Setup Wizard"
categ_fix_camera	=	"Fixed Camera"
categ_panoramic_camera	=	"Panoramic Camera"
categ_ptz_camera	=	"PTZ Camera"
categ_video_server	=	"Video Server"
cbr	=	"Constant"
ceiling	=	"Ceiling mount"
confirm_empty_account	=	"You have not entered the username and password for the camera. Are you sure you want to continue?"
confirm_enablecamera	=	"Do you want to enable camera(s) at the Camera page ?"
confirm_need_add_license	=	"There is no license available for adding cameras. Would you like to install another camera license?"
confirm_repeat_cam_ipport_edit	=	"The settings will be applied to all cameras with the same IP address and the cameras might be restarted as a result. Are you sure you want to continue?"
confirm_setupcamera	=	"Do you want to add camera(s) at the Camera page?"
conflict_mnttype	=	"This mount type conflicts with other cameras with the same IP address."
conn_status	=	"Status"
conn_status_configuring	=	"Configuring"
conn_status_deleted	=	"Deleted - video archives remained"
conn_status_deleting	=	"Deleting"
conn_status_disabled	=	"Disabled"
conn_status_disabling	=	"Disabling"
conn_status_err_auth	=	"Unauthorized"
conn_status_err_content	=	"Invalid image format"
conn_status_err_resolution	=	"Resolution error"
conn_status_failed	=	"Disconnected"
conn_status_limited	=	"Limited"
conn_status_migrating	=	"Migrating"
conn_status_normal	=	"Normal"
conn_status_others	=	"Others"
conn_status_paired	=	"Occupied"
conn_status_server_disconn	=	"Unknown - server disconnected"
conn_status_setting	=	"Activating"
conn_status_stopping	=	"Stopping"
conn_status_unknown	=	"Unknown"
conn_status_unrecognized	=	"Unrecognized"
conn_test_err_auth	=	"Authorization failed. Please check your username and password."
conn_test_err_dimension	=	"Incompatible image dimension"
conn_test_err_host	=	"Failed to connect the camera. Please check the following settings of the camera: IP address, hostname, port number."
conn_test_err_http	=	"Failed to connect the camera. Please check the following settings of camera: IP address, hostname, port number, camera model, source path."
conn_test_err_mem	=	"Insufficient memory"
conn_test_err_mjpeg	=	"Invalid image format."
conn_test_err_model	=	"Failed to identify specified camera. Please make sure the IP address, port number, and camera model are entered correctly. "
conn_test_err_multipart	=	"Invalid image format."
conn_test_err_stream	=	"Failed to receive video stream. Please check your network connection."
conn_test_err_udpstream	=	"Fail to receive video stream. Please open the camera's UDP port on your router. For further details please refer to the camera and router's setting pages."
conn_test_error	=	"Camera test failed."
conn_test_fail_msg	=	"Connection failed"
conn_test_ok	=	"Connection successful"
continuous_recording_time	=	"Save video every (minutes)"
custom_settings	=	"Custom Settings"
day_time_info	=	"If you set a time interval that spans into the next day, it will be a single scheduled policy."
days	=	"days"
description	=	"Setup and display your IP cameras."
detection_blank	=	"Please select at least one detection method."
device_type	=	"Device type"
disconnected_message	=	"Your camera may be disconnected."
edit_camera	=	"Edit Camera"
edit_camera_settings	=	"Camera Settings"
edit_detection_area	=	"Edit Detection Area"
edit_device_output	=	"Device Output"
edit_event_detection	=	"Event Detection"
edit_fisheye_dewarping	=	"Fisheye Dewarping"
edit_optimization	=	"Optimization"
edit_patrol	=	"Edit Patrol Path"
edit_preset	=	"Edit preset position"
edit_ptz_control	=	"PTZ Control"
edit_recording_settings	=	"Recording Settings"
enable_tunneling	=	"Tunnel RTSP and RTP over HTTP"
event_recording	=	"Recording"
field_of_view	=	"Field of view"
fix_camera	=	"Fixed camera"
floor_mount	=	"Floor mount"
folder_name_repetition	=	"This name has been used. Please enter another one."
group	=	"Group"
hardware_installation	=	"Hardware Installation"
insufficient_license_contact_admin	=	"Your license keys are insufficient to add more cameras. Please contact your Surveillance Station administrator."
invalid_camera_name	=	"Invalid entry for camera name."
invalid_folder_name	=	"Invalid entry for folder name."
invalid_frame_rate	=	"Invalid entry for camera frame rate (FPS)."
invalid_host_name	=	"Invalid camera IP address or hostname."
invalid_port	=	"Invalid entry for camera port."
invalid_prefix_name	=	"Invalid entry for file name prefix."
invalid_rotation_date	=	"The range must be between 1~1825"
invalid_rotation_size	=	"Invalid entry for archive rotation size."
invalid_sensitivity	=	"Invalid entry for motion detection sensitivity."
invalid_source_path	=	"Invalid entry for camera source path."
invalid_value	=	"Invalid value"
ip_camera	=	"IP Camera"
keep_original_camera_settings	=	"Keep original camera settings"
limit_to	=	"Limit to"
list	=	"List"
liveview_source	=	"Live View Source"
liveview_source_camera	=	"From camera"
liveview_source_surveillance	=	"From Surveillance Station"
liveview_stream	=	"Live View Stream"
max_disk_size	=	"The number you entered exceeds the available space of {0} GB."
migrate_del_desc_files	=	"All snapshots and recordings related to the migrated camera(s) will be permanently removed. This action is not reversible."
migrate_del_recording_desc	=	"All recordings related to the migrated camera(s) will be permanently removed. This action is not reversible."
migrate_desc_files	=	"All snapshots and recordings will be moved to the migration target server of your camera(s). The time it takes depends on the size of your snapshots and recordings."
migrate_rec_storage_removed_desc	=	"Unable to delete or migrate recordings of the selected camera(s) because the recording storage has been removed."
migrate_recording_desc	=	"All recordings will be moved to the server where the migrated camera(s) reside. Migration time will vary, depending on the size of your recordings."
migrate_reserve_desc_files	=	"All snapshots and recordings related to the migrated camera(s) will remain on the current server."
migrate_reserve_recording_desc	=	"All recordings related to the migrated camera(s) will remain on this server."
migrate_to_origin_server	=	"Some cameras already exist on the destination server. Do you want to continue?"
migrating	=	"Migrating"
migration_all_camera_added	=	"The selected cameras are already added to this server."
migration_camera_added	=	"The selected camera is already added to this server."
migration_confirm_delete	=	"Are you sure you want to delete the selected migration(s)?"
migration_description	=	"Migrate your IP cameras among servers."
migration_failed	=	"Failed"
migration_failed_dp_version_diff	=	"The versions of Device Pack on these two servers are not consistent."
mnt_conflict_enable	=	"There is a mount type conflict in this camera. Do you want to edit the mount type of this camera now?"
mnt_conflict_multi_enable	=	"There are some mount type conflicts among these cameras. Please make the mount types consistent before enabling these cameras."
mobile_liveview_stream	=	"Mobile Live View Stream"
motion	=	"Motion"
motion_area_add	=	"Add Area"
motion_area_max_reached	=	"Motion detection areas have reached its limit."
motion_area_name_invalid	=	"Invalid entry for detection area name."
motion_detection	=	"Motion Detection"
motion_detection_by	=	"Motion detection by"
motion_param_range	=	"Enter a value between 1 to 99 for each field. Refer to Help for more information."
mount_type	=	"Mount Type"
next_step	=	"Next"
no_cam_found	=	"No cameras were found"
no_cam_selected	=	"Please select at least 1 camera."
no_camera	=	"Welcome! You have not set up any IP camera."
no_camera_item_tip	=	"Please {0}add{1} cameras to safeguard your environment with Surveillance Station."
no_enable_camera	=	"Welcome! No IP camera is enabled."
no_migrate_tip	=	"Please {0}add{1} migration tasks to migrate camera settings and video recordings to another server."
occupied_size	=	"Storage Used"
panoramic_camera	=	"Panoramic camera"
previous_step	=	"Previous"
ptz_camera	=	"PTZ camera"
record_schedule	=	"Recording Schedule"
recording	=	"Recording"
recording_stream	=	"Recording Stream"
redudant_camera_name	=	"This name has been used. Please enter another one."
resource_usage	=	"Resource usage"
rotate_condition_remove	=	"remove old archives"
rotate_condition_stop	=	"stop recording"
rotation	=	"Rotation"
rotation_condition	=	"When space or time limit is reached"
rotation_option	=	"Archive Rotation Settings"
rotation_option_rotate	=	"Remove old archives when space or time limit is reached"
rotation_option_stop	=	"Stop recording when space or time limit is reached"
rtsp_rtp_setting	=	"RTSP & RTP Setting"
save_when_disable	=	"Operation failed because the camera is disabled."
save_when_disconnect	=	"Operation failed because the camera is disconnected."
select_server_alert	=	"Please select a server."
select_server_title	=	"Select a server for camera installation"
server_disconn_suggestion	=	"Failed to connect to the server of this camera. Please check the connection between your host and recording servers."
single_view	=	"Single view"
single_view_hint	=	"Surveillance Station will automatically switch to single view in 1x1 layout or when double-clicking a single stream. We recommend setting a stream with equal or better quality."
speed	=	"Speed"
start_trigger	=	"Activate Output"
stm_info_fps	=	"FPS"
stm_info_quality	=	"Quality"
stm_type_liveview	=	"Live view"
stm_type_mobile	=	"Mobile"
stm_type_recording	=	"Recording"
stop_manual_record	=	"Stop recording"
stream_allocation	=	"Stream Allocation"
stream_no	=	"Stream {0}"
transport_protocol	=	"Transport protocol"
tunnel	=	"Tunnel"
tv_standard	=	"TV standard"
tv_standard_info	=	"Choose a TV system standard which fits your camera model. Different standards will have different resolution and frame rate (FPS)."
unrecognized_suggestion	=	"It is suggested to delete this unrecognized device."
upgrade_dp	=	"The versions of Device Pack on the CMS host and the recording server are not consistent. If you want to use this camera on this server, please update Device Pack or Surveillance Station."
usage_bandwidth	=	"Bandwidth"
usage_cpu	=	"CPU"
usage_memory	=	"Memory"
vbr	=	"Variable"
video_server	=	"Video Server"
volume_evaluate	=	"Estimate Required Space"
volume_usage	=	"Space usage per day"
volume_warning	=	"The estimation may take some time. Are you sure you want to continue?"
wall_mount	=	"Wall mount"

[camera_batch]
add_batch	=	"Add Batch"
add_manually	=	"Add manually"
apply_default	=	"Apply defaults"
batch_add_select_edit_camera	=	"Select cameras to edit"
batch_add_server_auth_naming	=	"Verify cameras and edit naming rule"
batch_add_welcome_desc	=	"Batch Add Camera Wizard provides two setup modes to help you simultaneously add multiple new cameras to Surveillance Station. In the "Quick Setup" mode, the wizard will assist you to add cameras, set an account for camera verification, and edit naming rules for cameras of different brands and models. In the "Complete Setup" mode, you will be guided through the following steps:<br/><p><ul><li>Select camera brand and model</li> <li>Select cameras by search result or manual addition</li> <li>Enter account settings to verify cameras</li> <li>Edit naming rules for cameras</li> <li>Set up video settings</li> <li>Set up recording settings</li> <li>Set up the recording schedule</li> <li>Set up advanced settings</li></ul><p>"
batch_add_welcome_header	=	"Welcome to Batch Add Camera Wizard"
batch_edit	=	"Edit Batch"
batch_edit_welcome_desc	=	"Batch Edit Camera Wizard will help you edit the settings of multiple cameras all at a time. You will be guided through the following steps:<br /><p><ul><li>Select camera brand and model</li> <li>Select cameras</li> <li>Set up video settings</li> <li>Set up recording settings</li> <li>Set up the recording schedule</li> <li>Set up advanced settings</li></ul><p>"
batch_edit_welcome_header	=	"Welcome to Batch Edit Camera Wizard "
camera_batch_add	=	"Batch Add Camera Wizard"
camera_batch_edit	=	"Batch Edit Cameras"
camera_error_auth	=	"Cannot add unauthenticated cameras or cameras that failed authentication. Do you want to authenticate these cameras now?"
camera_name	=	"Camera Name"
default_naming	=	"Default Naming"
default_password	=	"Default Password"
default_username	=	"Default Username"
duplicate_name	=	"Camera name cannot be repeated. Please specify a different name and try again."
edit_naming_rule	=	"Edit naming rules for cameras"
failed_verify_camera	=	"Failed to verify the camera."
msg_no_select_camera	=	"Please select at least one camera to edit."
must_sel_cam_to_add	=	"Please select at least one camera."
naming_prefix	=	"Custom prefix"
naming_rule_model	=	"Model-No."
naming_rule_prefix	=	"Prefix-No."
pending_verification	=	"Pending"
select_add_camera	=	"Select cameras to add"
select_cam_upper_bound	=	"You can select up to {0} camera(s) to add."
select_camera	=	"Select cameras"
select_edit_camera	=	"Select cameras"
select_edit_model	=	"Select camera brand and model"
verified	=	"Verification status"
verify	=	"Verify"
verify_sel_cameras	=	"Enter account settings to verify selected cameras"

[camera_group]
all_groups	=	"All Groups"
camera_group_add_camera	=	"Add"
camera_group_alert_num_limit	=	"The maximum number of camera group is {0}."
camera_group_cameras	=	"Included Cameras"
camera_group_confirm_delete	=	"Are you sure to delete the selected camera group(s)?"
camera_group_edit_dlg_title	=	"Camera Group"
camera_group_empty_message	=	"Please {0}edit{1} to add more cameras."
camera_group_filter_result_count	=	"{0} search results"
camera_group_remove_camera	=	"Remove"
cp_ddtext	=	"Copy to "{0}\042"
group_list	=	"Group List"
mvcp_ddtext	=	"Copy or move to "{0}\042"
no_camera_group_tip	=	"Please {0}create{1} groups to categorize cameras."
rm_ddtext	=	"Remove camera(s) from the group"

[common]
description	=	"Surveillance Station is a web-based application that can manage IP cameras to safeguard your home or office environment. With Surveillance Station, you can watch and record live view videos, set up scheduled recording, playback recorded events via web browser, VisualStation, or mobile device for remote monitoring. Notifications can also be sent to you whenever important events occur."
dev_fail_desc	=	"Hard disk failed or disk was not detected."
displayname	=	"Surveillance Station"
error_contact_support	=	"An error occurred. Please contact Synology Technical Support."
error_system	=	"The operation failed."
fast	=	"Fast"
general_settings	=	"General Settings"
run	=	"Run"
running	=	"Running"
show_desktop	=	"Show Desktop"
slow	=	"Slow"
stop	=	"Stop"
stopped	=	"Stopped"
time_out	=	"Connection Timeout"
time_seconds	=	"seconds"

[desktop]
add_desktop_shortcut	=	"Create desktop shortcut"
add_to_desktop	=	"Add to desktop"
add_widget_to_desktop	=	"Add to desktop"
app_cnt_limit	=	"Number of launched applications reached the limit."
confirm_unload	=	"You are about to log out of Surveillance Station. Are you sure you want to continue?"
expose_window	=	"Pilot View"
mainmenu	=	"Main Menu"
maximize	=	"Maximize"
minimize	=	"Minimize"
msg_shortcut_not_exist	=	"The item this shortcut refers to no longer exists."
no_shortcut_privilege	=	"You have insufficient privileges to launch this shortcut. Please contact the administrator."
open_in_new_window	=	"Open in new window"
remove_shortcut	=	"Remove shortcut"
restore	=	"Restore"
shortcut_zone_instruction	=	"Drag and drop applications to create desktop shortcuts"
show_desktop	=	"Show Desktop"
taskbar_pin	=	"Pin to Taskbar"
taskbar_unpin	=	"Unpin from Taskbar"
upgrade_ie_browser	=	"Please upgrade to the latest version of Internet Explorer browser to get the best quality."
user_app	=	"Applications"

[device_pack]
addons_description	=	"Manage add-ons"
auto_check_and_download	=	"Check and download update regularly"
btn_manual_update	=	"Manual Update"
confirm_restore	=	"Restoring Device Pack to default will lessen camera compatibility, and Surveillance Station will be restarted. Are you sure you want to continue?"
confirm_settings	=	"Confirm settings"
device_pack	=	"Device Pack"
dp_maintainer	=	"Developer"
dp_support_list	=	"If you want to learn more about the full list of camera models supported by this version of Device Pack, please click {0}here{1} to visit the page."
dp_upgrade_desc	=	"Device Pack enhances the camera compatibility of Surveillance Station. You can update here, or download Device Pack from Synology's {0}Download Center{1} and update manually. To check which cameras are supported by your current version of Device Pack, please see our {2}Camera Support List{3}. (Updating Device Pack without getting the latest camera firmware might cause compatibility issues.)"
dp_upgrade_note	=	"Please note that Device Pack updates correlate with the version of Surveillance Station."
field_status	=	"Status"
forbid_downgrade	=	"Please install Device Pack version {0} or onward. You cannot downgrade it to the older version {1}."
intro_dp	=	"You can enhance camera compatibility by updating Device Pack."
invalid_file	=	"Invalid file format."
item	=	"Item"
plat_not_support	=	"This Device Pack is not supported on the platform of {0}."
ready_update	=	"This wizard will apply the following settings and start updating Device Pack."
release_date	=	"Release date"
restore_default	=	"Restore Defaults"
restore_dp_title	=	"Restore Device Pack"
restoring_default	=	"Restoring to default..."
sel_file	=	"Please select a file."
ss_ver_too_old	=	"This Device Pack requires Surveillance Station version {0} or onward."
status_check_new_dp	=	"Checking for the latest Device Pack update..."
status_check_new_dp_err	=	"Connection failed. Please check your Internet connection."
status_dp_download_err	=	"Failed to download Device Pack. Please check your Internet connection."
status_dp_downloading	=	"Downloading..."
status_dp_upgrading	=	"Updating Device Pack..."
status_new_dp_available	=	"{0} is available for download."
status_no_new_dp	=	"Your Device Pack version is up-to-date."
status_ready_to_upgrade	=	"{0} is ready to update."
update_btn_download	=	"Download"
update_btn_retry	=	"Try Again"
update_btn_upgrade	=	"Update Now"
update_dp_title	=	"Update Device Pack"
update_dp_whats_new	=	"What's New"
updating	=	"Updating..."
upload_dp	=	"Choose a file to upload"
value	=	"Value"
warring_restart	=	"Surveillance Station will be restarted after the settings are applied. Are you sure you want to continue?"

