
[SS6_AddCamera]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has been added
Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has been successfully added. You can start to use this camera by logging in to Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_AlarmTriggered]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has started alarm recording

Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has been triggered by alarm signals at %EVENT_TIME% to start alarm recording. You can watch the event by visiting "Recording" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_AlarmTriggeredOrMotionDetected]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has detected motion and started alarm recording
Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has detected motion and been triggered by alarm signals at %EVENT_TIME% to start alarm recording. You can watch the event by visiting "Recording" under the "Management" tab in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_CameraAudioDetected]
Subject: %SS_PKG_NAME% has detected audio
Dear user,

%SS_PKG_NAME% has detected audio from the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS6_CameraConnectionLost]
Subject: %SS_PKG_NAME% lost connection to camera(s)
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost the connection to the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS6_CameraConnectionResumed]
Subject: Connection to cameras on %SS_PKG_NAME% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS6_CameraRecordingFailed]
Subject: Failed to record/save videos on %SS_PKG_NAME%
Dear user,

The following camera(s) on %SS_PKG_NAME% cannot record/save videos: %CAMERA%.

%SS_PKG_NAME%
Sincerely,


[SS6_CameraTamperingDetected]
Subject: %SS_PKG_NAME% has detected tampering
Dear user,

%SS_PKG_NAME% has detected tampering on the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS6_ControllerAlarmLogged]
Subject: Door controllers on %SS_PKG_NAME% has logged alarms
Dear user,

The following door controller(s) on %SS_PKG_NAME% have logged alarms: %CONTROLLER%.

Sincerely,
%SS_PKG_NAME%


[SS6_ControllerCasingOpen]
Subject: %SS_PKG_NAME% has detected the opening of door controllers' cases
Dear user,

%SS_PKG_NAME% has detected the opening of the case of the following door controller(s): %CONTROLLER%.

Sincerely,
%SS_PKG_NAME%


[SS6_DeleteCamera]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has been deleted
Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has been deleted from "Camera List" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_DeviceAdded]
Subject: %DEVICE_TYPE% devices have been added to %SS_PKG_NAME%
Dear user,

The following %DEVICE_TYPE% device(s) have been added to %SS_PKG_NAME%: %DEVICE_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_DeviceDeleted]
Subject: %DEVICE_TYPE% devices have been removed from %SS_PKG_NAME%
Dear user,

The following %DEVICE_TYPE% device(s) have been removed from %SS_PKG_NAME%: %DEVICE_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorAccessDenied]
Subject: Access to doors on %SS_PKG_NAME% was denied
Dear user,

Access to the following door(s) on %SS_PKG_NAME% was denied: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorAccessGranted]
Subject: Access to doors on %SS_PKG_NAME% was granted
Dear user,

Access to the following door(s) on %SS_PKG_NAME% was granted: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorAlarmDetected]
Subject: Alarms were triggered from the doors on %SS_PKG_NAME%
Dear user,

Alarms were triggered from the following door(s) on %SS_PKG_NAME%: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorConnLost]
Subject: Doors on %SS_PKG_NAME% were disconnected
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost the connection to the following door(s): %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorConnResumed]
Subject: Doors on %SS_PKG_NAME% have been reconnected
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has restored connection to the following door(s): %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_DoorTamperingDetected]
Subject: Doors on %SS_PKG_NAME% have detected tampering
Dear user,

The following door(s) on %SS_PKG_NAME% have detected tampering: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent01]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent02]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent03]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent04]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent05]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent06]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent07]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent08]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent09]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_ExternalEvent10]
Subject: %SS_PKG_NAME% has detected external events
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_MotionDetected]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has detected motion
Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has detected motion at %EVENT_TIME%. You can watch the event by visiting "Recording" under the "Management" tab in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_RecStorageInstalled]
Subject: Recording storage on %SS_PKG_NAME% has been set up
Dear user,

Recording storage on %SS_HOSTNAME% has been installed, and the corresponding services have been provided again.

