1998 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
IEEE Transactions on Antennas and Propagation
Volume 46 Number 11, November 1998
Page 1622.
Abstract:
Three methods for determining the penetration through small apertures in closed conducting surfaces are outlined and their salient features discussed. These methods are designated: 1) the scatterer method; 2) the short-circuit current method; and 3) the equivalent current method. They are implemented by integral equation techniques but are amenable to differential equation or hybrid methods. Procedures for applying each method are outlined as are schemes for repairing singular equations rendered invalid by the presence of false resonances. Reasons for inaccuracies in the three methods are also delineated. Data determined for a given structure by all three methods are presented and numerical examples that illustrate important features of the methods and their relative accuracies are described. In Part 1, the TE (to cylinder axis) case is presented. In this part of the paper is found an outline of the integral equation formulation and numerical scheme needed to accurately determine the field that penetrates through a slot in a conducting cylinder, excited by an axially independent TM source.
References