[digital_output]
alert_current_state_unsupport	=	"Not supported to retrieve the current state of digital outputs from this camera."
current_state	=	"Current State"
digital_output	=	"Digital Output"
grounded_circuit	=	"Grounded circuit"
keep_camera_setting	=	"Keep original camera settings"
normal_state	=	"Normal State"
open_circuit	=	"Open circuit"
unknown_state	=	"Unknown"

[edge_storage]
apply_sch	=	"Apply custom schedule to the camera"
bat_title	=	"Edge Storage Batch Edit Wizard"
bat_wizard_sel_cam	=	"Please select cameras to apply edge storage settings"
bat_wizard_setting	=	"Please set up the edge storage service and download schedule"
cam_download	=	"Download recordings from camera storage"
cam_enable_setting	=	"Enable edge recording to record and store videos to the camera storage"
check_storage_space	=	"Check Camera Storage"
check_storage_status	=	"Check Storage Status"
daily	=	"Daily"
days	=	"Days"
download	=	"Download Lost Clips from Camera"
download_elapse	=	"Elapsed Time"
download_list	=	"Download List"
download_now	=	"Download Now"
download_sch	=	"Download Schedule"
download_sch_tip	=	"If "Retrieve on schedule" is chosen, you need to set a download schedule to retrieve videos periodically."
download_size	=	"Download Size"
download_tip	=	"Start recording on the edge storage of a selected camera by ticking the checkbox, and retrieve video recordings periodically from the camera by setting up a download schedule. If no schedule is set, you can still download lost recordings from the edge storage manually."
edge_recording	=	"Edge Recording"
edge_storage	=	"Edge Storage"
enable_setting	=	"Enable edge storage to store recordings on the camera"
format_busy	=	"Failed to format the SD card because the device does not exist or is busy."
format_camera_storage	=	"Format Camera Storage"
format_fail	=	"Format Unsuccessful"
format_successfully	=	"Format Successful"
format_warning_message	=	"Warning: Formatting camera storage will completely erase all its contents. Are you sure you want to continue?"
formating	=	"Formatting..."
no_edge_record_tip	=	"Please check the settings of the cameras supporting edge storage and make sure you have enabled edge storage."
rec_on_edge	=	"Record and store videos on the camera, and schedule tasks to retrieve recordings"
rec_on_ss	=	"Save recordings on Surveillance Station"
recommended	=	"(recommended)"
recording_location	=	"Recording Destination"
recording_sch_tip	=	"If "Retrieve when connection is restored" or "Do not retrieve" is chosen, you need to set a recording schedule for Surveillance Station. This schedule will not affect video retrieving."
recording_schedule	=	"Recording schedule"
retrieve_do_nothing	=	"Do not retrieve"
retrieve_lost_rec	=	"Retrieve when connection is restored"
retrieve_on_sch	=	"Retrieve on schedule"
retrieve_recording	=	"Video retrieval method"
sd_card_no_card	=	"No card"
sd_card_ready	=	"Card ready"
set_fail	=	"Failed to apply edge storage settings properly."
set_sch_tip	=	"Please go to the camera's configuration webpage to set the recording schedule."
status_all	=	"All Status"
task	=	"Task"
task_downloading	=	"Downloading"
task_failed	=	"Failed"
task_finished	=	"Finished"
task_info	=	"Task Info"
task_number	=	"Number of Tasks"
task_pending	=	"Pending"
task_stopped	=	"Stopped"
trig_mode_same_with_cam	=	"Same as camera"
video_duration	=	"Video Duration"
video_start_time	=	"Video Start Time"
weekdays	=	"Weekdays"
weekend	=	"Weekend"

[emap]
attr_resolution	=	"Resolution"
back_to	=	"Return to {0}"
click_to	=	"Switch to E-map {0}"
click_to_preview	=	"Click to preview"
description	=	"Setup and manage E-map."
drag_2_emap	=	"* Drag items from the left panel onto your e-map."
drop_file	=	"Drop Image Here"
emap_add	=	"Add E-map"
emap_add_desc	=	"Select a server to add e-maps"
emap_alert_image_format	=	"Invalid image format."
emap_alert_no_image	=	"Please upload an image."
emap_alert_num_limit	=	"The maximum number of e-Map is {0}."
emap_alert_upload_failure	=	"Failed to upload the image. Please try again."
emap_camera_list	=	"Camera"
emap_confirm_delete	=	"Are you sure you want to delete these e-Maps?"
emap_dbclick_note	=	"Double-click to change direction"
emap_edit	=	"Edit E-map"
emap_edit_dlg_title	=	"E-Map Configurations"
emap_image_note	=	"The suggested image size is {0} in {1} format."
emap_item_setting	=	"Item Settings"
emap_list	=	"E-Map List"
emap_map_list	=	"E-Map List"
emap_name_repetition	=	"This name has been used. Please enter another one."
emap_number	=	"E-map number"
emap_return_top	=	"Return to Main Map"
emap_select_layout	=	"Select Layout(s)"
emap_viewer	=	"E-Map Viewer"
emap_volume_limit	=	"The volume of e-maps has reached the limit."
emap_wait_upload_msg	=	"Uploading..."
failed_read_image_attr	=	"Failed to read the attributes of the selected image. Please check the image format and its file extension."
filetable_upload	=	"Upload"
no_emap_tip	=	"Please {0}add{1} e-maps to pinpoint the location of cameras."
upload_no_file	=	"No file chosen"

[enhancement]
brightness	=	"Brightness"
contrast	=	"Contrast"
saturation	=	"Saturation"
sharpness	=	"Sharpness"

[event]
action_seek	=	"Seek"
action_title	=	"Action"
archive_lock_all	=	"Lock all"
archive_lock_category	=	"Lock this category"
archive_lock_filtered	=	"Lock filtered items"
archive_lock_filtered_category	=	"Lock filtered items in this category"
archive_lock_page	=	"Lock all on this page"
archive_lock_selected	=	"Lock selected items"
archive_no	=	"No"
archive_unlock_all	=	"Unlock all"
archive_unlock_category	=	"Unlock this category"
archive_unlock_filtered	=	"Unlock filtered items"
archive_unlock_filtered_category	=	"Unlock filtered items in this category"
archive_unlock_page	=	"Unlock all on this page"
archive_unlock_selected	=	"Unlock selected items"
archive_yes	=	"Yes"
archiving	=	"Archiving..."
archiving_wait	=	"This recording is being archived. Please wait..."
auto_playlist	=	"Auto Playlist"
cal_month1	=	"January"
cal_month10	=	"October"
cal_month11	=	"November"
cal_month12	=	"December"
cal_month2	=	"February"
cal_month3	=	"March"
cal_month4	=	"April"
cal_month5	=	"May"
cal_month6	=	"June"
cal_month7	=	"July"
cal_month8	=	"August"
cal_month9	=	"September"
cal_next_year	=	"Next"
cal_prev_year	=	"Previous"
cal_week1	=	"Mon"
cal_week2	=	"Tue"
cal_week3	=	"Wed"
cal_week4	=	"Thu"
cal_week5	=	"Fri"
cal_week6	=	"Sat"
cal_week7	=	"Sun"
create_auto_playlist	=	"Create auto playlist"
create_playlist	=	"Create playlist"
date	=	"Date"
datetime	=	"Date & Time"
delete_category	=	"Delete this category"
delete_filtered	=	"Delete filtered items"
delete_filtered_category	=	"Delete filtered items in this category"
delete_page	=	"Delete this page"
delete_selected	=	"Delete selected items"
description	=	"Watch and manage the recordings."
display_title	=	"Display"
edit_playlist	=	"Edit playlist"
event_archive	=	"Lock"
event_browser_suggestion	=	"Windows Internet Explorer (32-bit)/Firefox/Chrome or Mac Safari 5.1 onward is recommended to play MPEG4 and H.264 recordings."
event_choose_camera	=	"Please select a camera"
event_clear_archive	=	"Unlock"
event_col_archive	=	"Locked"
event_col_location	=	"File path"
event_col_mgr	=	"Management"
event_col_name	=	"Camera"
event_col_preview	=	"Privilege preview"
event_col_reason	=	"Mode"
event_col_size	=	"Size"
event_col_start	=	"Start Time"
event_col_stop	=	"Stop Time"
event_controler	=	"Controller"
event_del_all_confirm_msg	=	"All recordings of all cameras will be deleted. Do you want to continue?"
event_del_all_warning	=	"All filtered recordings will be deleted. Do you want to continue?"
event_del_progress_prefix	=	"Deleting..."
event_del_warning	=	"All selected recordings will be deleted. Do you want to continue?"
event_detail	=	"Recording Information"
event_duration	=	"Duration"
event_export	=	"Download"
event_filter	=	"Filter"
event_filter_go	=	"Go"
event_filter_info	=	"You are searching for"
event_lock_warning	=	"Some recordings are locked and you need to unlock them before removing them."
event_management	=	"Management"
event_next_frame	=	"Next frame"
event_number	=	"Recording number"
event_pause	=	"Pause"
event_play	=	"Play"
event_playback	=	"Recording Playback"
event_player	=	"Recording Player"
event_pre_frame	=	"Previous frame"
event_rows_per_page	=	"Items per Page"
event_select_date	=	"Date"
event_select_time	=	"Time"
event_setting	=	"Notification"
event_source	=	"Source"
event_source_group	=	"Group"
event_source_mount	=	"Mounted"
event_source_remote	=	"Remote"
event_status	=	"Status"
event_status_deleted	=	"The selected recording has already been deleted."
event_status_deleting	=	"Deleting"
event_status_locked	=	"Locked"
event_status_recorded	=	"Recorded"
event_status_recording	=	"Recording"
event_stop	=	"Stop"
event_stop_recording	=	"Stop Recording"
event_time	=	"Time"
event_time_from	=	"From"
event_time_to	=	"To"
event_timeline	=	"Timeline"
event_unarchive	=	"Unlock"
fast_forward	=	"Fast forward"
next_event	=	"Next"
next_page	=	"Next"
no_event_tip	=	"Please go to IP Camera and check the recording schedule to see if you have activated video recording."
no_event_to_operation	=	"Please select at least one recording."
no_event_to_play	=	"There is no recording to play."
no_next_event	=	"This is the last recording."
no_previous_event	=	"This is the first recording."
non_recording_mode	=	"Non-recording mode"
non_sync_mode	=	"Switch to non-sync mode"
playback_title	=	"Playback"
player_cnt_limit	=	"The number of players has reached the limit."
player_section	=	"Time slicing"
player_time	=	"Duration / Timestamp"
playlist	=	"Playlist"
previous_event	=	"Previous"
previous_page	=	"Previous"
recording_event_undownloadable	=	"The video is currently being recorded and not downloadable."
recording_existed	=	"Some selected recording(s) already exist(s) in the playlist."
recordings	=	"Recording"
repeat_all_btn_title	=	"Repeat All"
repeat_one_btn_title	=	"Repeat One"
seek_description	=	"Please specify the time to start seeking for recordings."
select_playlist_desc	=	"Please select the playlist mode:"
slow_down	=	"Slow motion"
some_event_not_exist	=	"Some recordings no longer exist."
sort_by_time	=	"Sort by time"
switch_to_sync_mode	=	"Switch to sync mode"
sync_mode	=	"Sync Mode"
sync_playback	=	"Sync Playback"
syncing	=	"Syncing..."
time_ascending	=	"Time ascending"
time_descending	=	"Time descending"
timeline_1h	=	"Hour"
timeline_24h	=	"Day"
timeline_description	=	"Play recordings with timeline."
timeline_layout_win_title	=	"Timeline Layout Management"
timespan_title	=	"Time Span"
total_events	=	"Total"

[event_achieving]
cannot_export_during_migration	=	"Cannot export camera recordings during migration."
dest_server	=	"Destination server"
dest_server_folder	=	"Destination server / folder"
destination	=	"Destination"
event_achieving	=	"Recording Archiving"
event_export	=	"Export"
event_mount	=	"Mount"
event_mount_alert_num_limit	=	"You can mount {0} archives at most."
export_camera	=	"Cameras"
export_confirm_del	=	"Are you sure you want to remove the selected archives from the list?"
export_del_file	=	"Delete all exported files"
export_description	=	"Export the recordings to other shared folders."
export_dest	=	"Destination"
export_dest_describe	=	"Select a destination to save the archives."
export_keep_file	=	"Keep all exported files"
export_msg_invalid_range	=	"Invalid date and time range."
export_msg_name_exist	=	"The name is in use."
export_msg_name_overwrite	=	"The archive name is already in use. Do you want to overwrite it?"
export_msg_no_event	=	"There is no recording within this period. Please reselect the date and time."
export_msg_no_select	=	"Please select at least one camera."
export_name	=	"Archive"
export_name_describe	=	"Name your export archive to distinguish between different archives."
export_range_describe	=	"Select the date and time range of the recordings to be exported."
export_starting_msg	=	"Recordings are now being exported."
export_status_complete	=	"Finished"
export_status_exporting	=	"Exporting"
export_status_failed	=	"Failed"
export_status_no_space	=	"Not enough space"
export_status_space_check	=	"Checking available space"
export_wizard_camera	=	"Select cameras to export recordings"
export_wizard_name	=	"Create An Archive"
export_wizard_range	=	"Select date and time to export"
mount_auto_browse_events	=	"The selected archive is mounted now. Do you want to browse its recordings in "Recording List"?"
mount_browse_events	=	"Browse Recordings"
mount_confirm_del	=	"Are you sure you want to remove the selected archives from the list?"
mount_description	=	"Mount the recordings from other shared folders."
mount_msg_invalid_name	=	"Invalid name format"
mount_msg_is_mounted	=	"Selected archives are already mounted."
mount_msg_no_select	=	"Please select at least one exported archive to mount."
mount_msg_unbrowasble_event	=	"Cannot browse recordings in mounted archive if the status is "{0}"."
mount_name	=	"Name"
mount_select_mount	=	"Select a mounted archive to view its recordings in "Recording List"."
mount_src	=	"Shared folder"
mount_src_describe	=	"Select a source from the drop down menu. Then select the archives to mount."
mount_status_disabled	=	"Disabled"
mount_status_normal	=	"Normal"
mount_status_unreachable	=	"Inaccessible"
mount_wizard_title	=	"Mount Exported Archives"
no_archive_avail	=	"No archive available."
no_export_tip	=	"Please {0}add{1} a task to export video recordings for backup purposes."
no_mount_tip	=	"Please {0}add{1} a task to mount video recordings."
read_only_tips	=	"Source directory read-only. [{0}] functions may be affected during the playback of mounted recordings."
samba_is_not_enable_warning	=	"Windows File Service will be enabled for this action. Do you want to continue?"
select_server	=	"Please select a server"
source	=	"Source"
source_server	=	"Source server"
start_datetime	=	"Start date/time"
start_time	=	"Start Time"
stop_datetime	=	"Stop date/time"
stop_time	=	"Stop Time"
wizard_export	=	"Recording Export Wizard"
wizard_mount	=	"Recording Mount Wizard"

[event_detection]
alarm_level	=	"Alarm level"
by_camera	=	"By camera"
can_not_guarantee_sync	=	"Disabled parameters might not be synchronized with the camera."
detection_source	=	"Detection Source"
enter_value_between	=	"Please enter a value between {0} and {1}."
non_triggered	=	"Untriggered"
setting_apply_all_alarms	=	"This setting will be applied to all alarms."
tampering	=	"Tampering"
trigger_duration	=	"Time to trigger"
trigger_state	=	"Trigger State"

[extlang]
afterPageText	=	"of {0}"
alphaText	=	"This field should only contain letters and underscore (_)."
alphanumText	=	"This field should only contain letters, numbers, and underscore (_)."
apr	=	"April"
aug	=	"August"
beforePageText	=	"Page"
cancel	=	"Cancel"
closeText	=	"Close this tab"
columnsText	=	"Columns"
ddText	=	"{0} selected row(s)"
dec	=	"December"
displaypage	=	"Displaying {0} - {1} of {2}"
emailText	=	"This field should be an e-mail address, e.g.: user@domain.com."
feb	=	"February"
fieldblank	=	"This field is required."
fieldmaxlen	=	"The maximum length for this field is {0}."
fieldminlen	=	"The minimum length for this field is {0}."
firstpage	=	"First Page"
friday	=	"Friday"
invalidText	=	"Incorrect value."
invalidnumber	=	"{0} is not a valid number."
jan	=	"January"
jul	=	"July"
jun	=	"June"
lastpage	=	"Last Page"
loading	=	"Loading..."
lockText	=	"Lock column"
mar	=	"March"
maxdate	=	"This date must be before the maximum date."
maxnumber	=	"The maximum number is {0}."
may	=	"May"
mindate	=	"This date must be after the minimum date"
minnumber	=	"The minimum number is {0}."
monday	=	"Monday"
monthYearText	=	"Choose month (Control+Up/Down to move years)"
nextmonth	=	"Next Month (Control+Right)"
nextpage	=	"Next Page"
no	=	"No"
nov	=	"November"
oct	=	"October"
ok	=	"OK"
pagenodata	=	"No data "
prevmonth	=	"Previous Month (Control+Left)"
prevpage	=	"Previous Page"
refresh	=	"Refresh"
saturday	=	"Saturday"
sep	=	"September"
sortAscText	=	"Sort ascending"
sortDescText	=	"Sort descending"
sunday	=	"Sunday"
thursday	=	"Thursday"
todayText	=	"Today"
todayTip	=	"{0} (Spacebar)"
tuesday	=	"Tuesday"
unlockText	=	"Unlock column"
urlText	=	"This field should be an URL, e.g.: http://www.domain.com."
wednesday	=	"Wednesday"
yes	=	"Yes"

[fisheye]
double_panorama	=	"Double Panorama"
fisheye_dewarping	=	"Fisheye Dewarping"
fisheye_region_management	=	"Fisheye Dewarping Management"
hemi	=	"Hemi"
original_view	=	"Original View"
panorama	=	"Panorama"
quad_view	=	"Quad View"
region	=	"Region"
region_confirm_delete	=	"Are you sure you want to delete the selected region(s)?"
spherical_projection	=	"Spherical projection"
triple_view	=	"Triple View"

[global_search]
emap	=	"EMap"
visualstation	=	"Visual Station"

[guard]
all_presets	=	"All Presets"
drag_hint	=	"You can drag preset item(s) to change the order of the guard path."
guard_alert_no_guard	=	"The patrol schedule has not been set. Are you sure you want to continue?"
guard_alert_select_preset	=	"Please select a preset."
guard_path	=	"Guard Path"
guard_patrol_path_2	=	"2 Points Patrol"
guard_patrol_path_3	=	"3 Points Patrol"
guard_patrol_path_4	=	"4 Points Patrol"
guard_patrol_preset_info	=	"Preset Information"
guard_preset_limit_remind	=	"Note: Reached maximum allowable presets. Please choose from existing presets."
guard_preset_select_add_new	=	"Add preset"
guard_preset_select_exist	=	"Select existing preset"
guard_preset_set_direction	=	"Set #{0} Point"
guard_select_patrol_mode	=	"Add Patrol Path"
guard_set_patrol_info	=	"Patrol Informaiton"
guard_set_preset	=	"Set Preset"
guard_setting	=	"Patrol Settings"
guard_wizard	=	"Patrol Wizard"
guard_wizard_welcome_desc	=	"Patrol Wizard will help you set up patrol paths, preset positions, patrol information, and patrol schedule for PTZ-supported cameras. You will be guided through the following steps:<br /><p><ul><li>Set up patrol paths</li> <li>Set up preset positions</li> <li>Set up patrol information</li> <li>Set up the patrol schedule</li></ul><p><br />"
guard_wizard_welcome_header	=	"Welcome to Patrol Wizard"
included_presets	=	"Included Presets"
pan_tilt	=	"Pan/Tilt"
patrol_schedule	=	"Patrol Schedule"
preset_count	=	"Preset count"
ptz_speed_control	=	"PTZ Speed Control"
too_few_preset_hint	=	"Please include at least {0} presets."