Sincerely,
%SS_PKG_NAME%


[SS6_RecStorageRemoved]
Subject: Recording storage on %SS_PKG_NAME% has been removed
Dear user,

Recording storage on %SS_HOSTNAME% has been removed, and the corresponding services were stopped. Please take action to fix this issue.

Sincerely,
%SS_PKG_NAME%


[SS6_RotationLimitReached]
Subject: %SS_PKG_NAME% has started archive rotation
Dear user,

According to your archive rotation settings, %SS_PKG_NAME% has started archive rotation for the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS6_SlaveDsAdded]
Subject: Recording Server %SLAVEDS% on %SS_HOSTNAME% has been added
Dear user,

Recording Server %SLAVEDS% on %SS_HOSTNAME% has been successfully added. You can start to use this recording server by logging in to Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_SlaveDsConnectionLost]
Subject: %SS_PKG_NAME% has lost connection to recording servers
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following recording server(s): %SLAVEDS%.

Sincerely,
%SS_PKG_NAME%


[SS6_SlaveDsConnectionResumed]
Subject: Connection to recording servers on %SS_PKG_NAME% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following recording server(s): %SLAVEDS%.

Sincerely,
%SS_PKG_NAME%


[SS6_SlaveDsDeleted]
Subject: Recording Server %SLAVEDS% on %SS_HOSTNAME% has been deleted
Dear user,

Recording Server %SLAVEDS% on %SS_HOSTNAME% has been deleted from "Server" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_SnapshotArchiveLimitReached]
Subject: %SS_PKG_NAME% has started snapshot archive rotation
Dear user,

According to your snapshot archive rotation settings, %SS_HOSTNAME% has started snapshot archive rotation.

Sincerely,
%SS_PKG_NAME%


[SS6_TestMail]
Subject: Test message from Synology Surveillance Station on %SS_HOSTNAME%
Dear user,

Congratulations! You have successfully set up the email notification in Surveillance Station on %SS_HOSTNAME%.

Sincerely,
%SS_PKG_NAME%


[SS6_VSAdded]
Subject: VisualStation %VS% on %SS_HOSTNAME% has been added
Dear user,

VisualStation %VS% on %SS_HOSTNAME% has been successfully added. You can start to use this VisualStation by logging in to Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_VSConnectionLost]
Subject: %SS_PKG_NAME% has lost connection to VisualStation devices
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following VisualStation device(s): %VS%.

Sincerely,
%SS_PKG_NAME%


[SS6_VSConnectionResumed]
Subject: Connection to VisualStation devices on %SS_PKG_NAME% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following VisualStation device(s): %VS%.

Sincerely,
%SS_PKG_NAME%


[SS6_VSDeleted]
Subject: VisualStation %VS% on %SS_HOSTNAME% has been deleted
Dear user,

VisualStation %VS% on %SS_HOSTNAME% has been deleted from "VisualStation" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS6_VSFanFailed]
Subject: The fan of VisualStation devices on %SS_PKG_NAME% has failed
Dear user,

%SS_PKG_NAME% has detected the failure of fan in the following VisualStation devices: %VS%.

Sincerely,
%SS_PKG_NAME%


[SS6_VSOverheat]
Subject: %SS_PKG_NAME% has detected overheating in VisualStation devices
Dear user,

%SS_PKG_NAME% has detected overheating in the following VisualStation devices: %VS%.

Sincerely,
%SS_PKG_NAME%


[SS7_IOModuleConnectionLost]
Subject: %SS_PKG_NAME% has lost connection to I/O modules
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following I/O module(s): %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS7_IOModuleConnectionResumed]
Subject: Connection to I/O modules on %SS_PKG_NAME% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following I/O module(s): %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS7_IOModuleDITriggered]
Subject: %SS_PKG_NAME% has detected digital input signals

Dear user,

%SS_PKG_NAME% has detected digital input signals %IOPORT% from the following I/O modules: %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS_AddCamera]
Subject: Camera %CAMERA% on %HOSTNAME% has been added
Dear user,

Camera %CAMERA% on %HOSTNAME% has been successfully added. You can start to use this camera by logging in to Surveillance Station.

