1998 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

IEEE Transactions on Antennas and Propagation
Volume 46 Number 12, December 1998

Table of Contents for this issue

Complete paper in PDF format

Novel Solutions to Low-Frequency Problems with Geometrically Designed Beam-Waveguide Systems

William A. Imbriale, Fellow, IEEE, M. S. Esquivel, and F. Manshadi

Page 1790.

Abstract:

The poor low-frequency performance of geometrically designed beam-waveguide antennas is shown to be caused by the diffraction phase centers being far from the geometrical optics mirror foci, resulting in substantial spillover and defocusing loss. Two novel solutions are proposed: 1) reposition the mirrors to focus low frequencies and redesign the high frequencies to utilize the new mirror positions and 2) redesign the input feed system to provide an optimum solution for the low frequency. A novel use of the conjugate phase-matching technique is utilized to design the optimum low-frequency feed system and the new feed system has been implemented in the Jet Propulsion Laboratory (JPL) Research and Development beam-waveguide (BWG) as part of a dual S/X-band feed system. The new S-band feed system is shown to perform significantly better than the original geometrically designed system.

References

  1. M. Mizusawa and T. Kitsuregawa, "A beam-waveguide feed having a symmetric beam for cassegrain antennas," IEEE Trans. Antennas Propagat., vol. AP-21, pp. 844-846, Nov. 1973.
  2. T. Veruttipong, J. R. Withington, V. Galindo-Israel, W. A. Imbriale, and D. Bathker, "Design considerations for beam-waveguide in the NASA deep space network," IEEE Trans. Antennas Propagat., vol. 36, pp. 1779-1787, Dec. 1988.
  3. T. Veruttipong, W. Imbriale, and D. Bathker, "Design and performance analysis of the new NASA beam-waveguide antenna," in Nat. Radio Sci. Meet., Boulder, CO, Jan. 1990, p. 59.
  4. --, "Design and performance analysis of the DSS-13 beam-waveguide antenna," Telecommun. Data Acquisition Progress Rep. 42-101, Jet Propulsion Lab., California Inst. Technol., May 1990, pp. 99-113.
  5. S. Rengarajan, V. Galindo-Israel, and W. Imbriale, "A study of amplitude and phase shaping effects in beam-waveguides," in IEEE Antennas Propagat. Soc. Int. Symp., Dallas, TX, May 1990, pp. 1502-1505.
  6. W. A. Imbriale and R. E. Hodges, "The linear-phase triangular facet approximation in physical optics analysis of reflector antennas," Appl. Computat. Electromagn. Soc., vol. 6, no. 2, Winter 1991.
  7. Y. Rahmat-Samii and V. Galindo-Israel, "Shaped reflector antenna analysis using the Jocobi-Bessel series," IEEE Trans. Antennas Propagat., vol. AP-28, pp. 425-435, July 1980.
  8. A. C. Ludwig, "Near-field far-field transformations using spherical-wave expansions," IEEE Trans. Antennas Propagat., vol. AP-19, pp. 214-220, Mar. 1971.
  9. T. S. Bird, "Antennas by field correlation," Proc. Inst. Elect. Eng., vol. 129, pp. 293-298, pt. H, 1982.
  10. M. S. Esquivel, "Optimizing the G/T ratio of the DSS-13 34-meter beam-waveguide antenna," Telecommun. Data Acquisition Progress Rep. 42-109, Jet Propulsion Lab., California Inst. Technol., pp. 152-161, May 1992.
  11. T. Cwik and J. C. Chen, "DSS-13 phase II pedestal room microwave layout," TDA Progress Rep. 42-106, Jet Propulsion Lab., California Inst. Technol., pp. 298-306, Aug. 1991.
  12. S. A. Brunstein, "A new wideband feedhorn with equal E- and H-plane beamwidths and suppressed sidelobes," Deep Space Network, Space Programs Summary 37-58, Jet Propulsion Lab., California Inst. Technol., vol. 2, pp. 61-64, July 1969.
  13. P. D. Potter, "Improved dichroic reflector design for the 64-meter antennas S- and X-band feed systems," Tech. Rep. 32-1526, Jet Propulsion Lab., Pasadena, CA, vol. 19, pp. 55-62, Feb. 1974.
  14. J. R. Pyle, "Cutoff wavelength of waveguides with unusual cross sections," IEEE Trans. Microwave Theory Tech., vol. MTT-12, pp. 556-557, Sept. 1964.
  15. J. C. Chen and P. H. Stanton, "Effect of corner radius on the performance of an S/X-band dichroic plate with Pyleguide aperture," Jet Propulsion Lab. Interoffice Memo. 3327-92-078, Jet Propulsion Lab., Pasadena, CA, Nov. 1992.