2000 IEEE.
Personal use of this material is
permitted. However, permission to reprint/republish this
material for advertising or promotional purposes or for
creating new collective works for resale or redistribution
to servers or lists, or to reuse any copyrighted component
of this work in other works must be obtained from the
IEEE.
IEEE Journal of Lightwave Technology
Volume 18 Number 3, March 2000
Table of Contents for this issue
Complete paper in PDF format
New Full-Vectorial Numerically
Efficient Propagation Algorithm Based on the Finite Element Method
S. S. A. Obayya, B. M. A. Rahman, Senior Member, IEEE and H. A. El-Mikati
Page 409.
Abstract:
A new full-vectorial beam propagation algorithm based on the
versatile finite element method, in order to accurately characterize three-dimensional
(3-D) optical guided-wave devices, is presented. The computationally efficient
formulation is based on the two transverse components of the magnetic field
without destroying the sparsity of the matrix equation. The robust perfectly
matched layer (PML) boundary condition is incorporated into the formulation
so as to effectively absorb the unwanted radiation out of the computational
domain. The efficiency and precision of the proposed full-vectorial propagation
approach is demonstrated through the analysis of single optical waveguide,directional couplers, and electrooptic modulator.
References
-
B. M. A. Rahman and J. B. Davies, "Finite-element analysis of optical and microwave waveguide problems", IEEE Trans. Microwave Theory Tech., vol.
32, pp. 20-28, 1984.
-
T. Wongchareon, B. M. A. Rahman and K. T. V. Grattan, "Electro-optic directional coupler switches characterization", J. Lightwave Technol., vol. 15, pp.
377-382, Feb. 1997.
-
M. Rajarajan, B. M. A. Rahman, T. Wongchareon and K. T. V. Grattan, "Accurate analysis of MMI devices with two-dimensional confinement", J. Lightwave Technol., vol. 14, pp. 2078-2084, Sept. 1996.
-
M. D. Feit and J. A. Fleck, "Computation of mode properties in optical fiber waveguides by a beam propagation method", Appl. Opt., vol. 19, pp. 1154-1164,
1980.
-
Y. Chung, N. Dagli and L. Thylen, "Explicit finite difference vectorial beam propagation method", Electron. Lett., vol. 27, no. 23, pp.
2119-2121, 1991.
-
J. Van Roey, J. Van der Donk and P. Lagasse, "Beam-propagation method: Analysis and assessment", J. Opt. Soc. Amer., vol. 71, no. 7, pp.
803-810, 1981.
-
P. C. Lee and E. Voges, "Three-dimensional semi-vectorial wide-angle beam propagation method", J. Lightwave Technol., vol. 12, pp.
215-225, Feb. 1995.
-
F. Schmidt, "An adaptive approach to the numerical solution of Fresnel's wave equation", J. Lightwave Technol., vol. 11, pp. 1425-1434, Sept. 1993.
-
K. Hayata, A. Misawa and M. Koshiba, "Split-step finite element method applied to nonlinear integrated optics", J. Opt. Soc. Amer. B, no.
9, pp. 1772-1784, 1990.
-
E. Montanari, S. Selleri, L. Vincetti and M. Zoboli, "Finite-element full-vectorial propagation analysis for three-dimensional z -varying optical waveguides", J. Lightwave Technol., vol. 16, pp. 703-714, Apr. 1998
.
-
J. P. Berenger, "A perfectly matched layer for the absorption of electromagnetic waves", J. Comput. Phys., vol. 114, no. 10, pp.
185-200, 1994.
-
M. Koshiba, Y. Tsuji and M. Hikari, "Finite element beam propagation method with perfectly matched layer boundary conditions", IEEE Trans. Magn., vol. 35, pp. 1482-1485,
1999.
-
F. Fogli, G. Bellanca and P. Bassi, "TBC and PML conditions for 2D and 3D-BPM: A comparison", Opt. Quantum Electron., vol. 30, pp. 443-456, 1998.
-
W. P. Huang, C. L. Xu, W. Lui and K. Yokoyama, "The perfectly matched layer (PML) boundary condition for the beam propagation method", IEEE Photon Technol. Lett., vol. 8, pp. 649-651, May 1996.
-
G. R. Hadley, "Transparent boundary condition for the beam propagation method", Opt. Lett., vol. 16, no. 5, pp. 621-626, 1991.
-
G. R. Hadley, "Wide-angle beam propagation using Pade approximation operators", Opt. Lett., vol. 17, no. 10, pp. 1426-1428, 1992.
-
C. L. Xu, W. P. Huang and S. K. Chaudhuri, "Efficient and accurate vector mode calculations by beam propagation method", J. Lightwave Technol., vol. 11, pp.
1209-1215, July 1993.