Sincerely,
%COMPANY_NAME%


[SS_AlarmTriggered]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has detected alarm signal %ALARM_IDX%

Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has been triggered by alarm signals %ALARM_IDX% at %EVENT_TIME% to start alarm recording. You can watch the event by visiting "Recording" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS_AlarmTriggeredOrMotionDetected]
Subject: Camera %CAMERA% on %SS_HOSTNAME% has detected motion and started alarm recording
Dear user,

Camera %CAMERA% on %SS_HOSTNAME% has detected motion and been triggered by alarm signals %ALARM_IDX% at %EVENT_TIME% to start alarm recording. You can watch the event by visiting "Recording" in Surveillance Station.

Sincerely,
%SS_PKG_NAME%


[SS_ArchTaskTooSlow]
Subject: Archiving task on %SS_PKG_NAME% running too slow
Dear user,

Archiving task %TASK_NAME% on %SS_PKG_NAME% is running too slow. Please check if the network connection is normal and make sure bandwidth settings are correct.

Sincerely,
%SS_PKG_NAME%


[SS_ArchTaskTooSlow_Name]
Subject: Archiving task %TASK_NAME% running too slow
Dear user,

Archiving task %TASK_NAME% on %SS_PKG_NAME% is running too slow. Please check if the network connection is normal and make sure bandwidth settings are correct.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveFileCompleted]
Subject: %SS_PKG_NAME% has completed archiving files

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has completed archiving %FILES% recording files.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveNoSpace]
Subject: %SS_PKG_NAME% archiving task has insufficient storage space

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has insufficient storage space.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveNoSpace_Dev]
Subject: %SS_PKG_NAME% archiving task has insufficient storage space

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has insufficient storage space.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveNoSpace_Name]
Subject: Archiving task %TASK_NAME% has insufficient storage space
Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has insufficient storage space.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveRotateFile]
Subject: Archiving task has started rotation

Dear user,

According to your archive rotation settings, archiving task %TASK_NAME% has started rotating %FILES% recording files. The oldest files, except locked files, will be removed.

Sincerely,
%COMPANY_NAME%


[SS_ArchiveRotateFile_Name]
Subject: Archiving task %TASK_NAME% has started rotation
Dear user,

According to your archive rotation settings, archiving task %TASK_NAME% has started rotating %FILES% recording files. The oldest files, except locked files, will be removed.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveServerDisconn]
Subject: %SS_PKG_NAME% archiving task has lost connection to source recording server

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has lost connection to the source recording server.

Sincerely,
%SS_PKG_NAME%"


[SS_ArchiveServerDisconn_Name]
Subject: Archiving task %TASK_NAME% has lost connection to source recording server
Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has lost connection to the source recording server.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveServerResume]
Subject: Archiving task connection to source recording servers on %SS_PKG_NAME% has resumed

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has been reconnected to the source recording server.

Sincerely,
%SS_PKG_NAME%


[SS_ArchiveServerResume_Name]
Subject: Archiving task %TASK_NAME% connection to source recording servers was resumed
Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has been reconnected to the source recording server.

Sincerely,
%SS_PKG_NAME%


[SS_CameraAppDetected]
Subject: %SS_PKG_NAME% has detected ACAP events from camera
Dear user,

%SS_PKG_NAME% has detected ACAP events (%EVENT_NAME%) from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraAppDetected_Name]
Subject: Camera %CAMERA% has detected ACAP event
Dear user,

%SS_PKG_NAME% has detected ACAP events (%EVENT_NAME%) from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraAppVMDDetected]
Subject: %SS_PKG_NAME% has detected ACAP VMD events from camera
Dear user,

%SS_PKG_NAME% has detected ACAP VMD events (%EVENT_NAME%) from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraAppVMDDetected_Name]
Subject: Camera %CAMERA% has detected ACAP VMD event
Dear user,

%SS_PKG_NAME% has detected ACAP VMD events (%EVENT_NAME%) from the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraAudioDetected_Name]
Subject: Camera %CAMERA% has detected audio
Dear user,

%SS_PKG_NAME% has detected audio from the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraConnectionLost]
Subject: Connection to Camera %CAMERA% on %HOSTNAME% has been lost
Dear user,

The connection between Camera %CAMERA% and %HOSTNAME% has been lost, and hence the corresponding services have been stopped. Please take corrective action.