[helpbrowser]
apptitle	=	"Help"
error	=	"Error"
font_extra_large	=	"Extra Large"
font_large	=	"Large"
font_normal	=	"Normal"
font_size	=	"Font size"
hbtoc	=	"Contents"
help_from_ds	=	"Offline"
help_from_syno	=	"Online"
help_source	=	"Source"
home	=	"Home"
nextpage	=	"next"
options	=	"Options"
prevpage	=	"previous"
title	=	"Surveillance Station Help"

[helptoc]
access_controller_advanced	=	"Advanced"
access_controller_list	=	"Access Controllers"
access_controller_logcenter	=	"Log Center"
action_rule	=	"Action Rule"
action_rule_list	=	"List"
advance	=	"Advanced"
advanced	=	"Advanced"
advanced_tab_addons	=	"Add-ons"
alert_panel	=	"Alert Panel"
alert_title	=	"Alerts"
audio_output	=	"Audio Output"
audio_pattern	=	"Audio Pattern"
axis_access_controller	=	"Axis Door Controller"
backup_and_restore	=	"Backup and Restore"
camera_advanced	=	"Advanced"
camera_group	=	"Manage Camera Group Settings"
camera_guard	=	"Patrol"
camera_management	=	"Camera Management"
camera_preset	=	"Preset Position"
camera_preview	=	"Camera Preview"
camera_recording	=	"Recording Settings"
camera_settings	=	"Camera Settings"
camera_video	=	"Video"
card_holder	=	"Cardholders"
central_management	=	"CMS"
centralized	=	"Server"
cms_advanced	=	"Advanced"
compatibility	=	"Surveillance Station Requirements"
configure_camera	=	"Configure Camera Settings"
device	=	"Device"
device_info	=	"Information"
device_pack	=	"Device Pack"
digital_output	=	"Digital Output"
edge_recording	=	"Edge Recording"
edit_device_output	=	"Device Output"
edit_event_detection	=	"Event Detection"
edit_fisheye_dewarping	=	"Fisheye Dewarping"
edit_optimization	=	"Optimization"
edit_ptz_control	=	"PTZ Control"
email_notification	=	"Email"
emap	=	"E-Map"
emap_list	=	"List"
emap_viewer	=	"E-Map Viewer"
event	=	"Browse Recordings"
event_player	=	"Recording Player"
export_event	=	"Export"
ip_camera	=	"IP Camera"
joystick	=	"Joystick"
license	=	"License"
live_view	=	"Live View"
liveview_analytics	=	"Live View Analytics"
liveview_analytics_setting	=	"Settings"
log	=	"Log"
migration	=	"Migration"
monitor_liveview	=	"Monitor Live Views"
motion_detection	=	"Motion"
mount_event	=	"Mount"
notification	=	"Notification"
notification_advanced	=	"Advanced"
options	=	"Options"
options_account	=	"Account"
options_description	=	"Edit personal settings."
options_others	=	"Others"
privilege	=	"Privilege"
privilege_profile	=	"Privilege Profile"
ptz_advanced	=	"Advanced"
pushservice_notification	=	"Push Service"
recording	=	"Recording"
recording_advanced	=	"Advanced"
recording_list	=	"List"
rule_history	=	"History"
schedule	=	"Schedule"
service	=	"Service"
smartsearch	=	"Smart Search"
sms_notification	=	"SMS"
snapshot	=	"Snapshot"
snapshot_advanced	=	"Advanced"
snapshot_editor	=	"Snapshot Editor"
snapshot_list	=	"List"
ss_help_description	=	"Help"
surveillance_desktop	=	"Surveillance Station Desktop"
system_setting	=	"System Settings"
tampering	=	"Tampering"
timeline	=	"Timeline Playback"
trigger_alarm	=	"Alarm"
trigger_audio	=	"Audio"
user	=	"User"
user_list	=	"List"
visualstation	=	"VisualStation"
work_timeline	=	"Work with Timeline"

[image_selector]
default_wallpaper	=	"Default Wallpaper"
error_not_an_image	=	"Please select one image"
folder_empty	=	"There are no images in this folder."
history	=	"My Previous Images"
my_image	=	"My Images"
source_upload	=	"Upload"
title_upload_local	=	"Use My Image"
user_file_upload_fail	=	"Failed to upload the file. Please check your network connection."

[install]
incompatibility_check_hint	=	"Please carefully read the compatibility restrictions, and tick the checkbox to proceed."
incompatibility_checkbox	=	"I understand the compatibility restrictions, and wish to proceed with the update."
wizard_imcompatible_vs_hint	=	"This version of Surveillance Station is only compatible with VisualStation {0} and onward. VisualStation VS60 and VS80 models are no longer supported by this version of Surveillance Station."
wizard_unsupport_vs_warning	=	"VS60 and VS80 are no-longer supported. Installing this package will remove the all VS60 adn VS80 in Surveillance."
wizard_upgrade_hint	=	"Upgrading to Surveillance Station requires database conversion and thus may take a while, depending on the number of recordings in the database. Please wait patiently and do not power off the system or uninstall the package during this process."
wizard_upgrade_title	=	"Read before proceeding"

[joystick]
button	=	"Button"
config_reset_default	=	"Reset"
detect_note	=	"*Push the L+R buttons to switch to mouse mode."
detect_note_2	=	"*Push the L+R buttons to switch to joystick mode."
edit_joystick	=	"Joystick Settings"
export_complete	=	"Joystick configuration is exported."
export_dest_describe	=	"Select a destination to save the joystick configuration file."
import_complete	=	"Joystick configuration is imported."
joystick	=	"Joystick"
joystick_control	=	"Joystick control"
msg_pluged	=	"Joystick ({0}) is plugged in."
msg_snapshot_fail	=	"Camera ({0}) failed to take the snapshot."
msg_unpluged	=	"Joystick ({0}) is plugged out."
opt_fix_aspect_ratio_switch	=	"Fixed aspect ratio"
opt_full_screen_switch	=	"Full screen"
opt_next_preset	=	"Next preset"
opt_no_action	=	"Please choose an action"
opt_pause_resume	=	"Pause/Resume"
opt_previous_preset	=	"Previous preset"
opt_select_channel	=	"Enable/Disable PTZ control"
opt_setting	=	"Joystick settings"
opt_show_hide_info	=	"Show/Hide information"
opt_single_multi_layout_switch	=	"Single/Multiple layouts"
opt_to_patrol	=	"Patrol"
opt_to_preset	=	"Preset"
schematic_diagram	=	"Preview"
setting_note	=	"Press and hold for three seconds to open/close joystick settings"
snapshot_path_seetting	=	"Set a snapshot path"
to_patrol_note	=	"Select an existing patrol path and click this hot key for the camera to patrol."
to_preset_note	=	"Select an existing preset position and click this hot key for the camera to go to the chosen preset."

[ldap_error]
ldap_gid_already_exists	=	"GID is already existed."
ldap_groupname_already_exists	=	"The group name already exists. Please enter a different one."
ldap_insufficient_access	=	"Permission denied. Please contact the server administrator."
ldap_invalid_credentials	=	"Invalid credentials. Please check your account name and password."
ldap_invalid_dn_syntax	=	"Invalid DN format."
ldap_no_such_object	=	"{0} doesn't exist on the LDAP server. It may be removed by the administrator. Please refresh the page and try again later."
ldap_operations_error	=	"Failed to connect to the LDAP server. Please check the server address and your network settings."
ldap_protocol_error	=	"Failed to connect to the LDAP server. Please try again later."
ldap_server_not_support	=	"The LDAP server is not supported."
ldap_timelimit_exceeded	=	"The operation timed out. Please contact the administrator of the LDAP server."
ldap_uid_already_exists	=	"UID is already existed."
ldap_username_already_exists	=	"The user name already exists. Please enter a different one."

[license]
add_camera_licenses	=	"Add camera licenses"
add_license_wizard	=	"Add License Wizard"
agreement_1	=	"‧This license key can be applied to only one Synology NAS Server at a time."
agreement_2	=	"‧This license key cannot be distributed or provided to any third party."
agreement_3	=	"‧This license key should be kept in a safe place. Synology will provide no replacement for any loss of this license key."
agreement_footer	=	"If you agree with the terms above, select Agree, enter the license key, and click OK."
agreement_header	=	"Thank you for purchasing the Synology Camera License Pack. Upon applying the license key, you agree with the following terms and conditions. Any violation will subject you to the legal liabilities under the applicable laws and regulations."
alert_invalid_license	=	"Invalid entry for license key."
alert_license_add_failed	=	"Failed to install the license."
alert_no_free_license	=	"You will not have enough number of licenses after the deletion. Are you sure you want to continue?"
alert_no_license_selected	=	"Please select at least 1 license."
alert_used_license	=	"The license key has been used. Please enter an unused license key."
all_license	=	"All Licenses"
cms_license_max_str	=	"This central management system supports up to {0} camera licenses. You have already installed {1} license(s)."
confirm_delete_all_license	=	""All licenses will be deleted (total {0} licenses). Do you want to continue?""
confirm_delete_categ_license	=	"All licenses in this category will be deleted (total {0} licenses). Do you want to continue?"
confirm_delete_license	=	"Are you sure you want to delete the selected license(s)?"
confirm_exceed_max	=	"The number of licenses will exceed the supported camera number after this installation. Are you sure you want to install this license?"
confirm_show_full_key	=	"Please enter the password to your DSM account."
default_license	=	"Default License"
description	=	"Manage license keys for IP cameras."
duplicated_license	=	"Duplicate license key(s)"
expired_license_tooltip	=	"This license key expired."
hide_full_key	=	"Hide"
input_license	=	"Enter the license key"
install_license	=	"Install License"
insufficient_license_alert_msg_admin_usr	=	"Live View and Timeline are disabled due to insufficient camera licenses. Please {0}add{1} more camera licenses or {2}remove{3} installed cameras to solve this issue."
insufficient_license_alert_msg_admin_usr_2	=	"Live View and Timeline are disabled due to insufficient camera licenses. Please make sure this recording server and the CMS host are paired properly."
insufficient_license_alert_msg_viewer	=	"Live View and Timeline are disabled due to insufficient camera licenses. Please contact the administrator of Surveillance Station."
invalid_license	=	"Invalid license key(s)"
invalid_license_tooltip	=	"This license is invalid. Please contact your reseller."
invalid_licenses	=	"Invalid license key(s)."
license_agree	=	"Agree"
license_agreement	=	"Agreement"
license_available	=	"Available"
license_disagree	=	"Disagree"
license_expired_date	=	"Expiration Date"
license_install_date	=	"Install Date"
license_key	=	"License Key"
license_max_str	=	"This {0} supports up to {1} camera licenses. You have already installed {2} license(s)."
license_mgr	=	"Management"
license_quota	=	"License Number(s)"
license_total	=	"Total"
license_use_str	=	"Currently you have used {0} of {1} valid camera licenses."
license_used	=	"Used"
no_quota_del_server	=	"Current license quota is {0} and will be insufficient after removing this recording server. Please delete {1} camera(s) before proceeding."
paste_keys	=	"You can paste more than one license key here."
purchase_license	=	"Contact your reseller to purchase the Synology Camera License Pack."
rec_ds_had_duplicated_license	=	"This recording server has {0} license key(s) identical to the one(s) in the central management system. Please remove the duplicate license key(s) and try again."
rec_ds_had_invalid_license	=	"There are {0} invalid license key(s) installed on this recording server. Please remove the license key(s) below and try again."
rec_ds_had_rec_ds_duplicated_license	=	"This recording server has license key(s) identical to the one(s) on other recording server(s) you are about to add to the central management system. Please remove the duplicate license key(s) and try again."
rec_ds_had_rec_ds_duplicated_license_alert	=	"There are identical license keys among the recording servers you are about to add to the central management system. Please remove the duplicate license keys and try again."
show_full_key	=	"Show"
show_full_key_dlg_title	=	"Show License Key"
wizard_add_license_limit	=	"You can add up to {0} license keys at a time with this wizard."

[liveview]
alert_no_quota_record_manually	=	"The recording archive of this camera has reached its quota limit. Please change your <b>Archive Rotation Settings</b> to record manually."
audio_off	=	"Volume off"
audio_on	=	"Volume on"
auto_pan	=	"Auto pan"
btn_switch_view	=	"Switch view"
dbclick_camera_note	=	"Double click to view {0}"
description	=	"Watch live view of IP cameras."
digital_output	=	"Digital output"
digital_zoom_off	=	"Digital zoom off"
digital_zoom_on	=	"Digital zoom on"
fix_aspect_ratio	=	"Fixed aspect ratio"
instant_playback	=	"Instant playback"
layout_channel_split	=	"Split"
liveview_absolute_position	=	"Absolute position"
liveview_alert_layout_delete_last	=	"You must keep at least one layout."
liveview_alert_layout_load_error	=	"Error occurred while loading layouts."
liveview_alert_layout_name_empty	=	"Please enter a layout name."
liveview_alert_layout_name_exist	=	"The layout name already exists."
liveview_alert_layout_name_limit	=	"Please limit the layout name to {0} characters or less."
liveview_analytics_alert_not_setup	=	"Please set up Live View Analytics settings under the Management page on your camera first."
liveview_analytics_enable_camera_desc	=	"Enable or disable Live View Analytics on each individual camera."
liveview_browser_suggestion	=	"Windows Internet Explorer (32-bit)/Firefox/Chrome or Mac Safari 5.1 onward is recommended to watch MPEG4 and H.264 live views."
liveview_camera_unavailable	=	"Unavailable"
liveview_confirm_layout_delete	=	"Are you sure you want to delete the selected layout?"
liveview_confirm_layout_save	=	"Changes are not saved. Do you want to save them?"
liveview_digital_zoom_in	=	"Digital zoom-in"
liveview_digital_zoom_out	=	"Digital zoom-out"
liveview_disable_analytics	=	"Stop video analytics"
liveview_down	=	"Down"
liveview_drag_zoom	=	"Drag and zoom"
liveview_enable_analytics	=	"Start video analytics"
liveview_focus	=	"Focus"
liveview_full_screen	=	"Full screen (right-click to exit)"
liveview_hide_cam_label	=	"Hide information"
liveview_home	=	"Home"
liveview_iris	=	"Iris"
liveview_layout	=	"Layout"
liveview_layout_DS_all	=	"All"
liveview_layout_DS_localhost	=	"Local host"
liveview_layout_DS_native	=	"Local"
liveview_layout_block	=	"Channel"
liveview_layout_blocks	=	"Channels"
liveview_layout_camera_group	=	"Camera Group"
liveview_layout_config	=	"Configure"
liveview_layout_default	=	"Set as default"
liveview_layout_dlg_title	=	"Layout Management"
liveview_layout_interval	=	"Interval"
liveview_layout_list_title	=	"Layout list"
liveview_layout_name	=	"Name"
liveview_layout_name_limit	=	"At most 20 characters."
liveview_layout_preview_snapshot	=	"Preview"
liveview_layout_preview_text	=	"Text"
liveview_layout_sequence	=	"Sequence"
liveview_layout_sequence_list	=	"Rotation sequence"
liveview_layout_tooltip_serverlist	=	"Server list"
liveview_layout_type	=	"Layout Type"
liveview_layout_user_default	=	"Set as my default"
liveview_layout_win_title	=	"Live View Layout Management"
liveview_layouts	=	"Layouts"
liveview_left	=	"Left"
liveview_lens	=	"Lens"
liveview_no_emap	=	"None"
liveview_reset_digital_zoom	=	"Reset digital zoom"
liveview_right	=	"Right"
liveview_save_snapshot	=	"Right click to save the snapshot."
liveview_search	=	"Seek"
liveview_show_cam_label	=	"Show information"
liveview_size	=	"Frame size"
liveview_smartsearch	=	"Smart Search"
liveview_up	=	"Up"
liveview_volume_add	=	"Turn up volume"
liveview_volume_sub	=	"Turn down volume"
liveview_zoom	=	"Zoom"
liveview_zoomin	=	"Zoom In"
liveview_zoomout	=	"Zoom Out"
nitem_ddtext	=	"{0} item(s) selected"
no_emap_found	=	"No e-map available."
no_event	=	"No event available"
no_event_within_24hours	=	"No recordings available within the past 24 hours."
obj_tracking	=	"Object tracking"
on_off	=	"Toggle"
pause_off	=	"Resume"
pause_on	=	"Pause"
plz_add_patrol	=	"Please add a patrol path first."
plz_add_preset	=	"Please add a preset position first."
seek	=	"Go To"

