2000 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

IEEE Journal of Lightwave Technology
Volume 18 Number 8, August 2000

Table of Contents for this issue

Complete paper in PDF format

A Composite Optical Waveguide-Based Polarimetric Interferometer for Chemical and Biological Sensing Applications

Zhi-mei Qi, Kiminori Itoh, Member, OSA Masayuki Murabayashi and Hiroyuki Yanagi

Page 1106.

Abstract:

A new polarimetric interferometer has been developed on the basis of the phase difference between transverse electric (TE)0 and transverse magnetic (TM)0 modes in a composite optical waveguide (OWG). The composite OWG consists of a single-mode potassium ion-exchanged planar waveguide overlaid with a high-index thin film that has two tapered ends and supports only the TE0 mode. Applying tapered velocity coupling theory, we found that the TE0 and TM0 modes coexisting in the potassium ion-exchanged layer were separated in the thin film region of the composite OWG: the TE0 mode was coupled into the thin film while the TM0 mode was confined in the potassium ion-exchanged layer. Interference occurs between TE-and TM-polarized output components when a single output beam is passed through a 45°-polarized analyzer. The phase difference between both orthogonal output components is very sensitive to the superstrate index nc in the thin film region. Our experimental results indicate that a slight change of nc = 3.71 × 10-6 results in the phase-difference variation of = 1° for a 5-mm-long TiO2/K+ composite OWG with a 34-nm-thick TiO 2 film. Such a simple polarimetric interferometer can be applied to chemical or biological sensors by modifying the upper film surface of the composite OWG with a chemically or biologically active substance.

References

  1. K. Itob and M. Murabayashi, "Applications of optical waveguide techniques to surface monitoring,"in Trends in Physical Chemistry,: India: Council of Scientific Research Integration, Research Trends, 1991, pp.  179-187. 
  2. R. Klein and E. Voges, "Integrated-optic ammonia sensor", Sensors Actuators B, vol. 11, pp.  221-225, 1993.
  3. L. Yang and S. Scott Saavedra, "Chemical sensing using sol-gel derived planar waveguides and indicator phases", Anal. Chem., vol. 67, pp.  1307-1314,  1995.
  4. W. Budach, A. P. Abel, E. Bruno and D. Neuschafer, "Planar waveguide as high-performance sensing platforms for fluorescence-based multiplexed oligonucleotide hybridization assays", Anal. Chem., vol. 71, pp.  3347-3355, 1999.
  5. K. Itoh and M. Madou, "Optical waveguide for surface spectroscopy: FePO4 thin-film/K+ -doped glass composite optical waveguide systems having tapered velocity couplers", J. Appl. Phys., vol. 69, no. 11, pp.  7425-7429, 1991.
  6. X.-M. Chen, D.-K. Oing, K. Itoh and M. Murabayashi, "A TiO2 film/K+ ion-exchanged glass composite optical waveguide and its application to a refractive index sensor", Opt. Rev. , vol. 3, no. 5, pp.  351-355, 1996.
  7. Z.-m. Qi, K. Itoh, M. Murabayashi and H. Yanagi, "A novel optical waveguide interferometer: Application to biosensor", in Meeting Abstr., The 1999 Joint Int. Meeting, vol. 99-2, HI, Oct. 17-22 1999, p.  1973. 
  8. "Handbook of Chemistry: Fundamental Part II", 3rd ed., 1984 (in Japanese). pp. 555.
  9. A. A. Boiarski, R. W. Ridgway, J. R. Busch, G. Turhan-Sayan and L. S. Miller, "Integrated optical biosensor for environmental monitoring", SPIE Chem., Biochem., Environ. Fiber Sensors III, vol. 1587, pp.  114-128, 1991.