Sincerely,
%COMPANY_NAME%


[SS_CameraConnectionLost_Name]
Subject: Connection to camera %CAMERA% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost the connection to the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraConnectionResumed]
Subject: Connection to Camera %CAMERA% on %HOSTNAME% has been resumed
Dear user,

The connection between Camera %CAMERA% and %HOSTNAME% has been resumed, and the corresponding services have been provided again.

Sincerely,
%COMPANY_NAME%


[SS_CameraConnectionResumed_Name]
Subject: Connection to camera %CAMERA% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraPirDetected]
Subject: %SS_PKG_NAME% has detected PIR motion
Dear user,

%SS_PKG_NAME% has detected PIR motion on the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraPirDetected_Name]
Subject: Camera %CAMERA% has detected PIR motion
Dear user,

%SS_PKG_NAME% has detected PIR motion on the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_CameraRecordingFailed]
Subject: Camera %CAMERA% on %HOSTNAME% cannot record/save videos
Dear user,

Camera %CAMERA% on %HOSTNAME% cannot record or save videos. Please check if the connection to the camera is normal and if there is enough space to save the recorded videos. If the answer is yes but the problem persists, please restart your Synology NAS.

Sincerely,
%COMPANY_NAME%


[SS_CameraTamperingDetected_Name]
Subject: Camera %CAMERA% has detected tampering
Dear user,

%SS_PKG_NAME% has detected tampering on the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_ClientConnectionLost]
Subject: Connection to client %CLIENT_NAME% has been lost
Dear user,

%SS_PKG_NAME% has lost connection to the following client: %CLIENT_NAME% (%IP_ADDRESS%).

Sincerely,
%SS_PKG_NAME%


[SS_ClientLogout]
Subject: Client %CLIENT_NAME% has logged out

The following client has logged out: %CLIENT_NAME% (%IP_ADDRESS%).

Sincerely,
%SS_PKG_NAME%


[SS_CompletedArchTask]
Subject: %SS_PKG_NAME% has completed archiving task

Dear user,

%SS_PKG_NAME% has completed following archiving task: %TASK_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_CompletedArchTask_Name]
Subject: Archiving task %TASK_NAME% has archived recordings
Dear user,

%SS_PKG_NAME% has completed the following archiving task: %TASK_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_ControllerAlarmLogged_Name]
Subject: Door Controller %CONTROLLER% has logged alarms
Dear user,

The following door controller(s) on %SS_PKG_NAME% has logged alarms: %CONTROLLER%.

Sincerely,
%SS_PKG_NAME%


[SS_ControllerCasingOpen_Name]
Subject: Door Controller %CONTROLLER% has detected the opening of the door controller case
Dear user,

%SS_PKG_NAME% has detected the opening of the case of the following door controller(s): %CONTROLLER%.

Sincerely,
%SS_PKG_NAME%


[SS_DITriggered]
Subject: %SS_PKG_NAME% has detected digital input signals

Dear user,

%SS_PKG_NAME% has detected digital input signals %IOPORT% from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_DITriggered_Name]
Subject: Camera %CAMERA% has detected digital input signals
Dear user,

%SS_PKG_NAME% has detected digital input signals %IOPORT% from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_DailyArchivedFile]
Subject: Archiving task %TASK_NAME% has archived recordings

Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has archived %FILES% recording files.

Sincerely,
%SS_PKG_NAME%


[SS_DailyArchivedFile_Name]
Subject: Archiving task %TASK_NAME% has completed
Dear user,

%SS_PKG_NAME% archiving task %TASK_NAME% has archived %FILES% recording files.

Sincerely,
%SS_PKG_NAME%


[SS_DeleteCamera]
Subject: Camera %CAMERA% on %HOSTNAME% has been deleted
Dear user,

Camera %CAMERA% on %HOSTNAME% has been deleted from "Camera List" in Surveillance Station.