[liveview_analytics]
alert_panel	=	"Alert Panel"
alert_panel_empty_hint	=	"No event has been detected."
alert_title	=	"Alerts"
alerts	=	"alert(s)"
all_types	=	"All types"
analytics_chart	=	"Analytics Chart"
analytics_player	=	"Player"
analytics_status	=	"Analytics Status"
analytics_type	=	"Analytics Type"
archive	=	"Lock"
beep_when_detected	=	"Beep when detected"
clear_all	=	"Clear All "
counting_type	=	"Direction"
detection_zone	=	"Detection Zone"
display_counting_line	=	"Show boundary line"
display_tracking_lines	=	"Show path tracking"
display_virtual_fences	=	"Show virtual fence"
display_virtual_zones	=	"Show virtual zone"
edit_liveview_analytics	=	"Edit Live View Analytics"
enable_analytics	=	"Enable Analytics"
forbiden_type	=	"Direction"
frequency	=	"Frequency"
from_latest	=	"From the latest"
history_back	=	"Back"
history_clear_all_confirm_msg	=	"All history logs will be deleted. Are you sure you want to continue?"
history_clear_confirm	=	"All selected history logs will be deleted. Do you want to continue?"
history_clear_filtered_confirm	=	"All filtered history logs will be deleted. Are you sure you want to continue?"
history_empty_hint	=	"Please check that the Live View Analytics of cameras in this layout has been enabled."
history_title	=	"Analytics History"
not_configured	=	"Not configured"
object_size	=	"Object Size"
one_way	=	"One way"
rec_delete_failed_because_upgrade_needed	=	"Some recordings cannot be deleted. Please upgrade your recording server to the latest version and delete them again."
remove_analytics_notification	=	"Some video analytics (Tally Counter and Virtual Fence) will be removed in the next version."
select_all	=	"Select all"
sensitivity	=	"Sensitivity"
sensitivity_high	=	"High"
sensitivity_low	=	"Low"
sensitivity_medium	=	"Medium"
settings_empty_hint	=	"Please add cameras in this layout."
show_tracking	=	"Show detection frames"
simulation	=	"Simulation"
two_way	=	"Two way"
view_alerts	=	"View Alerts"
within_minutes	=	"Within (minutes)"

[localdisplay]
DNS_server	=	"DNS server"
admin_account	=	"Administrator's account:"
apply_setting_upper	=	"Applying System Settings..."
celsius	=	"°C"
clean_install	=	"Clean installation: keep my files only"
clean_install_info	=	"Keep my files, whereas all settings and data will be restored to default."
confirm_check	=	"I understand that all data on these hard disks will be removed."
confirm_desc	=	"All data on the hard disk(s) {0} will be removed during installation. Are you sure you want to proceed?"
confirm_install	=	"I understand that all data on my hard disks will be deleted when the installation begins."
diskcheck_title	=	"Disk check"
enable_now	=	"Enable Now"
eula	=	"By clicking Install Now, you agree to the <a href='http://www.synology.com/company/terms_conditions.php?lang=enu#tabs-terms-EULA' target='_blank'>End User License Agreement</a>."
eula_postfix	=	"End User License Agreement"
fahrenheit	=	"°F"
format_sys	=	"Formatting system partition"
install_hint	=	"Please ensure you have backed up hard disks before installing."
install_info_desc	=	"Enter the required server information."
install_language_desc	=	"Please pick a default language."
install_network_desc	=	"Please choose a network configuration according to your environment."
install_nodisk_hint	=	"Install hard disks before setting up your NVR."
install_now	=	"Install Now"
install_nvr_hint	=	"Safeguard your environment with Synology NVR."
install_nvr_info	=	"NVR Info"
install_surveillance_title	=	"Install NVR"
install_time_setting	=	"Enter the required time zone, date and time information for your server."
install_unknow_error	=	"Oops... Unknown Error!"
install_unknow_error_hint	=	"Please restart your NVR by pressing the power button and try again."
install_volume_title	=	"SHR and Volume Creation"
install_wait_SSPkg	=	"Installing Surveillance Station. Please wait..."
install_wait_sys_partition	=	"Establishing system partition. Please wait..."
install_waiting_desc	=	"After the installation, your NVR will be restarted. While you are waiting, visit {0} to learn more about the Surveillance Station running on your NVR."
install_waiting_no_reboot	=	"While you are waiting, visit {0} to learn more about the Surveillance Station running on your NVR."
installing	=	"Installing..."
interrupt_diskcheck	=	"Shutting down your {0} will interrupt the disk integrity checking currently underway. We recommend that you wait for it to complete. Are you sure you want to shut it down now?"
lang_display_hint	=	"Select the display language."
migrate_step_desc	=	"A previous DSM installation is found on the hard disks of your DiskStation and it ran into a problem while migrating to the new DSM installation. Choose your action from the below options."
migrate_step_title	=	"Select Installation Type"
ni_wait	=	"Your NVR will be ready soon. Please wait..."
no_cam_found	=	"No IP Cameras Found"
no_cam_found_msg	=	"Please access your NVR ({0}) from a Web browser on your computer, go to Surveillance Station and click the Management tab to add IP cameras."
ntp_update_failed	=	"Error occurred while {0} was synchronizing with {1}."
ntp_update_success	=	"Successfully synchronized with {0}."
ntp_updatenow	=	"Update Now"
ntpdate_enable	=	"Synchronize with a NTP server"
nvr_server_name	=	"Server name"
passwd_confirm	=	"Confirm new password:"
passwd_create	=	"New password:"
process_again	=	"Try again"
region	=	"Region"
setup_network	=	"Setup Network"
show_next_time	=	"Show this window again next time"
status_paritycount	=	"Checking parity consistency."
suggested	=	"(recommended)"
system_migration	=	"Migration: keep my files and most of the settings"
system_migration_info	=	"Visit www.synology.com for the complete system migration tutorial."
tcpip_ip_used	=	"The IP address has been used!"
time_manual	=	"Manually"
time_now	=	"Current Time"
time_setting	=	"Time Setting"
upgrade_msg	=	"There will be no screen display for about a minute during upgrade. Do you want to continue?"
vidio_output_disabled	=	"Local Display Disabled"
volume	=	"Volume"
volume_mount_volume	=	"Mounting volume"
volume_start_raid	=	"Starting RAID"
volume_status_background	=	"Verifying hard disks in the background"
volume_status_create	=	"Creating"
volume_status_finalize_vol	=	"Activating volume..."
volume_status_init_disk	=	"Initializing disk..."
volume_status_paritycount	=	"Checking parity consistency."
volume_status_resync	=	"Re-synchronizing"
volume_status_waiting	=	"Waiting"

[login]
error_cantlogin	=	"The account or password is invalid. Please try again."
error_expired	=	"Your account has been disabled. Please contact the administrator."
error_guest	=	"Cannot login as guest. Please use another account to login."
error_interrupt	=	"You have signed in on another computer. Please log in again."
error_noprivilege	=	"You are not authorized to use this service."
error_systemfull	=	"You cannot login to the system because the disk space is full currently. Please restart the system and try again."
error_timeout	=	"Connection expired. Please login again."
error_two_managers	=	"Another manager has signed in. You are logged out automatically."
mult_manager_login	=	"Another Surveillance Station manager has logged in. Please try logging in again later."
rememberme	=	"Remember me"

[menu]
event_list	=	"Recording List"
event_manager	=	"Event Manager"
menu_advance	=	"Advanced"
menu_device	=	"Device"
menu_recording	=	"Recording"
menu_system	=	"System"
system_manager	=	"Management"

[options]
account	=	"Account"
background_color	=	"Background color"
customize_color	=	"Customize color"
customize_wallpaper	=	"Customize wallpaper"
default_app	=	"Application to open at login"
disable_logout_confirm	=	"Do not show leave confirmation dialog"
error_files	=	"Error occurred on"
error_format	=	"Unsupported format."
error_size	=	"File size exceeds the 1MB limit."
login_background_position_center	=	"Center"
login_background_position_fill	=	"Fill"
login_background_position_fit	=	"Fit"
login_background_position_stretch	=	"Stretch"
login_background_position_tile	=	"Tile"
my_favorite	=	"My Favorites"
others	=	"Others"
prompt_size	=	"The limit of maximum file size is 1MB."
remember_window_state	=	"Restore previous session windows upon login"
reset_desktop	=	"Reset Desktop"
reset_desktop_status	=	"Reset Surveillance Station desktop to default"
reset_desktop_status_warn	=	"The desktop and related settings will be reset to default. Are you sure you want to continue?"
select_image	=	"Select image"
text_color	=	"Text color"

[pushservice]
note_for_add_contact	=	"Please log in to your Windows Live Messenger/Skype to accept friend invitation from Synology to receive instant messaging notifications."

[share_folder]
error_volume_not_available	=	"Volume not found. Please check if the volume status is normal."
share_already_exist	=	"A shared folder with the same name already exists. Please enter another name."
share_folder_name	=	"Name"
share_folder_volume	=	"Location"
share_forbidden	=	"This shared folder is currently unavailable. Please check the folder status and try again."
volume_free_size	=	"Available"
wizard_install_notice	=	"If you choose to create this recording shared folder on your local volume, the folder name will be surveillance by default. If you want to create this recording folder on a cluster volume, please rename it first since shared folders on cluster cannot have the same name reserved for system use."
wizard_install_title	=	"Please set up a recording folder"

[smartsearch]
advanced	=	"Advanced"
alarm_time	=	"time"
alert_search_finish	=	"Smart Search has finished."
alert_set_object	=	"Please drag to resize and reposition the yellow rectangle that covers the object."
alert_set_zone	=	"Please drag on the grid to set detection zone(s)."
all	=	"All"
attributes	=	"Attributes"
available_time	=	"Assigned Time Slot"
clear	=	"Clear"
clear_all	=	"Clear All "
confirm_search_next_day	=	"Would you like to continue searching for recordings on the next day?""
continue_search	=	"Continue"
control_title	=	"Control"
description	=	"Start smart search for recordings."
display_tracking_lines	=	"Show path tracking"
dwell_time	=	"Dwell time"
edit_detection_zone	=	"Detection Zone"
edit_object_size	=	"Object Size"
go_next_hour	=	"Skip forward 1 hour"
go_prev_hour	=	"Skip backward 1 hour"
high_sensitivity	=	"High sensitivity"
in	=	"In"
include	=	"Select"
interval	=	"Interval"
interval_all	=	"All Frames"
invalid_search_end_time	=	"Search start time must be earlier than end time. Do you want to go to the setup page now?"
low_sensitivity	=	"Low sensitivity"
medium_sensitivity	=	"Medium sensitivity"
mount_cannot_lock	=	"Mounted recordings cannot be locked/unlocked."
no_camera_available	=	"No camera available."
no_item_list	=	"No matched item"
out	=	"Out"
result_list_title	=	"Result List"
search_area	=	"Search Area"
search_done	=	"Search complete"
search_end_time	=	"Specify the end time for search"
search_result	=	"Search Result"
search_type	=	"Search Type"
search_type_focus_lost	=	"Focus Lost"
search_type_foreign_object	=	"Foreign Object"
search_type_loitering_detection	=	"No-Idle Zone"
search_type_missing_object	=	"Missing Object"
search_type_motion	=	"Motion Detection"
search_type_object_counting	=	"Tally Counter"
search_type_occlusion	=	"Camera Occlusion"
search_type_virtual_fence	=	"Virtual Fence"
sec_dwell_time	=	"{0} second(s) of dwell time"
select_all	=	"Select all"
sensitivity	=	"Sensitivity"
sensitivity_high	=	"High"
sensitivity_low	=	"Low"
sensitivity_medium	=	"Medium"
show_on_screen	=	"Show on screen"
specify_attributes	=	"Specify recording mode(s)"
specify_interval	=	"Specify search interval"
start_search	=	"Search"
stop_search	=	"Pause"
sub_image_size	=	"1/{0} screen size"
sub_object_size	=	"{0}x object size"
wrong_direction	=	"Restricted zone"

[snapshot]
add_timestamp	=	"Add timestamp to the image"
always_show	=	"Always show"
append_timestamp	=	"Add timestamp when downloading snapshots"
archive	=	"Snapshot Archive"
blur	=	"Blur"
del_all_confirm_msg	=	"All snapshots from all cameras will be deleted. Are you sure you want to continue?"
del_all_warning	=	"All filtered snapshots ({0} in total) will be deleted. Are you sure you want to continue?"
del_warning	=	"The snapshot will be deleted. Do you want to continue?"
display_duration_setting	=	"On-screen Thumbnail Display Time"
display_duration_tip	=	"Displayed time of snapshot thumbnail"
editor_cnt_limit	=	"The number of editors has reached the limit."
filesize_limit	=	"Limit the snapshot folder size up to"
last_duration	=	"Duration"
last_seconds	=	"Show for {0} seconds"
lock_warning	=	"Some snapshots are locked. To remove them, please unlock them first."
mask	=	"Mask"
modified	=	"Modified"
no_snapshot_tip	=	"No snapshot"
not_support_tip	=	"Not supported in this browser."
rotate_left	=	"Rotate left"
rotate_right	=	"Rotate right"
save	=	"Save"
save_as	=	"Save As"
save_modify_tip	=	"Save the modification and overwrite the original file"
save_new_tip	=	"Save as a new snapshot"
save_tip	=	"Do you want to modify original snapshot or create a new snapshot? (The watermark will be unauthorized if you choose to modify the original snapshot)"
snapshot_editor	=	"Snapshot Editor"
snapshot_viewer	=	"Snapshot Editor"
taken_date	=	"Taken Date"

[ss_centralized]
access_block	=	"Access Block"
access_from_rec	=	"Access from recording server"
add_batch	=	"Batch Add Server Wizard"
add_server	=	"Add Server"
add_server_with_insufficient_license_alert_msg	=	"Cannot add this recording server due to insufficient camera licenses. Please add more camera licenses or remove installed cameras and try again."
add_server_wizard	=	"Add Server Wizard"
added_camera	=	"Cameras"
admin_password	=	"admin password"
advanced_setting	=	"Modify your CMS pairing settings."
all_servers	=	"All Servers"
apply_naming_rule	=	"Apply naming rule"
auto	=	"Auto"
batch_add_server	=	"Batch Add Servers"
batch_add_server_with_insufficient_license_alert_msg	=	"Cannot add some of the recording servers due to insufficient camera licenses. Please add more camera licenses or remove installed cameras and try again."
batch_edit_wizard_tle	=	"Enter 'admin' password and name the servers"
cam_to_migrate	=	"Cameras to migrate"
clear_pairing_status	=	"Clear Pairing Status"
clear_pairing_status_comfirm	=	"This server will be unpaired with the host server. Are you sure you want to continue?"
click_disable_rec_server_msg	=	"CMS service is disabled on this server. Please click <b>Enable</b> to activate its CMS service."
client_cms_key_name	=	"Set Authentication Key"
cms_change_reload	=	"Central Management System (CMS) settings have been changed by another administrator. The page will be refreshed."
cms_closed_reload	=	"Central Management System (CMS) service has been disabled by another administrator. The page will be refreshed."
cms_mode	=	"CMS Mode"
cms_setting	=	"CMS Setting"
create_rec_server	=	"Create recording server"
custom_name	=	"Custom name"
default_ds_name	=	"Default DiskStation name"
description	=	"Setup and manage your CMS servers."
disable	=	"Disable"
dsm_version	=	"DSM version"
dup_server	=	"This server already exists and cannot be added."
duplicate_server_name	=	"Server name cannot be repeated. Please specify a different name and try again."
edit_rec_server	=	"Edit recording server"
edit_server_with_insufficient_license_alert_msg	=	"Cannot edit this recording server due to insufficient camera licenses. Please add more camera licenses or remove installed cameras and try again."
edit_slave_ds	=	"Edit Server"
enable	=	"Enable"
enable_cms_client_wizard	=	"Central Management System Wizard"
enable_cms_service	=	"CMS service is disabled on this server. Do you want to activate its CMS service now?"
enable_dup_server_alert_msg	=	"Some of the servers already exist and cannot be enabled."
enable_samba_warning	=	"Windows File Service will be enabled after switching to recording server. Do you want to continue?"
enable_samba_warning_when_search	=	"Windows File Service on this server will be enabled after switching to recording server. Do you want to continue?"
enable_server_with_insufficient_license_alert_msg	=	"Cannot enable the selected recording server(s) due to insufficient camera licenses. Please add more camera licenses or remove installed cameras and try again."
enable_video_relay	=	"Enable video relay over the Internet automatically"
error_rekey	=	"The authentication keys do not match. Please retype them."
from_server	=	"Server"
host_disabled_on_eds14_msg	=	"EDS14 cannot be chosen as the host server."
host_server_mode	=	"Host server mode"
label_none	=	"None"
label_server	=	"Server"
license_cms_tip	=	"All camera licenses are now centralized and managed on CMS host {0}."
lock_hint	=	"Lock your recording server to prevent other servers from changing your settings."
lock_rec_server	=	"Lock me (Recommended)"
lock_recserver	=	"Prevent other CMS hosts from pairing with this recording server"
lock_setting	=	"Lock Setting"
lock_status	=	"Lock status"
login_ds_describe	=	"Please enter the server's admin password for accessing."
login_ds_name	=	"Enable CMS Service"
migrate	=	"Migrate"
migrate_all_files	=	"Migrate all snapshot and recording files"
migrate_all_rec_files	=	"Migrate all recording files"
migrate_batch	=	"Migrate Batch"
migrate_camera	=	"Migrate Camera"
migrate_del_files	=	"Delete all snapshot and recording files"
migrate_del_rec_files	=	"Delete all recording files"
migrate_msg_no_select	=	"Please select at least one camera to migrate."
migrate_reserve_files	=	"Reserve snapshot and recording files"
migrate_reserve_rec_files	=	"Reserve recording files"
migrate_server_select	=	"Select a destination server for camera migration"
migrate_wizard	=	"Migrate Wizard"
migration	=	"Migration"
msg_confirm_delete	=	"Are you sure you want to delete the selected server(s)?"
msg_connect_failed	=	"Failed to connect to the client."
msg_connect_host_failed	=	"Failed to connect to the CMS host."
naming_rule	=	"Naming rule"
native_server	=	"Local"
no_access_recserver	=	"Prevent users on this recording server from making changes to it"
no_server_found	=	"No servers were found."
no_server_selected	=	"Please select at least one server."
no_server_tip	=	"Please {0}add{1} servers to start using the CMS service."
no_space_migrate	=	"There is not enough space on the destination server for migrated recordings."
notadminuser	=	"Permission denied. Please use an account that belongs to the <b>administrators</b> group."
notadminuser_no_html_tag	=	"Permission denied. Please use an account that belongs to the administrators group."
occupied	=	"Occupied"
occupied_msg	=	"This recording server is occupied by another CMS host."
pair_setting	=	"Pairing Settings"
pair_status	=	"Pairing status"
paired_host_server	=	"Paired CMS Host"
pairing_lock	=	"Pairing Lock"
rec_server_access_blocked	=	"Blocked"
rec_server_access_unblocked	=	"Unblocked"
rec_server_autosearch_fail_msg	=	"Failed to search for recording servers. Please check your network settings and try again."
rec_server_has_been_locked	=	"This recording server is locked and cannot be added. Please unlock it first."
recommended	=	"(Recommended)"
recording_server_info_desc	=	"Please manage settings, watch live view videos, and playback recordings via CMS host."
recording_server_info_title	=	"Recording Server Mode"
recording_server_mode	=	"Recording server mode"
recording_server_warning_msg	=	"Recording server is in the middle of [{0}]. Are you sure you want to continue?"
security_lock	=	"Security Lock"
sel_cam_to_migrate	=	"Select cameras to migrate"
select_edit_server	=	"Select servers to edit"
select_server_title	=	"Select a server for installation"
server_authenticate	=	"Authentication"
server_error_auth	=	"Cannot add unauthenticated servers or servers that failed authentication. Do you want to authenticate these servers now?"
server_info	=	"Server Information"
server_name	=	"Server name"
server_status_locked	=	"This recording server is locked to the paired CMS host."
server_status_locking	=	"Locking"
server_status_unlocking	=	"Unlocking"
service_locked	=	"Please manage settings, watch live view videos, and playback recordings via CMS host. If you want to adjust CMS settings, click here to view {0}CMS{1} window."
set_cms_key_describe	=	"This wizard will log into Surveillance Station as admin to set authentication key for the client. Other users with administrative privileges will be automatically logged out."
slave_ds_list	=	"Client list"
slave_ds_search_title	=	"Server Search Results"
source	=	"Source"
ss_perm_denied	=	"This user is not authorized to access Surveillance Station."
status_rec_storage_removed	=	"Recording storage removed"
sync_time_with_host	=	"Synchronize the time on this server with CMS host"
test_conn_cms_disabled_alert	=	"CMS service is disabled on this server. Please activate its CMS service and try again."
test_slave_ds	=	"Test Connection"
time_sync	=	"Time Synchronization"
time_sync_host	=	"Time sync (NTP)"
unlock_rec_server	=	"Unlock me"
unpaired	=	"Unpaired"
upgrade_notification	=	"The Surveillance Station version installed is incompatible with the recording server.<br />Please update to the latest version and enable the recording server again."
upgrade_required	=	"At least one recording server has installed an incompatible version of Surveillance Station that prevents the operation from being performed. Please make sure each recording server has updated to the latest version."
verification	=	"Verification"
video_relay_desc	=	"Video relay service over the Internet"
wizard_migrate	=	"Camera Migration Wizard"
wrong_type_msg	=	"Cannot connect to another CMS host."