Sincerely,
%COMPANY_NAME%


[SS_DeviceAdded_Name]
Subject: %DEVICE_TYPE% %DEVICE_NAME% has been added
Dear user,

The following %DEVICE_TYPE% device(s) has been added to %SS_PKG_NAME%: %DEVICE_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_DeviceDeleted_Name]
Subject: %DEVICE_TYPE% %DEVICE_NAME% has been removed
Dear user,

The following %DEVICE_TYPE% device(s) has been removed from %SS_PKG_NAME%: %DEVICE_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorAccessDenied_Name]
Subject: Access to door %DOOR% was denied
Dear user,

Access to the following door(s) on %SS_PKG_NAME% was denied: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorAccessGranted_Name]
Subject: Access to door %DOOR% was granted
Dear user,

Access to the following door(s) on %SS_PKG_NAME% was granted: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorAlarmDetected_Name]
Subject: Alarms were triggered by door %DOOR%
Dear user,

Alarms were triggered by the following door(s) on %SS_PKG_NAME%: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorConnLost_Name]
Subject: Connection to door %DOOR% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost the connection to the following door(s): %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorConnResumed_Name]
Subject: Connection to door %DOOR% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has restored the connection to the following door(s): %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_DoorTamperingDetected_Name]
Subject: Door %DOOR% has detected tampering
Dear user,

The following door(s) on %SS_PKG_NAME% has detected tampering: %DOOR%.

Sincerely,
%SS_PKG_NAME%


[SS_ExtDITriggered]
Subject: %SS_PKG_NAME% has detected external digital input signals

Dear user,

%SS_PKG_NAME% has detected external digital input signals %IOPORT% from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_ExtDITriggered_Name]
Subject: Camera %CAMERA% has detected external digital input signals
Dear user,

%SS_PKG_NAME% has detected external digital input signals %IOPORT% from the following cameras: %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_ExternalEvent_Name]
Subject: External event %EVENT_NAME% has been detected
Dear user,

%SS_PKG_NAME% has detected the following external event(s): %EVENT_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverFinished]
Subject: %SS_PKG_NAME% finished failback
Dear user,

The recording servers %SLAVEDS% finished failback from the failover servers %FAILOVER_DS%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverFinished_Name]
Subject: Recording server %SLAVEDS% finished failback
Dear user,

The recording servers %SLAVEDS% finished failback from the failover servers %FAILOVER_DS%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverRecoverFailed]
Subject: %SS_PKG_NAME% has failed to rocver
Dear user,

Following recording server(s) %SLAVEDS% has failed to recover from failover server(s) %FAILOVER_DS%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverRecoverStarted]
Subject: %SS_PKG_NAME% started restoring recordings
Dear user,

Recording servers %SLAVEDS% started failback with recordings from the failover servers %FAILOVER_DS%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverRecoverStarted_Name]
Subject: Recording server %SLAVEDS% started restoring recordings
Dear user,

Recording servers %SLAVEDS% started failback and recording restoration from the failover servers %FAILOVER_DS%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverRecoverStopped]
Subject: %SS_PKG_NAME% was manually stopped from recording restoration
Dear user,

Recording restoration of recording servers %SLAVEDS% from the failover servers %FAILOVER_DS% was manually stopped.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverRecoverStopped_Name]
Subject: Recording server %SLAVEDS% was manually stopped from recording restoration
Dear user,

Recording restoration of recording servers %SLAVEDS% from the failover servers %FAILOVER_DS% was manually stopped.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverStarted]
Subject: %SS_PKG_NAME% started failover
Dear user,

Recording servers %SLAVEDS% started failover to the failover servers %FAILOVER_DS% because to %FAILOVER_REASON%.

Sincerely,
%SS_PKG_NAME%


[SS_FailoverStarted_Name]
Subject: Recording server %SLAVEDS% started failover
Dear user,

Recording servers %SLAVEDS% started failover to the failover servers %FAILOVER_DS% because of %FAILOVER_REASON%.

Sincerely,
%SS_PKG_NAME%


[SS_HomeModeEnter]
Subject: System enters Home Mode

Dear user,

System is now in Home Mode.

Sincerely,
%SS_PKG_NAME%


[SS_HomeModeEnterDetailed]
Subject: System enters Home Mode

Dear user,

System is now in Home Mode due to %HOME_MODE_REASON%, triggered by %HOME_MODE_USER%.

Sincerely,
%SS_PKG_NAME%


[SS_HomeModeLeave]
Subject: System leaves Home Mode

Dear user,

System has left Home Mode.

Sincerely,
%SS_PKG_NAME%


[SS_HomeModeLeaveDetailed]
Subject: System leaves Home Mode

Dear user,

System has left Home Mode due to %HOME_MODE_REASON%, triggered by %HOME_MODE_USER%.

Sincerely,
%SS_PKG_NAME%


[SS_HomeModeSettingChanged]
Subject: Home Mode settings have been changed

Dear user,

Home Mode settings have been changed. You can check the latest setting by visiting "Home Mode" app in %SS_PKG_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_IOModuleConnectionLost_Name]
Subject: Connection to I/O module %IOMODULE% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following I/O module(s): %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS_IOModuleConnectionResumed_Name]
Subject: Connection to I/O module %IOMODULE% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following I/O module(s): %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS_IOModuleDITriggered_Name]
Subject: I/O module %IOMODULE% has detected digital input signals from IO Port %IOPORT%
Dear user,

%SS_PKG_NAME% has detected digital input signals %IOPORT% from the following I/O modules: %IOMODULE%.

Sincerely,
%SS_PKG_NAME%


[SS_IPSpeakerConnectionLost]
Subject: %SS_PKG_NAME% has lost connection to speakers
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following speaker(s): %IPSPEAKER%.

Sincerely,
%SS_PKG_NAME%


[SS_IPSpeakerConnectionLost_Name]
Subject: Connection to IP speaker %IPSPEAKER% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following speaker(s): %IPSPEAKER%.

Sincerely,
%SS_PKG_NAME%


[SS_IPSpeakerConnectionResumed]
Subject: Connection to speakers on %SS_PKG_NAME% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following speaker(s): %IPSPEAKER%.

Sincerely,
%SS_PKG_NAME%


[SS_IPSpeakerConnectionResumed_Name]
Subject: Connection to IP speaker %IPSPEAKER% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following speaker(s): %IPSPEAKER%.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomAccessDetected]
Subject: %SS_PKG_NAME% has detected door access event
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected door access event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomAccessDetected_Name]
Subject: Intercom %CAMERA% has detected door access event
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected door access event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomDoorbellDetected]
Subject: %SS_PKG_NAME% has detected doorbell event

Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected doorbell event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomDoorbellDetected_Name]
Subject: Intercom %CAMERA% has detected doorbell event. 
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected doorbell event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomLockDetected]
Subject: %SS_PKG_NAME% has detected door lock event
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected door lock event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomLockDetected_Name]
Subject: Intercom %CAMERA% has detected door lock event
Dear user,
 
Intercom %CAMERA% on %SS_PKG_NAME% has detected door lock event.
 
Sincerely,
%SS_PKG_NAME%


[SS_IntercomRexDetected]
Subject: %SS_PKG_NAME% has detected REX button event
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected REX button event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomRexDetected_Name]
Subject: Intercom %CAMERA% has detected REX button event
Dear user,
 
Intercom %CAMERA% on %SS_PKG_NAME% has detected REX button event.
 
Sincerely,
%SS_PKG_NAME%


[SS_IntercomUnlockDetected]
Subject: %SS_PKG_NAME% has detected door unlock event
Dear user,

Intercom %CAMERA% on %SS_PKG_NAME% has detected door unlock event.

Sincerely,
%SS_PKG_NAME%


[SS_IntercomUnlockDetected_Name]
Subject: Intercom %CAMERA% has detected door unlock event
Dear user,
 
Intercom %CAMERA% on %SS_PKG_NAME% has detected door unlock event.
 