[ss_common]
about	=	"About"
account_user_name	=	"Username"
activex_browser_restart	=	"Please restart IE browser to apply new video streaming component, do you want to continue? (Notice: Please make sure if your video card fully supports OpenGL to ensure the system reliability.)"
activex_graphic_lib	=	"Streaming object"
advanced	=	"Advanced"
advanced_tab_addons	=	"Add-ons"
alert_is_not_number	=	"Please input numerals only."
alert_user_kickout	=	"Another user with administrator privileges has logged in. You have been automatically logged out. "
allowed	=	"Allowed"
application	=	"Application"
ask_cont	=	"Are you sure you want to continue?"
auto	=	"Auto"
batch_edit	=	"Edit Batch"
block	=	"Block"
camera_group_amount_cameras	=	"Camera number"
cameras	=	"Cameras"
categ_all_brand	=	"All Brands"
categ_all_camera_grp	=	"All Cameras"
categ_all_controller	=	"All Controllers"
categ_all_dates	=	"All Dates"
categ_all_device	=	"All Devices"
categ_all_status	=	"All Status"
categ_all_types	=	"All Types"
category	=	"Category"
change_password	=	"Change Password"
check_activeX_suggestion	=	"Please install and enable the ActiveX object."
check_javaplugin_suggestion	=	"Please install {0} and enable Java applet plugin."
check_plugin_suggestion	=	"Please {0}download{1} and install the plugin."
choose	=	"Select"
choose_ctrl_remind	=	"Press and hold the "Shift" or "Ctrl" key for multiple selection."
close	=	"Close"
comma	=	","
commfail	=	"Connection failed. Please check your network settings."
common_action	=	"Action"
common_add	=	"Add"
common_alert_desc_length_exceed	=	"The description should not exceed {0} characters."
common_alert_name_empty	=	"Please enter a name."
common_alert_name_length_exceed	=	"Please limit the name to {0} characters or less."
common_all	=	"All"
common_all_cameras	=	"All Cameras"
common_apply	=	"Apply"
common_camera	=	"Camera"
common_camera_group	=	"Camera Group"
common_cancel	=	"Cancel"
common_central_management	=	"CMS"
common_centralized	=	"Central Management System (CMS)"
common_colon	=	":"
common_confirm_save	=	"Changes are not saved. Do you want to save them?"
common_connecting	=	"Connecting"
common_copy	=	"Copy"
common_custom_layout_desc	=	"Drag to customize the layout."
common_customize	=	"Customize"
common_delete	=	"Delete"
common_delete_all	=	"Delete all"
common_deleting	=	"Deleting..."
common_description	=	"Description"
common_disable	=	"Disable"
common_disabled	=	"Disabled"
common_edit	=	"Edit"
common_emap	=	"E-Map"
common_enable	=	"Enable"
common_enabled	=	"Enabled"
common_event	=	"Recording"
common_exit	=	"Exit"
common_filename	=	"Name"
common_filesize	=	"Size"
common_finish	=	"Finish"
common_fisheye	=	"Fisheye"
common_generic	=	"Advanced"
common_help	=	"Help"
common_image	=	"Image"
common_image_enhancement	=	"Image Enhancement"
common_infinite	=	"Infinite"
common_install	=	"Install"
common_langcode	=	"enu"
common_license	=	"License"
common_liveview	=	"Live View"
common_liveview_analytics	=	"Live View Analytics"
common_loading	=	"Loading..."
common_lock	=	"Lock"
common_lock_status	=	"Locked"
common_log	=	"Log"
common_logout	=	"Logout"
common_minute	=	"minute"
common_move	=	"Move"
common_move_down	=	"Down"
common_move_up	=	"Up"
common_name	=	"Name"
common_name_repetition	=	"This name has been used. Please enter another one."
common_none	=	"None"
common_not_authorized	=	"Not authorized"
common_off	=	"Hide"
common_ok	=	"OK"
common_on	=	"Show"
common_options	=	"Options"
common_page	=	"Page"
common_privilege	=	"Privilege"
common_refresh	=	"Refresh"
common_reset	=	"Reset"
common_save	=	"Save"
common_saving	=	"Saving..."
common_search	=	"Search"
common_second	=	"sec."
common_select	=	"Please select"
common_smartsearch	=	"Smart Search"
common_snapshot	=	"Snapshot"
common_success	=	"Successful"
common_total_page	=	"Total pages"
common_trigger	=	"Trigger"
common_type	=	"Type"
common_unlock	=	"Unlock"
common_unlock_status	=	"Unlocked"
common_unrecognized	=	"Unrecognized"
common_upload	=	"Upload"
common_user	=	"User"
common_vs	=	"VisualStation"
common_wait	=	"wait"
common_welcome	=	"Welcome"
confirm_lostchange	=	"Changes are not saved. Are you sure you want to leave?"
confirm_pwd	=	"Confirm password"
controller	=	"Controller"
credential	=	"Credentials"
default	=	"Default"
desktop	=	"Desktop"
device_info	=	"Information"
disallowed	=	"Deny"
dont_remind_again	=	"Don't remind me again!"
dont_show_next_time	=	"Do not show this message again"
double_applet_warning	=	"Failed to load this page. Please close another browser window or tab that contains live view or recording player, and then try again."
ds_model	=	"Model"
enter_name	=	"Please enter a name"
err_pass	=	"The password is invalid."
error_bad_field	=	"Field value is invalid."
error_invalid	=	"Operation invalid."
error_privilege_not_enough	=	"Sorry, this user account has not been assigned proper privileges to perform this action."
error_repswd	=	"Failed to confirm password. Please enter it again."
error_system	=	"The operation failed."
error_timeout	=	"Connection Expired."
error_usernum_exceed_limit	=	"The number of users has reached the system limit. Remove some users and try again."
external_device	=	"External device"
external_device_capitalization	=	"External Device"
external_event	=	"External event"
field_max_val	=	"The maximum value for this field is {0}."
field_min_val	=	"The minimum value for this field is {0}."
field_val_multiple	=	"The value for this field should be multiple of {0}."
file_format	=	"Format"
filter	=	"Filter"
filter_result_count	=	"{0} search results"
first_name	=	"First name"
forminvalid	=	"Some of your settings are invalid. Please enter them again."
from	=	"From"
general	=	"General"
icon_view	=	"Thumbnail view"
ie_32bit_suggestion	=	"Please use 32-bit Internet Explorer."
incompatible	=	"Incompatible"
initial_page	=	"Initial page"
invalid_name	=	"Invalid name format"
ip	=	"IP"
ip_address	=	"IP address"
item_existed	=	"The selected item(s) already exist(s)."
items	=	"item(s)"
java_install_failed_msg	=	"Failed to install Java applet. Please check whether your account is administrator or standard user with writing privilege."
java_installation	=	"Please install {@} 1.6 onward."
java_plugin_32bit_suggestion	=	"Failed to launch Java applet. Please check the settings of Java applet and your browser to make sure they are running in {0}-bit mode. Refer to Help for more information."
java_runtime_object_error	=	"A Java applet runtime error occurred. This may be caused by compatibility issues with Java version. Please refer to Help for more information."
keyword	=	"Keyword"
lang_changed	=	"Display language has been changed."
language	=	"Language"
language_ara	=	"العربية"
language_chs	=	"简体中文"
language_cht	=	"繁體中文"
language_csy	=	"Český"
language_dan	=	"Dansk"
language_enu	=	"English"
language_fre	=	"Français"
language_ger	=	"Deutsch"
language_hun	=	"Magyar"
language_ita	=	"Italiano"
language_jpn	=	"日本語"
language_krn	=	"한국어"
language_nld	=	"Nederlands"
language_nor	=	"Norsk"
language_plk	=	"Polski"
language_ptb	=	"Português do Brasil"
language_ptg	=	"Português Europeu"
language_rus	=	"Русский"
language_spn	=	"Español"
language_sve	=	"Svenska"
language_trk	=	"Türkçe"
last_name	=	"Last name"
list	=	"List"
list_view	=	"List View"
local_host	=	"Local host"
login	=	"Login"
logout	=	"Logout"
mac_address	=	"MAC address"
message	=	"Message"
messages	=	"Messages"
model	=	"Model"
msg_enable_plugin_suggestion	=	"Please enable Survillance Web Plugin in your browser to watch camera video."
msg_mpeg4_browser_suggestion	=	"The following browsers are recommended for watching MPEG-4 and H.264 videos: IE (32bit), Firefox and Chrome on Windows or Safari 6 on Mac OS X."
msg_waiting	=	"Processing. Please wait..."
never	=	"Never"
next_step	=	"Next"
next_x_pages	=	"Next {0} pages"
nitem_ddtext	=	"{0} item(s) selected"
no_description	=	"No description"
no_item_category_tip	=	"No items in this category."
no_search_result	=	"No match found."
non_rec_mode_msg	=	"Recording is stopped because the recording storage has been removed."
not_support	=	"Not Supported"
note	=	"Note"
notification	=	"Notification"
ntpdate_server	=	"Network time server"
number	=	"Number"
object_not_exist	=	"This item no longer exists."
objects	=	"Items"
occupied	=	"Occupied"
old_password	=	"Original Password"
paging_items	=	"item(s)"
password	=	"Password"
period	=	"."
photo_size_too_large	=	"This picture is larger than {0}. Please resize the image and try again."
pin	=	"PIN"
port	=	"Port"
pre_x_pages	=	"Previous {0} pages"
previous_step	=	"Previous"
recording_server	=	"Recording Server"
refresh_confirm	=	"The selected language will be applied after refreshing the webpage. Would you like to refresh the webpage now?"
reinstall_activeX_suggestion	=	"Files missing from the installation directory. Please disable the ActiveX add-on of Synology Inc. and log in to Surveillance Station again. Refer to Help for more information."
related_servers_conn_failed	=	"Failed to connect to some of the related servers."
report_bug	=	"Send feedback or report problems"
restore_default	=	"Restore Defaults"
schedule	=	"Schedule"
search	=	"Search"
search_results	=	"Search Results"
searching	=	"Searching"
searching2	=	"Searching..."
select_one	=	"Please select at least one entry."
select_server	=	"Please select a server."
serial_number	=	"Serial number"
server_name	=	"Server Name"
service	=	"Service"
service_unavailable_under_non_rec_mode	=	"This service is not available in non-recording mode."
setting	=	"Settings"
setting_applied	=	"Setting applied."
setting_nochange	=	"No settings were changed."
sever_conn_failed	=	"Failed to connect to the server [{0}]."
size_gb	=	"GB"
size_mb	=	"MB"
slave_ds	=	"Client"
source	=	"Source"
ss_site_description	=	"Synology Surveillance Station helps you manage and live view your IP cameras coupled with your DiskStation (NVR) anywhere anytime."
ss_site_keywords	=	"IP Cam,Security,Web Application"
status	=	"Status"
status_blocked	=	"Blocked"
status_deleted	=	"Deleted"
status_disabled	=	"Disabled"
status_disconnected	=	"Disconnected"
status_expired	=	"Expired"
status_normal	=	"Normal"
status_pass	=	"Pass"
status_unknown	=	"Unknown"
str_service_disabled	=	"The service is disabled now."
stream	=	"Stream"
surveillance_server	=	"Server"
surveillance_station	=	"Surveillance Station"
system	=	"System"
test_connection	=	"Test Connection"
time	=	"Time"
time_from	=	"From"
time_sync	=	"Time Synchronization"
time_to	=	"To"
time_zone	=	"Time zone"
timespan_decrease	=	"Increase timespan"
timespan_increase	=	"Decrease timespan"
to	=	"To"
too_many_items_selected	=	"Operation failed due to too many items selected."
trigger_alarm	=	"Alarm"
trigger_audio	=	"Audio Detection"
trigger_continue	=	"Continuous"
trigger_motion	=	"Motion Detection"
trigger_motion_and_alarm	=	"Motion Detection and Alarm"
trigger_tampering	=	"Tampering Detection"
unblock	=	"Unblock"
update_plugin_suggestion	=	"The existing plugin is not compatible with the version of your Surveillance Station. Please {0}download{1} and update."
upload_browse	=	"Browse"
uploading	=	"Uploading..."
user_account_disable	=	"Disable this account"
user_acnt_expired	=	"Expired"
user_acnt_expired_date	=	"Expires on "
user_disable_date	=	"After:"
user_disable_immediately	=	"Immediately"
user_info	=	"User Information"
user_photo	=	"Photo"
username	=	"User name"
value	=	"Value"
version	=	"Version"
view	=	"View"
warn_quickconnect_tunnel	=	"You are connecting to your DiskStation via the QuickConnect service, and the access performance might be affected. For better performance, we highly recommend you configure router port forwarding."
warning	=	"Warning"

[ss_filter]
add_camera	=	"New camera added"
alarm_triggered	=	"Alarm detected"
audio_detected	=	"Audio detected"
connection_lost	=	"Connection lost"
connection_resume	=	"Connection resumed"
del_camera	=	"Camera deleted"
motion_detected	=	"Motion detected"
motion_detected_alarm_triggered	=	"Motion detected and alarm detected"
notification_event_type	=	"Event Type"
recording_failed	=	"Recording failed"
rotation_limit_reached	=	"Archive limit reached"
slave_ds_added	=	"New server added"
slave_ds_deleted	=	"Server deleted"
snapshot_archive_limit_reached	=	"Snapshot archive limit reached"
tampering_detected	=	"Tampering detected"
vs_added	=	"New VisualStation added"
vs_connection_resumed	=	"Connection resumed"
vs_deleted	=	"VisualStation deleted"

[ss_generic_setting]
auth_key	=	"Authentication key"
auth_key_confirm	=	"Confirm authentication key"
auto_del_unrecog_cam	=	"Delete recordings of unrecognized cameras automatically"
centralized_enable	=	"Enabling central management system (CMS) allows you to manage multiple recording servers in Surveillance Station. This webpage will be refreshed. Are you sure you want to continue?"
centralized_slave	=	"Be a client"
change_from_rec_to_others_alert	=	"Changing from a recording server to other settings will unpair this server with the host server. Do you want to continue?"
def_port_range	=	"55736-55863"
default_port_range	=	"Use the default port range"
del_all_layout_confirm	=	"Some data and settings of recording servers on the CMS host will be removed after the change is applied. This webpage will be refreshed. Are you sure you want to continue?"
init_page_set	=	"Initial Page Setting"
init_page_set_desc	=	"Go to this page after logon"
manual_port_range	=	"Use the following port range"
nvr_enable_local_display	=	"Enable local display to perform security monitoring on a connected monitor"
nvr_enable_local_display_tip	=	"It is recommended to disable local display to provide best performance for Web clients"
nvr_local_display	=	"Local Display"
port_from	=	"From"
port_in_used	=	"This port number is reserved for system use only. Please enter a different number. Please refer to Help for reserved ports."
port_range	=	"MPEG4 Streaming Port"
port_to	=	"To"
rotate_unrecog_cam	=	"Rotate recordings of unrecognized cameras based on its archiving rule"
unrecog_cam_settings	=	"Unrecognized Camera Archiving Settings"
video_output_module	=	"Video Output Module"
visual_station_enable	=	"Enable VisualStation"