Sincerely,
%SS_PKG_NAME%


[SS_MotionDetected]
Subject: %SS_PKG_NAME% has detected motion from cameras
Dear user,

%SS_PKG_NAME% has detected motion from the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_MotionDetected_Name]
Subject: Camera %CAMERA% has detected motion
Dear user,

%SS_PKG_NAME% has detected motion from the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_POSNewTransaction]
Subject: %SS_PKG_NAME% has finished transactions
Dear user,

Transaction device %DEVICE% on %SS_PKG_NAME% has finished a transaction at %EVENT_TIME%. You can go to Transactions in Surveillance Station to view the recording.

Sincerely,
%SS_PKG_NAME%


[SS_POSNewTransaction_Name]
Subject: Transaction device %DEVICE% has finished a transaction
Dear user,

Transaction device %DEVICE% on %SS_HOSTNAME% has finished a transaction at %EVENT_TIME%. You go to Transactions in Surveillance Station to view the recording.

Sincerely,
%SS_PKG_NAME%


[SS_POSUserDefinedEvent]
Subject: %SS_PKG_NAME% has detected user-defined events
Dear user,

Transaction device %DEVICE% on %SS_PKG_NAME% has detected a user-defined event "%EVENT_NAME%" at %EVENT_TIME%. You can go to Transactions in Surveillance Station to view the recording.

Sincerely,
%SS_PKG_NAME%


[SS_POSUserDefinedEvent_Name]
Subject: Transaction device %DEVICE% has detected a user-defined event
Dear user,

Transaction device %DEVICE% on %SS_HOSTNAME% has detected a user-defined event "%EVENT_NAME%" at %EVENT_TIME%. You can go to Transactions in Surveillance Station to view the recording.

Sincerely,
%SS_PKG_NAME%


[SS_RotationLimitReached]
Subject: Camera %CAMERA% on %HOSTNAME% has started archive rotation
Dear user,

According to your archive rotation settings, Camera %CAMERA% on %HOSTNAME% has started archive rotation. The oldest files will be removed, except the locked files.

Sincerely,
%COMPANY_NAME%


[SS_RotationLimitReached_Name]
Subject: Camera %CAMERA% has started archive rotation
Dear user,

According to your archive rotation settings, %SS_PKG_NAME% has started archive rotation for the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_SlaveDsConnectionLost_Name]
Subject: Connection to recording server %SLAVEDS% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following recording server(s): %SLAVEDS%.

Sincerely,
%SS_PKG_NAME%


[SS_SlaveDsConnectionResumed_Name]
Subject: Connection to recording server %SLAVEDS% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following recording server(s): %SLAVEDS%.

Sincerely,
%SS_PKG_NAME%


[SS_StopArchivingLimitReached]
Subject: %SS_PKG_NAME% has stopped archiving
Dear user,

The task has reached time and storage limit. According to your archive rotation settings, %SS_PKG_NAME% has stopped archiving for the following task(s): %TASK_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_StopArchivingLimitReached_Name]
Subject: Archiving task %TASK_NAME% has stopped archiving
Dear user,

The task has reached time and storage limit. According to your archive rotation settings, %SS_PKG_NAME% has stopped archiving for the following task(s): %TASK_NAME%.

Sincerely,
%SS_PKG_NAME%


[SS_StopRecLimitReached]
Subject: %SS_PKG_NAME% has stopped recording
Dear user,

According to your archive rotation settings, %SS_PKG_NAME% has stopped recording for the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_StopRecLimitReached_Name]
Subject: Camera %CAMERA% has stopped recording
Dear user,

According to your archive rotation settings, %SS_PKG_NAME% has stopped recording for the following camera(s): %CAMERA%.

Sincerely,
%SS_PKG_NAME%


[SS_TestMail]
Subject: Test message from Synology Surveillance Station on %HOSTNAME%
Dear user,

Congratulations! You have successfully set up the email notification in Surveillance Station on %HOSTNAME%.

Sincerely,
%COMPANY_NAME%


[SS_VSAdded]
Subject: VisualStation %VS% on %HOSTNAME% has been added
Dear user,

VisualStation %VS% on %HOSTNAME% has been successfully added. You can start to use this VisualStation by logging in to Surveillance Station.

Sincerely,
%COMPANY_NAME%


[SS_VSConnectionLost]
Subject: Connection to VisualStation %VS% on %HOSTNAME% has been lost
Dear user,

The connection between VisualStation %VS% and %HOSTNAME% has been lost, and hence the corresponding services have been stopped. Please take corrective action.

Sincerely,
%COMPANY_NAME%


[SS_VSConnectionLost_Name]
Subject: Connection to VisualStation %VS% has been lost
Dear user,

Corresponding services have been stopped as %SS_PKG_NAME% has lost connection to the following VisualStation device(s): %VS%.

Sincerely,
%SS_PKG_NAME%


[SS_VSConnectionResumed]
Subject: Connection to VisualStation %VS% on %HOSTNAME% has been resumed
Dear user,

The connection between VisualStation %VS% and %HOSTNAME% has been resumed, and the corresponding services have been provided again.

Sincerely,
%COMPANY_NAME%


[SS_VSConnectionResumed_Name]
Subject: Connection to VisualStation %VS% was resumed
Dear user,

Corresponding services have been resumed as %SS_PKG_NAME% has been reconnected to the following VisualStation device(s): %VS%.

Sincerely,
%SS_PKG_NAME%


[SS_VSDeleted]
Subject: VisualStation %VS% on %HOSTNAME% has been deleted
Dear user,

VisualStation %VS% on %HOSTNAME% has been deleted from "VisualStation" in Surveillance Station.

Sincerely,
%COMPANY_NAME%


[SS_VSFanFailed_Name]
Subject: The fan of VisualStation %VS% has failed
Dear user,

%SS_PKG_NAME% has detected the failure of fan in the following VisualStation devices: %VS%.

Sincerely,
%SS_PKG_NAME%


[SS_VSOverheat_Name]
Subject: VisualStation %VS% has detected overheating
Dear user,

%SS_PKG_NAME% has detected overheating in the following VisualStation devices: %VS%.

Sincerely,
%SS_PKG_NAME%


[SS_VideoAnalyticsDetected]
Subject: %SS_PKG_NAME% has detected Deep Video Analytics events from camera

%SS_PKG_NAME% has detected Deep Video Analytics events (%EVENT_NAME%) from the following cameras: %CAMERA%.

Sent from your %SS_PKG_NAME%


[SS_VideoAnalyticsNoSpace]
Subject: Deep Video Analytics has insufficient storage

Dear user,

Deep Video Analytics on %SS_PKG_NAME% has insufficient storage.

Sincerely,
%SS_PKG_NAME%


[SS_VideoAnalyticsPeopleReachLimit]
Subject: Deep Video Analytics task %TASK_NAME% has reached the max limit of staying people count

Dear user,

Deep Video Analytics task %TASK_NAME% on %SS_PKG_NAME% has reached the max limit of staying people count.

Sincerely,
%SS_PKG_NAME%


[SS_VideoAnalyticsRotateDetectionResults]
Subject: Deep Video Analytics has start to rotate detection results
Dear user,

According to your archive rotation settings, Deep Video Analytics has start to rotate %FILES% detection results. The system will start to delete the detection results from the least recent to the most recent, but excluding the locked detection results.

Sincerely,
%SS_PKG_NAME%


[SS_VideoAnalyticsRuleTriggered]
Subject: Deep Video Analytics task %TASK_NAME% triggered the rule
Dear user,

Deep Video Analytics task %TASK_NAME% on %SS_PKG_NAME% triggered the following rule: %RULE_NAME%。.

Sincerely,
%SS_PKG_NAME%


[SS_VideoAnalyticsTampering]
Subject: Deep Video Analytics task %TASK_NAME% has detected tampering

Dear user,

Deep Video Analytics task %TASK_NAME% on %SS_PKG_NAME% has detected tampering.

Sincerely,
%SS_PKG_NAME%