[ss_log]
cam_codec_activation_failed	=	"Certain functions of Camera [{0}] do not work properly because the given codec is not successfully activated. Please check your Internet connection."
camera_irrelative_log	=	"Non-camera related"
cfm_all_log_clear	=	"Are you sure to delete all logs?"
cfm_categ_filtered_log_clear	=	"All filtered logs in this category (total {0}) will be deleted. Do you want to continue?"
cfm_categ_log_clear	=	"All logs in this category (total {0}) will be deleted. Do you want to continue?"
cfm_filtered_log_clear	=	"All filtered logs (total {0}) will be deleted. Do you want to continue?"
clear_all	=	"Clear all"
clear_category	=	"Clear this category"
clear_filtered	=	"Clear filtered items"
clear_filtered_category	=	"Clear filtered items in this category"
codec_activation_succeed	=	"The given codec [{0}] is successfully activated."
description	=	"View and manage the logs."
download_all	=	"Download all"
download_category	=	"Download this category"
download_filtered	=	"Download filtered items"
download_filtered_category	=	"Download filtered items in this category"
edge_storage_download_finished	=	"Download of [{0}] recordings from camera [{1}] finished.​​​​"
log_clear	=	"Clear"
log_desc	=	"Event"
log_error	=	"Error"
log_information	=	"Information"
log_number	=	"Log number"
log_save	=	"Download"
log_time	=	"Date & Time"
log_title	=	"Surveillance Station Log"
log_type	=	"Type"
log_warning	=	"Warning"
msg_actionrule_add	=	"Action rule [{0}] was added."
msg_actionrule_delete	=	"Action rule [{0}] was deleted."
msg_actionrule_disabled	=	"Action rule [{0}] was disabled."
msg_actionrule_edit	=	"Action rule [{0}] [{1}] was changed to [{2}]."
msg_actionrule_edit_event	=	"[{1}] for action rule [{0}] was modified."
msg_actionrule_enable	=	"Action rule [{0}] was enabled."
msg_actionrule_rename	=	"Action rule [{0}] was renamed to [{1}]."
msg_addons_action	=	"Add-on [{0}] was {1}."
msg_audio_pattern_add	=	"Audio pattern [{0}] was added."
msg_audio_pattern_delete	=	"Audio pattern [{0}] was deleted."
msg_audio_pattern_modified	=	"Audio pattern [{0}] was modified."
msg_cam_conn_lost	=	"Connection to camera [{0}] was lost."
msg_cam_conn_recovered	=	"Connection to camera [{0}] was recovered."
msg_cam_conn_stream_error	=	"Stream content of camera [{0}] was incorrect."
msg_cam_conn_unauthorized	=	"Connection to camera [{0}] was unauthorized."
msg_cam_deleted	=	"Camera [{0}] was deleted."
msg_cam_disabled	=	"Camera [{0}] was disabled."
msg_cam_enabled	=	"Camera [{0}] was enabled."
msg_cam_grp_add	=	"A new camera group [{0}] was added."
msg_cam_grp_del	=	"Camera group [{0}] was deleted."
msg_cam_grp_edited	=	"Camera group [{0}] has been modified."
msg_cam_image_reso_error	=	"Image resolution of camera [{0}] was incorrect."
msg_cam_setting_change	=	"Setting [{0}] of camera [{1}] was changed to [{2}]."
msg_cms_clear_log_failed	=	"Failed to clear the logs of the recording server [{0}]."
msg_cms_del_recording_failed	=	"Failed to delete the recordings of the recording server [{0}]."
msg_cms_del_snapshot_failed	=	"Failed to delete the snapshots of the recording server [{0}]."
msg_cms_depart	=	"This recording server has been removed from CMS by [{0}]."
msg_cms_join	=	"This recording server has been added to CMS by [{0}]."
msg_cms_lock_recording_failed	=	"Failed to lock the recordings of the recording server [{0}]."
msg_cms_lock_snapshot_failed	=	"Failed to lock the snapshots of the recording server [{0}]."
msg_cms_serv_status	=	"The status of {0} [{1}] has changed to [{2}]."
msg_cms_unlock_recording_failed	=	"Failed to unlock the recordings of the recording server [{0}]."
msg_cms_unlock_snapshot_failed	=	"Failed to unlock the snapshot(s) of the recording server [{0}]."
msg_dev_added	=	"Recording server [{0}] was added."
msg_dev_deleted	=	"Recording server [{0}] was deleted."
msg_dev_disabled	=	"Recording server [{0}] was disabled."
msg_dev_enabled	=	"Recording server [{0}] was enabled."
msg_dev_lock	=	"Recording server [{0}] was locked."
msg_dev_resumed	=	"{0} [{1}] has resumed."
msg_dev_unlock	=	"Recording server [{0}] was unlocked."
msg_email_setting_change	=	"Email notification setting [{0}] was changed to [{1}]."
msg_emap_added	=	"A new e-map [{0}] was added."
msg_emap_del	=	"E-map [{0}] was deleted."
msg_emap_edited	=	"E-map [{0}] has been modified."
msg_event_del_multi	=	"[{0}] user selected events were deleted."
msg_event_delete	=	"Event [{0}] was deleted."
msg_filtered_log_clear	=	"All filtered logs were cleared."
msg_generic_setting_change	=	"Generic setting [{0}] was changed to [{1}]."
msg_license_add	=	"A new license key [{0}] was added."
msg_license_delete	=	"License key [{0}] was deleted."
msg_license_in_blacklist	=	"The license key in use [{0}] is blacklisted. If you feel this is an error, please contact the seller of this license key."
msg_log_clear	=	"Log file was cleared."
msg_log_exported	=	"Log file was exported."
msg_md_setting_change	=	"Option setting [{0}] of camera [{1}] was changed to [{2}]."
msg_migrate_in	=	"Camera [{0}] has been migrated in."
msg_migrate_out	=	"Camera [{0}] has been migrated out."
msg_new_camera_added	=	"A new camera [{0}] was added."
msg_notify_edit_setting	=	"The notification settings have been modified."
msg_out_of_storage	=	"Camera [{0}] failed to record due to insufficient storage."
msg_privprofile_add	=	"Privilege profile [{0}] was added."
msg_privprofile_authobj_modified	=	"Authorized [{0}] of privilege profile [{1}] has been modified."
msg_privprofile_delete	=	"Privilege profile [{0}] was deleted."
msg_privprofile_rename	=	"Privilege profile [{0}] was renamed to [{1}]."
msg_privprofile_setting_changed	=	"[{0}] of privilege profile [{1}] was changed to [{2}]."
msg_push_serv_setting_change	=	"Push service setting [{0}] was changed to [{1}]."
msg_restarted	=	"Surveillance Station is restarted."
msg_rotation_reach_datelimit	=	"Recordings of camera [{0}] reached date limit. [{1}] events was deleted."
msg_rotation_reach_sizelimit	=	"Recordings of camera [{0}] reached size limit. [{1}] events was deleted."
msg_rotation_reach_spacelimit	=	"Recordings of camera [{0}] reached space limit. [{1}] events was deleted."
msg_server_disable	=	"This recording server was disabled by [{0}]."
msg_server_edited	=	"This recording server has been modified by [{0}]."
msg_server_enable	=	"This recording server was enabled by [{0}]."
msg_server_lock	=	"This recording server was locked by [{0}]."
msg_server_unlock	=	"This recording server was unlocked by [{0}]."
msg_setting_changed	=	"Setting [{0}] of camera [{1}] was changed."
msg_sms_setting_change	=	"SMS notification setting [{0}] was changed to [{1}]."
msg_snapshot_del_selected	=	"[{0}] user selected snapshots were deleted."
msg_snapshot_delete	=	"Snapshot [{0}] was deleted."
msg_started	=	"Surveillance Station is started."
msg_stopped	=	"Surveillance Station is stopped."
msg_user_added	=	"User [{0}] was added."
msg_user_date	=	"Set the expiration date of user [{0}] to {1}."
msg_user_default_layout	=	"Layout [{0}] was set as the default layout for user [{1}]."
msg_user_deleted	=	"User [{0}] was deleted."
msg_user_disabled	=	"User [{0}] was disabled."
msg_user_edited	=	"User [{0}] has been modified."
msg_user_enabled	=	"User [{0}] was enabled."
msg_user_photo_modified	=	"[Photo] of user [{0}] has been modified."
msg_user_pw_changed	=	"[Password] of user [{0}] was changed."
msg_user_rename	=	"User [{0}] was renamed to [{1}]."
msg_user_report_exported	=	"User privilege report was exported."
msg_user_setting_changed	=	"[{0}] of user [{1}] was changed to [{2}]."
msg_vs_added	=	"A {0} [{1}] was added."
msg_vs_boot	=	"Started the {0} [{1}]."
msg_vs_deleted	=	"{0} [{1}] was deleted."
msg_vs_dhcp	=	"{0} [{1}] has obtained an IP [{2}] from DHCP server."
msg_vs_disabled	=	"{0} [{1}] was disabled."
msg_vs_disconnected	=	"{0} [{1}] has disconnected."
msg_vs_edited	=	"{0} [{1}] has been modified."
msg_vs_enabled	=	"{0} [{1}] was enabled."
msg_vs_fan_failed	=	"The fan on {0} [{1}] has failed."
msg_vs_locked	=	"{0} [{1}] was locked."
msg_vs_manual	=	"{0} [{1}] has manually changed its IP to [{2}]."
msg_vs_overheat	=	"The temperature of {0} [{1}] is too high. Please check your room temperature."
msg_vs_overheat_shutdown	=	"{0} [{1}] was shut down due to overheating."
msg_vs_paired	=	"Paired with {0} [{1}] successfully."
msg_vs_renamed	=	"{0} [{1}] has renamed to [{3}]."
msg_vs_resumed	=	"{0} [{1}] has resumed."
msg_vs_shutdown	=	"Shut down the {0} [{1}]."
msg_vs_status	=	"The status of {0} [{1}] has changed to [{2}]."
msg_vs_unlocked	=	"{0} [{1}] was unlocked."
msg_vs_upgraded	=	"{0} [{1}] has upgraded firmware to [{2}]."
msg_vs_usb_detected	=	"A USB drive is detected on {0} [{1}]."
rec_storage_installed	=	"Recording storage has been installed successfully, and the recording service is resumed."
rec_storage_removed	=	"Recording storage has been removed, and the recording service is stopped."
rec_storage_removed_alert	=	"Unable to view logs because the recording storage has been removed."
share_set_accessible	=	"Shared folder "surveillance" is now available for use. Recording services have resumed."
share_set_inaccessible	=	"Shared folder "surveillance" is not available for use. Recording services have stopped."
share_snapshot_create_after	=	"Snapshots for shared folder "surveillance" have been taken successfully. Recording services have resumed."
share_snapshot_create_before	=	"Snapshots for shared folder "surveillance" are about to be taken. Recording services have stopped."
share_snapshot_restored	=	"Shared folder "surveillance" has been restored to the chosen snapshot."

[ss_mail]
alert_test	=	"Send a test email"
alert_use_ssl	=	"Secure connection (SSL/TLS) is required"
auth_need	=	"Authentication required"
confirm_password	=	"Confirm password"
email_addr	=	"Email address"
fail_to_confirm_password	=	"Failed to confirm password. Please enter it again."
has_no_sys_mail	=	"You have not completed email notification settings at DSM > Control Panel. Notifications will be sent upon completion of the settings."
invalid_email	=	"Invalid email address."
invalid_port	=	"Invalid SMTP port number. The port must be between 0~65535."
invalid_smtp	=	"Invalid SMTP server."
mail_cancel	=	"Cancel"
mail_save	=	"Save"
mailnotify_enable	=	"Enable e-mail notifications"
no_mail	=	"Disable"
password	=	"Password"
primary_email	=	"Primary email"
secondary_email	=	"Secondary email"
send_email	=	"Email Notification"
smtp_need_auth	=	"SMTP authentication"
smtp_port	=	"SMTP port"
smtp_server	=	"SMTP server"
ss_mail	=	"Apply the following email information"
ssl_need	=	"This server requires a secure connection (SSL)"
sys_mail	=	"Apply email notification settings specified at DSM > Control Panel"
test_mail	=	"Send a test mail"
username	=	"Username"

[ss_notification]
SMS_alert_secondary_phone	=	"The secondary phone number you entered is incomplete."
access_denied	=	"Access denied"
access_granted	=	"Access granted"
advanced_desc	=	"Set up and manage event notifications."
alert_mail_verification_failed	=	"Verification mail failed to send. Please check your settings and try again."
alert_mail_verification_success	=	"A verification mail has been sent. Please follow the instructions inside to verify your email address."
alert_smtp_need_auth	=	"Authentication required"
allow_notify	=	"Allow Notification"
attach_snapshot	=	"Attach an event snapshot"
cam_conn_lost	=	"Camera connection lost"
cam_conn_resumed	=	"Camera connection resumed"
camera_default_schedule	=	"New camera default settings"
confirm_go_set_page	=	"The {0} service is not enabled. Do you want to go to the setup page now?"
controller_alarm_logged	=	"Controller alarm logged"
controller_casing_open	=	"Controller case opened"
device_added	=	"New device added"
device_conn_lost	=	"Device connection lost"
device_conn_resumed	=	"Device connection resumed"
device_deleted	=	"Device deleted"
door_alarm_detected	=	"Door alarm triggered"
door_conn_lost	=	"Door connection lost"
door_conn_resumed	=	"Door connection resumed"
door_tampering_detected	=	"Door tampering detected"
duplicate	=	"Duplicate"
edit_common_variable	=	"Edit Sender Name"
email_desc	=	"Enable email notification service to receive notification messages via email when status changes or errors occur to the system."
email_msg_interval_enable	=	"Enable email interval limit"
email_notification	=	"Email"
event	=	"Event"
event_notification	=	"Event Notification"
events	=	"Events"
failed_apply_to_camera	=	"Failed to apply the notification settings to the camera(s) {0}."
failed_apply_to_server	=	"Failed to apply the notification settings to the server(s) {0}."
failed_apply_to_vs	=	"Failed to apply the notification settings to VisualStation(s) {0}."
fan_failed	=	"Fan failed"
filter_apply_to_camera	=	"Please select cameras to apply the notification settings."
filter_apply_to_server	=	"Please select servers to apply the notification settings."
filter_apply_to_vs	=	"Please select VisualStations to apply the notification settings."
label_mail_server	=	"Email server"
label_push_mail_server	=	"Use email server hosted by Synology"
label_smtp_mail_server	=	"Use custom email server"
label_smtp_provider	=	"Service provider"
mail_recipient	=	"Recipients"
mail_subject_prefix	=	"Subject prefix"
mail_test_success	=	"A test email has been sent. If you do not receive an email, please make sure the settings are correct."
message_edit_desc	=	"Customize the subject and content of the notification below. SMS and push notifications will contain the subject only."
message_edit_hint	=	"The string segments containing "%" will be replaced with actual system information when the notification is sent."
module_desc	=	"Setup and manage notification service setting including Email, SMS and Push Service."
msg_content	=	"Content"
msg_min_interval	=	"Minimum interval between each message (minutes)"
msg_subject	=	"Subject"
no_noti_services_selected	=	"No notification services are selected."
note_change_lang	=	"You can change notification language settings at DSM > Control Panel > Regional Options > Language."
notification_filter	=	"Settings"
notification_schedule	=	"Notification Schedule"
notification_type	=	"Notification Type"
overheat	=	"VisualStation overheating"
push_mail_send_verify	=	"Send verification mail"
push_mail_server_desc	=	"Send notifications regarding system status via Synology's email server"
push_mail_verify_note	=	"The recipient {0} has not been verified."
pushservice_notification	=	"Push Service"
rec_server_conn_lost	=	"Recording server connection lost"
rec_server_conn_resumed	=	"Recording server connection resumed"
rec_storage_installed	=	"Recording storage installed"
rec_storage_removed	=	"Recording storage removed"
schedule_batch_edit	=	"Batch Edit"
schedule_cam_apply_to_default	=	"Apply to new camera default settings"
schedule_cam_apply_to_selected	=	"Apply to selected camera"
schedule_msg_no_sel_event	=	"Please select at least one notification event for the schedule to apply."
schedule_setting	=	"Settings"
schedule_slave_ds_apply_to_default	=	"Apply to new server default settings"
schedule_slave_ds_apply_to_selected	=	"Apply to selected server"
schedule_vs_apply_to_default	=	"Apply to new VisualStation default settings"
schedule_vs_apply_to_selected	=	"Apply to selected VisualStation"
schedule_wizard_schedule	=	"Please set up the notification schedule"
schedule_wizard_sel_cam	=	"Please select camera(s) for the schedule to apply"
schedule_wizard_sel_event	=	"Please select notification types and event types"
schedule_wizard_title	=	"Notification Batch Edit Wizard"
service	=	"Service"
sms_desc	=	"Enable SMS notification service to receive notification messages via SMS when status changes or errors occur to the system."
sms_notification	=	"SMS"
smtp_provider_163	=	"163 Mail"
smtp_provider_aol	=	"Aol."
smtp_provider_custom	=	"Custom SMTP server"
smtp_provider_gmail	=	"Gmail"
smtp_provider_outlook	=	"Outlook"
smtp_provider_qq	=	"QQ"
smtp_provider_yahoo	=	"Yahoo!"
smtp_sender_mail	=	"Sender email"
smtp_sender_mail_tip	=	"If blank, the first recipient's email address that you specified above will be used."
smtp_sender_name	=	"Sender name"
vs_conn_lost	=	"VisualStation connection lost"
vs_conn_resumed	=	"VisualStation connection resumed"
vs_default_schedule	=	"New VisualStation default settings"

[ss_privilege]
advanced_privilege	=	"Advanced Privileges"
all_cameras	=	"All cameras"
all_emaps	=	"All e-maps"
all_layouts	=	"All layouts"
all_priv_type	=	"All Privilege Types"
authorized	=	"Authorized"
camera_privilege	=	"Camera Privilege"
choose_existing_profile	=	"Choose an existing privilege profile"
create_new_profile	=	"Create a new privilege profile"
custom_profile	=	"Custom"
delete_recordings	=	"Delete recordings"
delete_snapshots	=	"Delete snapshots"
delete_tasks	=	"Delete tasks"
download_log	=	"Download logs"
download_snapshots	=	"Download snapshots"
download_tasks	=	"Download tasks"
download_video	=	"Download recordings"
edit_snapshot	=	"Edit snapshots"
edit_user	=	"Edit User"
edit_user_info	=	"Edit User Info"
edit_user_privilege	=	"Edit Privilege"
emap_header	=	"E-Maps"
emap_privilege	=	"E-Map Privilege"
error_apply_occupied	=	"Another user with administrative privilege is configuring the setting of this page. Please try again later."
error_nameused	=	"The user name already exists or is reserved for system use only. Please enter a different one."
error_noname	=	"No user name was entered."
exclude_username	=	"Exclude name and description of user from password"
failed_load_user	=	"Failed to load the user data."
generate_all	=	"For all categories"
generate_category_report	=	"Generate report for this category"
generate_report	=	"Generate Report"
generate_this_category	=	"For this category"
hide_unauthorized	=	"Hide Unauthorized"
included_numeric_char	=	"Include numeric characters"
included_special_char	=	"Include special characters"
information	=	"Profile Information"
layout	=	"Layout"
layout_privilege	=	"Layout Privilege"
lens_control	=	"Lens Control"
liveview_no_accessible_layout	=	"You have insufficient privileges to access any saved camera layouts. Please drag another IP camera or e-map here to see Live View in 1X1 layout."
lock_snapshots	=	"Lock snapshots"
lock_video	=	"Lock recordings"
menu_user_info	=	"User Info"
min_length_enable	=	"Minimal password length"
mixed_case	=	"Allow mixed case"
no_accessible_layout	=	"No accessible layouts."
no_authorized_advoper	=	"No authorized advanced operations."
no_authorized_camera	=	"No authorized cameras."
no_authorized_emap	=	"No authorized e-maps."
no_authorized_layout	=	"No authorized layouts."
no_authorized_snapshots	=	"Insufficient privilege to view snapshots."
no_camera_found	=	"No IP cameras available."
no_emap_found	=	"No e-maps available."
no_layout_found	=	"No layouts were found."
no_permission_play_video	=	"You do not have the privilege to play recordings. Please contact the administrator."
no_privilege_watch_liveview	=	"You do not have the privilege to watch the live view of this camera. Please contact the administrator."
no_such_user	=	"The user doesn't exist."
no_user_chosen	=	"No user is selected."
no_user_description	=	"No description"
num_user	=	"Number of Users"
passwd_strength_warn	=	"Stronger password is required. "
photo_del_confirm_msg	=	"The user's photo will be deleted. Do you want to continue?"
play_video	=	"Play recordings"
preview_remind	=	"Click "Preview" to check which objects this profile has been authorized to access."
priv_ptz_ctrl	=	"PTZ Control"
priviledge_item_tip	=	"Please {0}add{1} users to manage their privilege profiles."
privilege_account	=	"Account"
privilege_all_camera	=	"All"
privilege_apply_profile	=	"Apply a profile"
privilege_authorized_cameras	=	"Authorized Cameras"
privilege_confirm_modify	=	"This will modify your privilege type. Do you want to continue?"
privilege_manager	=	"Manager"
privilege_new_profile	=	"New profile"
privilege_no_access	=	"Account Disable"
privilege_profile	=	"Privilege Profile"
privilege_profile_alert_num_limit	=	"The maximum number of privilege profiles is {0}."
privilege_profile_all_cameras_managers	=	"All-Camera Manager"
privilege_profile_all_cameras_viewers	=	"All-Camera Spectator"
privilege_profile_all_obj_manager	=	"All-Object Manager"
privilege_profile_all_obj_spectator	=	"All-Object Spectator"
privilege_profile_apply_new	=	"Create new profile"
privilege_profile_confirm_delete	=	"Are you sure you want to delete the selected profile(s)?"
privilege_profile_content	=	"Profile content"
privilege_profile_description	=	"Setup and manage privilege profile."
privilege_profile_list_title	=	"Profile list"
privilege_profile_management	=	"Profile Management"
privilege_profile_name	=	"Profile name"
privilege_status	=	"Type"
privilege_type	=	"Privilege Type"
privilege_updated_reload	=	"Your privilege settings have been changed. The page will be refreshed."
privilege_viewer	=	"Spectator"
profile_multi_users_confirm_save	=	"Editing this privilege profile might affect other users. Are you sure you want to save this profile?"
profile_selection	=	"Select User Profile"
select_privilege_profile	=	"Select Privilege Profile"
show_log	=	"Show logs"
take_snapshot	=	"Take snapshots"
take_snapshot_liveview	=	"Take snapshots in live view"
take_snapshot_recording	=	"Take snapshots when playing back recordings"
timeline_no_accessible_layout	=	"You have insufficient privileges to access any saved camera layouts. Please drag another IP camera or recording here to see Timeline in 1X1 layout."
tooltip_user	=	"User(s)"
user_acnt_disabled	=	"Disabled"
user_acnt_expired	=	"Expired"
user_acnt_expired_date	=	"Expires on "
user_acnt_normal	=	"Normal"
user_acnt_unknow_status	=	"Unknown status"
user_add_wizard	=	"Add User Wizard"
user_cfrmrmv	=	"Are you sure you want to delete the following user(s)?"
user_creation_wizard	=	"User Creation Wizard"
user_delete_confirm	=	"I understand the user's home folder will be permanently removed and cannot be recovered."
user_description	=	"Setup and manage users."
user_info	=	"User Information"
user_photo	=	"Photo"
user_priv_report	=	"User Privilege Report"
user_report_advanced	=	"Advanced Operations"
user_report_camera	=	"IP Camera(s)"
user_report_emap	=	"E-Map(s)"
user_report_layout	=	"Layout(s)"
user_rm_home_warning	=	"When the account is deleted, the user's home folders would be deleted simultaneously. "
users_not_exist	=	"The users [{0}] do not exist."
view	=	"View"
view_snapshots	=	"View snapshots"

[ss_pushservice]
error_update_ds_info	=	"Failed to forward DiskStation information to push service server."
error_update_msn_account	=	"Failed to forward Windows Live Messenger account(s) to push service server."
error_update_skype_account	=	"Failed to forward Skype account(s) to push service server."
manage_mobile_device	=	"Manage paired devices"
mobile_ds_cam_version	=	"DS cam Version"
mobile_model	=	"Model Name"
mobile_version	=	"Firmware Version"
note_for_add_contact	=	"Please log in to your Windows Live Messenger/Skype to accept friend invitation from Synology to receive instant messaging notifications."
pushserv_test_success	=	"A test message has been sent. If you do not receive it, please check if the settings are correct."
pushservice_account_limit	=	"You can enter up to two accounts separated by ";"."
pushservice_account_num_exceed	=	"The number of accounts exceeds the limit."
pushservice_account_the_same	=	"Please do not enter duplicate accounts."
pushservice_desc	=	"Enable notification service to receive notification messages via mobile devices, Windows Live Messenger, and Skype when a notification event occurs."
pushservice_mobile	=	"Mobile"
pushservice_mobile_desc	=	"Enable mobile notification service to receive real-time notifications of the events you select at "Management" > "Notification" > "Settings"."
pushservice_mobile_enable	=	"Enable mobile device notifications"
pushservice_mobile_hint	=	"Please install and log in to DS cam on your mobile device to receive notifications."
pushservice_mobile_tip	=	"Enable notification service to receive notification messages via mobile devices when a notification event occurs."
pushservice_msn	=	"MSN"
pushservice_msn_account	=	"Windows Live Messenger account"
pushservice_msn_bot_name	=	"Paired Windows Live Messenger account"
pushservice_msn_desc	=	"Enable Windows Live Messenger notification service to receive real-time notifications of the events you select at "Management" > "Notification" > "Settings"."
pushservice_msn_enable	=	"Enable MSN notifications"
pushservice_skype	=	"Skype"
pushservice_skype_account	=	"Skype account"
pushservice_skype_bot_name	=	"Paired Skype account"
pushservice_skype_desc	=	"Enable Skype notification service to receive real-time notifications of the events you select at "Management" > "Notification" > "Settings"."
pushservice_skype_enable	=	"Enable Skype notifications"
pushservice_tip	=	"Enable notification service to receive notification messages via Synology's email server and mobile devices when a notification event occurs."
pushservice_unpair_all_mobile_device	=	"Unpair all"
pushservice_unpair_device	=	"Unpair"
send_test_notification	=	"Send a test message"
skype_account_rule	=	"Skype Name must have between 6 and 32 characters. It must start with a letter and can contain only letters, numbers, '.', ',' ,'-' and '_'."

[ss_sms]
api_id	=	"API ID"
confirm_delete_provider	=	"Are you sure you want to delete the settings of the selected SMS service provider?"
enter_nationcode	=	"Enter your country code"
has_no_sys_sms	=	"You have not completed SMS notification settings at DSM > Control Panel. Notifications will be sent upon completion of the settings."
invalid_url	=	"Invalid URL format."
msg_interval	=	"Minimum interval between each message (minutes)"
msg_interval_enable	=	"Enable SMS interval limit"
primary_phone	=	"Primary phone number"
provider_descript	=	"Provider description"
provider_edit	=	"Edit SMS service provider"
provider_name	=	"Provider name"
provider_new	=	"Add SMS service provider"
provider_param	=	"URL parameter definition"
provider_param_descript	=	"Select the corresponding category for each parameter"
provider_url	=	"SMS URL"
provider_url_descript	=	"Enter a SMS URL with the message content set to be "Hello world":"
provider_url_note	=	"This SMS URL is only for setup purposes. No SMS message will be sent after setup is completed. The format of this URL is provided by the SMS service provider, and the URL must include the following parameters: username, password, destination phone, and message content. Using Clickatell as an example, a possible URL is: https://api.clickatell.com/http/sendmsg?user=TestUser&password=TestPassword&api_id=3148203&to=886123456789&text=Hello+world. Please note that in "message content" parameter, the space between "Hello" and "world" will be replaced by the particular character defined by the service provider."
secondary_phone	=	"Secondary phone number"
sms_auth	=	"Authentication"
sms_provider	=	"SMS service provider"
sms_test_err	=	"SMS test has failed."
sms_test_success	=	"A SMS test message has been sent. If you do not receive a message, please make sure the settings are correct."
smsnotify_enable	=	"Enable SMS notifications"
ss_sms	=	"Apply the following SMS settings"
sys_sms	=	"Apply SMS notification settings specified at DSM > Control Panel"
sys_sms_not_enable	=	"Please enable SMS notification in DSM (at "Main Menu" > "Control Panel" > "Notification" > "SMS") and try again."
test_sms	=	"Send a test SMS message"
url_err_duplicated_type	=	"Each parameter category except "Other" can only be used once."
url_err_invalid_param	=	"Invalid URL parameters."
url_err_too_few_param	=	"You must enter at least 4 URL parameters."
url_err_too_many_param	=	"You can enter up to 10 URL parameters."
url_param_content	=	"Message content"
url_param_other	=	"Others"
url_param_phone	=	"Phone number"

[taskqueue]
cam_codec_activation_failed	=	"Certain functions of Camera ({0}) do not work properly because the given codec is not successfully activated. Please check your Internet connection."
clear_all	=	"Clear All "
codec_activation_failed	=	"Video or audio stream of Camera ({0}) does not play or display properly because the given codec is not successfully activated. Please check your Internet connection and enable the camera again."
edge_storage_schedule_edited	=	"[Edge storage schedule] of camera ({0}) was changed."
edge_storage_setting_changed	=	"Setting [Edge Storage] of camera ({0}) was changed to [{1}]."
edge_storage_task_deleted	=	"{0} [{1}] edge storage tasks of camera ({2}) were deleted."
edge_storage_task_manual	=	"{0} edge storage tasks of camera ({1}) were launched by user."
edge_storage_task_status_change	=	"The status of the edge storage download task of camera ({0}) was changed to [{1}]."
empty_text	=	"No notifications"
md_ss_codec_activation_failed	=	"Camera ({0}) does not work properly with motion detection by Surveillance Station because the given codec is not successfully activated. Please check your Internet connection and enable the camera again."
migrate_cam	=	"Migrate camera"
migrate_cam_content	=	"{0} camera(s) to {1}"
mountable_rec_dir_in_external_device	=	"There are recording folders on the external device. You can {0}mount{1} the folders to view the recording archives."
msg_cam_add_failed	=	"Failed to add a new camera."
msg_cam_conn_lost	=	"Camera ({0}) connection was lost."
msg_cam_conn_recovered	=	"Camera ({0}) connection was restored."
msg_cam_delete_failed	=	"Failed to delete camera ({0})."
msg_cam_deleted	=	"Camera ({0}) was deleted."
msg_cam_disable_failed	=	"Failed to disable camera ({0})."
msg_cam_disabled	=	"Camera ({0}) was disabled."
msg_cam_edit_failed	=	"Edit camera ({0}) failed."
msg_cam_edited	=	"Camera ({0}) has been modified."
msg_cam_enable_failed	=	"Failed to enable camera ({0})."
msg_cam_enabled	=	"Camera ({0}) was enabled."
msg_cms_clear_log_failed	=	"Failed to clear the logs of {0} ({1})."
msg_cms_del_recording_failed	=	"Failed to delete the recordings of {0} ({1})."
msg_cms_depart	=	"This recording server has been removed from CMS by [{0}]."
msg_cms_join	=	"This recording server has been added to CMS by [{0}]."
msg_cms_lock_recording_failed	=	"Failed to lock the recordings of {0} ({1})."
msg_cms_serv_status	=	"The status of {0} ({1}) has changed to [{2}]."
msg_cms_unlock_recording_failed	=	"Failed to unlock the recordings of {0} ({1})."
msg_dev_delete_failed	=	"Failed to delete recording server [{0}]."
msg_dev_disable_failed	=	"Failed to disable recording server [{0}]."
msg_dev_enable_failed	=	"Failed to enable recording server [{0}]."
msg_dev_lock_failed	=	"Failed to lock recording server [{0}]."
msg_dev_resumed	=	"Connection to recording server [{0}] has resumed."
msg_dev_unlock_failed	=	"Failed to unlock recording server [{0}]."
msg_emap_added	=	"A new e-map ({1}) was added to [{0}]."
msg_emap_del	=	"E-map ({1}) was deleted on [{0}]."
msg_emap_edited	=	"E-map ({1}) has been modified on [{0}]."
msg_filtered_log_clear	=	"Filtered logs were cleared on [{0}]."
msg_generic_setting_change	=	"The setting of [Central Management System] service on {0} ({1}) was changed to [{2}]."
msg_license_in_blacklist	=	"The license key in use [{0}] is blacklisted. If you feel this is an error, please contact the seller of this license key."
msg_log_clear	=	"Log files were cleared on [{0}]."
msg_migrate_in	=	"Camera ({0}) has been migrated in."
msg_migrate_out	=	"Camera ({0}) has been migrated out."
msg_new_camera_added	=	"A new camera ({0}) was added."
msg_notify_edit_service	=	"The notification service has been modified on [{0}]."
msg_notify_edit_setting	=	"The notification settings have been modified on [{0}]."
msg_server_disable	=	"This recording server was disabled by [{0}]."
msg_server_edited	=	"This recording server has been modified by [{0}]."
msg_server_enable	=	"This recording server was enabled by [{0}]."
msg_server_lock	=	"This recording server was locked by [{0}]."
msg_server_unlock	=	"This recording server was unlocked by [{0}]."
msg_user_added	=	"User ({1}) was added on [{0}]."
msg_user_date	=	"Set the expiration date of user ({1}) to {2} on [{0}]."
msg_user_deleted	=	"User ({1}) was deleted on [{0}]."
msg_user_disabled	=	"User ({1}) was disabled on [{0}]."
msg_user_edited	=	"User ({1}) has been modified on [{0}]."
msg_user_enabled	=	"User ({1}) was enabled on [{0}]."
msg_vs_add_failed	=	"Failed to add VisualStation {0} ({1}). Please make sure your VisualStation settings are correct."
msg_vs_added	=	"A {0} ({1}) was added."
msg_vs_deleted	=	"{0} ({1}) was deleted."
msg_vs_disabled	=	"{0} ({1}) was disabled."
msg_vs_disconnected	=	"{0} ({1}) has disconnected."
msg_vs_edit_failed	=	"Failed to edit settings of VisualStation {0} ({1})."
msg_vs_edited	=	"{0} ({1}) has been modified."
msg_vs_enabled	=	"{0} ({1}) was enabled."
msg_vs_fan_failed	=	"The fan on {0} ({1}) has failed."
msg_vs_overheat	=	"The temperature of {0} ({1}) is abnormally high."
msg_vs_overheat_shutdown	=	"{0} ({1}) has shut down due to overheating."
msg_vs_resumed	=	"{0} ({1}) has resumed."
msg_vs_status	=	"The status of {0} ({1}) has changed to [{2}]."
msg_vs_usb_detected	=	"A USB drive was detected on {0} ({1})."
rec_storage_installed	=	"Recording storage has been installed successfully, and the recording service is resumed."
rec_storage_removed	=	"Recording storage has been removed, and the recording service is stopped."
serv_auth_err	=	"Unauthorized"
serv_disconn	=	"Disconnected"
serv_occupied	=	"Occupied"
serv_unknown	=	"Unknown"
share_set_accessible	=	"Shared folder "surveillance" is now available for use. Recording services have resumed."
share_set_inaccessible	=	"Shared folder "surveillance" is not available for use. Recording services have stopped."
share_snapshot_create_after	=	"Snapshots for shared folder "surveillance" have been taken successfully. Recording services have resumed."
share_snapshot_create_before	=	"Snapshots for shared folder "surveillance" are about to be taken. Recording services have stopped."
share_snapshot_restored	=	"Shared folder "surveillance" has been restored to the chosen snapshot."
status_disconn	=	"Disconnected"
status_occupied	=	"Occupied"
status_unpaired	=	"Unpaired"
title	=	"Notifications"

[timezone]
Adelaide	=	"(GMT+09:30) Adelaide"
Alaska	=	"(GMT-09:00) Alaska Standard Time"
Almaty	=	"(GMT+06:00) Almaty, Astana"
Amman	=	"(GMT+02:00) Amman"
Amsterdam	=	"(GMT+01:00) Amsterdam, Berlin, Rome, Stockholm, Vienna"
Arizona	=	"(GMT-07:00) Arizona"
Athens	=	"(GMT+02:00) Athens, Bucharest, Istanbul"
Atlantic	=	"(GMT-04:00) Atlantic Time (Canada)"
Auckland	=	"(GMT+12:00) Auckland, Wellington"
Azores	=	"(GMT-01:00) Azores Standard Time"
Baghdad	=	"(GMT+03:00) Baghdad"
Baku	=	"(GMT+04:00) Baku"
Beijing	=	"(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi"
Beirut	=	"(GMT+02:00) Beirut"
Belgrade	=	"(GMT+01:00) Belgrade, Bratislava, Budapest, Prague"
Bogota	=	"(GMT-05:00) Bogota, Lima, Quito, Rio Branco"
Brasilia	=	"(GMT-03:00) Brasilia"
Brisbane	=	"(GMT+10:00) Brisbane"
Brussels	=	"(GMT+01:00) Brussels, Copenhagen, Madrid, Paris"
BuenosAires	=	"(GMT-03:00) Buenos Aires, Georgetown"
CAT	=	"(GMT+02:00) Central Africa Time"
Calcutta	=	"(GMT+05:30) Bombay, Calcutta, Madras, New Delhi, Colombo"
CapeVerde	=	"(GMT-01:00) Cape Verde Is."
Caracas	=	"(GMT-04:30) Caracas"
Casablanc	=	"(GMT) Casablanca"
Central	=	"(GMT-06:00) Central Time (US & Canada)"
Chihuahua	=	"(GMT-07:00) Chihuahua, Mazatlan"
Darwin	=	"(GMT+09:30) Darwin"
Dhaka	=	"(GMT+06:00) Dhaka"
Dublin	=	"(GMT) Dublin, Edinburgh, Lisbon, London"
EET	=	"(GMT+02:00) Eastern Europe Standard Time"
EastIndiana	=	"(GMT-05:00) Indiana (East)"
Eastern	=	"(GMT-05:00) Eastern Time (US & Canada)"
Egypt	=	"(GMT+02:00) Egypt Standard Time; Cairo"
Ekaterinburg	=	"(GMT+06:00) Ekaterinburg"
Fiji	=	"(GMT+12:00) Fiji, Kamchatka, Marshall Is."
GMT+1	=	"(GMT+01:00) Western & Central Europe"
GMT+2	=	"(GMT+02:00) Eastern Europe Standard Time"
GMT-2	=	"(GMT-02:00) Mid-Atlantic Standard Time"
GMT-3	=	"(GMT-03:00) Brasilia"
Godthab	=	"(GMT-03:00) Greenland Standard Time; Nuuk(Godthab)"
Guam	=	"(GMT+10:00) Guam, Port Moresby"
Guatemala	=	"(GMT-06:00) Central America Standard Time; Guatemala"
Harare	=	"(GMT+02:00) Harare, Pretoria"
Hawaii	=	"(GMT-10:00) Hawaii Standard Time"
Helsinki	=	"(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius"
Irkutsk	=	"(GMT+09:00) Irkutsk"
Israel	=	"(GMT+02:00) Israel Standard Time; Jerusalem"
Jakarta	=	"(GMT+07:00) Bangkok, Hanoi, Jakarta"
Kabul	=	"(GMT+04:30) Afghanistan Standard Time; Kabul"
Karachi	=	"(GMT+05:00) Karachi, Islamabad, Tashkent"
Katmandu	=	"(GMT+05:45) Kathmandu"
Krasnoyarsk	=	"(GMT+08:00) Krasnoyarsk"
Kuwait	=	"(GMT+03:00) Kuwait, Riyadh"
Kwajalein	=	"(GMT-12:00) Eniwetok, Kwajalein"
La_Paz	=	"(GMT-04:00) La Paz"
Magadan	=	"(GMT+12:00) Magadan, Solomon Is., New Caledonia"
Manaus	=	"(GMT-04:00) Manaus"
Melbourne	=	"(GMT+10:00) Melbourne, Sydney, Canberra"
MexicoCity	=	"(GMT-06:00) Mexico City; Tegucigalpa"
Midway	=	"(GMT-11:00) Samoa Standard Time; Midway Is."
Minsk	=	"(GMT+03:00) Minsk"
Monrovia	=	"(GMT) Monrovia, Reykjavik"
Montevideo	=	"(GMT-03:00) Montevideo"
Moscow	=	"(GMT+04:00) Moscow, St. Petersburg, Kazan, Volgograd"
Mountain	=	"(GMT-07:00) Mountain Time (US & Canada)"
Muscat	=	"(GMT+04:00) Abu Dhabi, Muscat"
Nairobi	=	"(GMT+03:00) Nairobi"
Newfoundland	=	"(GMT-03:30) Newfoundland"
Noumea	=	"(GMT+11:00) New Caledonia"
Novosibirsk	=	"(GMT+07:00) Novosibirsk"
Pacific	=	"(GMT-08:00) Pacific Time (US & Canada); Tijuana"
Perth	=	"(GMT+08:00) Perth"
Rangoon	=	"(GMT+06:30) Yangon(Rangoon)"
Santiago	=	"(GMT-04:00) Santiago"
Sarajevo	=	"(GMT+01:00) Sarajevo, Skopie, Warsaw, Zagreb"
Saskatchewan	=	"(GMT-06:00) Saskatchewan"
Seoul	=	"(GMT+09:00) Seoul"
Singapore	=	"(GMT+08:00) Kuala Lumpur, Singapore"
South_Georgia	=	"(GMT-02:00) Mid-Atlantic Standard Time"
Taipei	=	"(GMT+08:00) Taipei"
Tasmania	=	"(GMT+10:00) Tasmania Standard Time; Hobart"
Tbilisi	=	"(GMT+04:00) Tbilisi"
Tehran	=	"(GMT+03:30) Iran Standard Time; Tehran"
Tokyo	=	"(GMT+09:00) Tokyo, Osaka, Sapporo"
Ulaanbaatar	=	"(GMT+08:00) Ulaanbaatar"
Vladivostok	=	"(GMT+11:00) Vladivostok"
WAT	=	"(GMT+01:00) Western Africa Time"
Windhoek	=	"(GMT+01:00) Windhoek"
Yakutsk	=	"(GMT+10:00) Yakutsk"
Yerevan	=	"(GMT+04:00) Yerevan"

[uicommon]
desktop	=	"Desktop"
err_creating_volume	=	"Processing volume settings. Please try again later when it's finished."
err_processing_share_setting	=	"Processing shared folder settings. Please try again later."
error_demo	=	"This function is not available in the demo mode."
error_noprivilege	=	"You are not authorized to use this service."
error_occupied	=	"Another package is being configured or installed. Please try again later."
error_relogin	=	"You have signed in on another computer. Please log in again."
error_system	=	"The operation failed."
error_timeout	=	"Connection expired. Please login again."
error_unauth	=	"You have logged in and out of DSM using another web browser, or DiskStation has been restarted. Please log in to DSM again."
logout	=	"Logout"
msg_waiting	=	"Processing. Please wait..."
poweroff_opt	=	"Shutdown"
reboot_opt	=	"Restart"
reboot_warn	=	"Are you sure you want to restart?"
shutdown_warn	=	"Are you sure you want to shutdown?"
system_poweroff	=	"_DISKSTATION_ is powered off."
system_reboot	=	"_DISKSTATION_ is rebooting."
system_reboot_timeout	=	"_DISKSTATION_ is restarting. After the restarting process is complete, use Synology Assistant to search and connect to _DISKSTATION_."
welcome	=	"Welcome"

[uninstall]
wizard_rm_checked	=	"Remove all recordings and settings on Surveillance Station"
wizard_rm_desc	=	"System settings, recording files and logs will be removed after the Surveillance Station package is uninstalled."
wizard_rm_keep_recordings_logs	=	"Keep recording files and logs"
wizard_rm_keep_system	=	"Keep system settings"
wizard_rm_title	=	"Remove Surveillance Station"

[visualstation]
CPU_temperature	=	"Thermal status"
add_vs	=	"Add VisualStation Wizard"
afterPageText	=	"of {0}"
alert_delete_last_layout	=	"You must keep at least one layout."
attention	=	"Attention"
basic_info	=	"Basic information"
beforePageText	=	"Page"
beforePageText_	=	"Page"
camera_setting	=	"Camera Settings"
channel_1	=	"Ch1"
channel_2	=	"Ch2"
channel_3	=	"Ch3"
channel_4	=	"Ch4"
channel_5	=	"Ch5"
channel_6	=	"Ch6"
confirm_delete_layout	=	"Are you sure you want to delete the selected layout?"
confirm_delete_vs	=	"Are you sure you want to delete the selected VisualStation?"
conn_err_msg	=	"Failed to connect to VisualStation. Please check the IP address and try again."
current_version	=	"Current version"
default	=	"Default"
description	=	"Setup and manage VisualStation."
detail_info	=	"Information"
device_info	=	"Information"
device_name	=	"Device name"
disable_comment	=	"{0} has been disabled on the paired Synology server. To enable {0} again, please go to Surveillance Station."
disconnected_step1	=	"Check if your network cable is properly connected, and then restart {0} and the paired Synology server."
displaypage	=	"Displaying {0} - {1} of {2}"
download_failed	=	"Failed to download."
download_failed_no_dot	=	"Failed to download"
download_warn	=	"You have reached the max concurrent downloads. Please wait and try again later."
edit_liveview	=	"Edit Live View"
edit_vs	=	"Edit Settings"
enable_jumbo_frame	=	"Enable Jumbo Frame"
enter_device_name	=	"Enter the name of your VS240HD and its network settings"
error_file_not_exist	=	"File does not exist."
event_downloading	=	"The file {0} ({1}{2}) will be downloaded to your USB drive. Do you want to continue?"
extended_screen	=	"Extended Screen"
failed_to_save	=	"Failed to save file(s)."
fan_error	=	"The fan of your {0} {1} has failed. Please contact your local retailer for assistance."
fan_status	=	"Fan status"
firmware_instruction	=	"Firmware Upgrade Instructions"
firmware_not_found	=	"Cannot find firmware in USB device"
firmware_upgrade_step1	=	"Download the latest firmware from www.synology.com"
firmware_upgrade_step2	=	"Store it onto a USB drive"
firmware_upgrade_step3	=	"Plug the USB drive into {0}"
firmware_upgrade_step4	=	"Click <b>Scan</b>"
firmware_upgrade_step5	=	"Click <b>Upgrade</b> to begin"
firmware_version	=	"Firmware version"
firstpage	=	"First Page"
fix_aspect_ratio	=	"Fixed aspect ratio"
full_screen	=	"Full Screen"
incompatible	=	"The VisualStation is incompatible due to incompatible firmware version or unsupported model."
incompatible_model	=	"This VisualStation model is not supported."
incompatible_version	=	"The VisualStation firmware version installed is incompatible. Please update to the newest version."
interrupt_downloading	=	"Your download will be interrupted. Do you want to continue?"
invalid_device_name	=	"Invalid device name format"
invalid_ip	=	"Invalid IP address"
ip_status	=	"IP status"
lable_layout	=	"Number of channels per monitor"
lang_display	=	"Display language"
lang_display_title	=	"Display Language"
lastpage	=	"Last Page"
layout	=	"Layout"
layout_management	=	"Edit Layout"
layout_setting_tips	=	"* Drag the cameras and place it on the layout."
link_status	=	"Network status"
lock_hint	=	"Lock VisualStation to prevent unauthorized users from changing your settings."
lock_setting	=	"Lock Setting"
lock_status	=	"Lock"
lock_vs	=	"Lock me (Recommended)"
log_downloading	=	"{0} logs will be downloaded to your USB drive. Do you want to continue?"
main_screen	=	"Main Screen"
message	=	"Notifications"
model_name	=	"Model name"
msg_waiting	=	"Please wait..."
mtu_value	=	"MTU value"
network	=	"Network"
network_setting	=	"Network Settings"
new_vs	=	"Add VisualStation"
nextpage	=	"Next Page"
no_vs_found	=	"No VisualStations were found."
no_vs_tip	=	"Please {0}add{1} VisualStations to start using this live-view solution."
ntpdate_server	=	"Network time server"
operating_time	=	"Operating time"
operation_prohibited	=	"The selection contains incompatible VisualStation(s) that prevent this operation from being performed."
overheating_shutdown	=	"{0} {1} shut down due to overheating."
paired_server	=	"Paired server"
paired_server_ip	=	"Paired server IP"
paired_server_title	=	"Paired Server"
poweroff_opt	=	"Shutdown"
prevpage	=	"Previous Page"
refresh	=	"Refresh"
same_as_main_screen	=	"Sync with main screen"
save_snapshot	=	"Do you want to save the snapshot?"
scan	=	"Scan"
security_lock	=	"Security Lock"
serial_number	=	"Serial number"
server_intr	=	"Enter a name to identify the VisualStation."
server_name	=	"Server Name"
server_name_low	=	"Server name"
set_layout_default	=	"Set as default"
shutdown_warn	=	"Are you sure you want to shutdown?"
shutting_down	=	"System is shutting down"
status_abnormal	=	"Abnormal"
status_day	=	"day(s)"
status_normal	=	"Normal"
status_time	=	"Time"
suggest_upgrade	=	"Please upgrade VisualStation to the latest version before enabling it in Surveillance Station."
system_settings	=	"System Settings"
tcpip_dhcp	=	"Get network configuration automatically (DHCP)"
tcpip_gateway	=	"Default gateway"
tcpip_ipaddr	=	"IP address"
tcpip_lan	=	"LAN"
tcpip_manual	=	"Use manual configuration"
tcpip_mask	=	"Subnet mask"
temperature	=	"Temperature"
temperature_high	=	"The temperature of {0} {1} is too high. Please check the room temperature."
test_vs	=	"Test Connection"
time_zone	=	"Time zone"
time_zone_title	=	"Time Zone"
today	=	"Today"
unlock_vs	=	"Unlock me"
unpair_step1	=	"Pair {0} with any Synology server on the same LAN by going to <b>Surveillance Station</b> > <b>Management</b> > <b>Device</b> > <b>VisualStation</b>."
unsupport_video	=	"The video format or resolution of this camera is unsupported."
upgrade_fail	=	"Oops... something went wrong during the firmware upgrade. Check the firmware source and try again."
upgrade_ss	=	"Please update Surveillance Station to the latest version to enable this function"
upgrade_step1	=	"Extracting the file..."
upgrade_step2	=	"Updating the system..."
upgrade_step3	=	"Rebooting the system. Please wait..."
usb_space_not_enough	=	"There is insufficient space on your USB drive."
vs_firmware	=	"Firmware"
vs_has_been_added	=	"This VisualStation already exists and cannot be added."
vs_has_been_locked	=	"This VisualStation is locked and cannot be added. Please unlock it first."
vs_locked	=	"Locked"
vs_locked_message	=	"{0} {1} has been locked to {2}."
vs_model	=	"Model"
vs_pairing	=	"Pairing..."
vs_search_result	=	"Search Results"
vs_status_configuring	=	"Configuring"
vs_status_locked	=	"This VisualStation is locked to the paired Synology server."
vs_status_unpaired	=	"Reset"
vs_unlocked	=	"Unlocked"
vs_unlocked_message	=	"{0} {1} has been unlocked."
vs_unpaired	=	"Unpaired"
vs_upgrade	=	"Upgrade"
vs_version	=	"Version"
warning_plug_usb	=	"Please plug the USB drive into {0} first."

[vtype]
bad_alias	=	"The alias you entered is invalid."
bad_ddns_noip_alphanumspace	=	"alphanumeric and space only"
bad_ddns_noip_password	=	"Character +,?,%,& are not allowed."
bad_domain_name	=	"Invalid domain name"
bad_email	=	"Invalid email format."
bad_field	=	"Field value is invalid."
bad_groupname	=	"The group name is invalid or contains invalid characters."
bad_host	=	"The server name you entered is invalid, please refer to Help for more information."
bad_hostname	=	"Invalid hostname format."
bad_ip	=	"The IP address you entered is invalid."
bad_iporhostname	=	"Invalid IP or hostname."
bad_iscsi_lunname	=	"The iSCSI LUN name you entered is invalid, please refer to Help for more information. "
bad_iscsi_password	=	"Numbers and English letters only. 12 to 16 characters."
bad_iscsi_targetiqn	=	"The iSCSI Target IQN you entered is invalid, please refer to Help for more information."
bad_iscsi_targetname	=	"The target name you entered is invalid, please refer to Help for more information."
bad_iscsi_username	=	"Numbers and English letters only. Maximum of 12 characters."
bad_mask	=	"The subnet mask you entered is invalid."
bad_networkgroupname	=	"The workgroup name is invalid or contains invalid characters."
bad_number	=	"Number cannot start with 0"
bad_port	=	"The port number should be from 1 to 65535."
bad_relay_alias_name	=	"The customized ID can only contain alphanumeric characters, "-", and "_", and cannot start with a digit."
bad_sharename	=	"The shared folder name is invalid or it contains invalid characters."
bad_url	=	"Invalid URL format."
bad_username	=	"The user name is invalid or it contains invalid characters."
password_confirm_failed	=	"Failed to confirm password. Please enter it again."

[watermark]
LANG_CHS	=	"简体中文"
LANG_CHT	=	"繁體中文"
LANG_CSY	=	"Český"
LANG_DAN	=	"Dansk"
LANG_DEU	=	"Deutsch"
LANG_ENU	=	"English"
LANG_ESN	=	"Español"
LANG_FRA	=	"Français"
LANG_HUN	=	"Magyar"
LANG_ITA	=	"Italiano"
LANG_JPN	=	"日本語"
LANG_KRN	=	"한국어"
LANG_NLD	=	"Nederlands"
LANG_NOR	=	"Norsk"
LANG_PLK	=	"Polski"
LANG_PTB	=	"Português do Brasil"
LANG_PTG	=	"Português Europeu"
LANG_RUS	=	"Русский"
LANG_SVE	=	"Svenska"
LANG_TRK	=	"Türkçe"
LANG_default	=	"System default"
about	=	"About"
about_content	=	"Copyright (c) %1 Synology Inc.  All rights reserved."
about_title	=	"About Synology Evidence Integrity Authenticator"
about_version	=	"Version"
header_dsserial	=	"DiskStation Serial Number"
header_endtime	=	"Stop Time"
header_filename	=	"File Name"
header_starttime	=	"Start Time"
header_status	=	"Authentication Result"
help	=	"Help"
main_window_title	=	"Synology Evidence Integrity Authenticator"
openfile_select	=	"Images and Videos"
openfile_tip	=	"Open File(s)"
openfile_title	=	"Open File(s)"
openfolder_tip	=	"Open Folder"
openfolder_title	=	"Open Folder"
removefile_tip	=	"Remove File(s)"
setting	=	"Preferences"
status_fail	=	"Authentication failed"
status_pass	=	"Authentication succeeded"
status_processing	=	"Processing"
statusbar_totalfile	=	"Total files"

